McGrathLocks MLNX5 Black Digital Lock User Manual
- June 13, 2024
- McGrathLocks
Table of Contents
McGrathLocks MLNX5 Black Digital Lock User Manual
Model Instructions
Description
This 5 in 1 digital door lock represents a classic easy entry option for your home. A stylish door lock with a Bluetooth App, pin code, RFID card and fingerprint, manual key to provide quick and convenient access.
Specifications
- Unlocking methods: Bluetooth App, RFID Card, Pass code, Fingerprint, Wristband or Key
- App name: TT lock
- Material: Aluminium Alloy
- Colour: Black, Silver
- Panel size: L 240(mm)*W 60(mm)
- Communication mode: Bluetooth 4.0 above
- Support system: Android 4.4 /IOS 7.0 above
- Power supply: DC6V, 4pcs alkaline battery
- Battery life: 10,000 times normal open (12 months)
- Static current: 45Ua
- Dynamic current: <200Ma
- Unlock time: 1-1.5 seconds
- IP Rating: IP65
MLNX5 Digital Lock
Mortises dimensions
Pls choose the right mortise for your door
Single Latch (60mm)-Black
Pls choose the right mortise for your door *22240 (60 72)-Black
**
Pls choose the right mortise for your door Single Latch (70mm)-Black
Lock Dimensions
Scan to download TT lock
INFORMATION AND SAFTY WARNINGS :
Introduction:
This user manual will guide you through the functions and usages of our MLNX5
Bluetooth enabled smart lock. It is important that you follow the instructions
and regard all notes that appear throughout this manual. Consult this manual
before you attempt to use the lock. If you have questions not answered by this
manual or are in need of non-routine service, contact our customer service
(Phone Number)
Safety Warnings:
When reading this manual, note these icons: notes with this icon MUST be read,
understood and obeyed to prevent injury or damage.
General Usage:
- This lock shall only be used as described in this manual.
- Verify that all parts of the lock are account for. If any parts are missing, contact our customer service.
- In factory default status, the lock is on always open state after you install the lock (no power on). It means handle is free and lock can’t be closed, you have to power on the lock with batteries or set admin and pair the lock with app and then the open mode will be changed to private mode automatically.
- Handle directions are reversible, please kindly follow chapter 4 (installation steps3) to change the direction. Should you have any problem, please contact our customer service.
- There is a protective film on the front touch panel, if there are some scratches on the film, don’t be scared. The protective film can be removed if you need.
- Use only four AA batteries. Do not mix old and new batteries or batteries from different brands. Never insert objects into the lock other than batteries as described in this manual.
- Verify all surfaces are flat and level before beginning installation, installation on doors or surface with any types of deformity such as gaps or warping may cause the lock to malfunction or fail to operate entirely.
- Never apply any cleaner directly to any part of the lock. Only use clean water and mild cleaner on a soft non-abrasive cloth when cleaning.
- Potential shock warning: do not allow water or liquids to get into lock’s electric parts.
- The lock must be used with TT lock app. The lock will function without the app but full functionality may only be achieved when the app is used.
PREPARING TO INSTALL
Line Drawing
Draw a horizontal centre line inside and outside the door at 1 meter from the
ground. Fold the hole template, make the handle centre line align at the door
horizontal centre line, then draw out the hole lines at front and side.
Determining Lever Handing:
The hand of the door is determined from the secure side of the door. The term “secure” means the side from which you initially unlock and enter from outside.
The hand of a door is determined from the secure side of the door. The term “secure” means the side from which you initially unlock and enter.
Left door opening
Right door opening
EXPLODED VIEW
| 1. Outer panel | 6. Connecting screw | 11. Front handle |
|---|---|---|
| 2. Connecting column | 7. Back handle | 12. Knob |
| 3. Lock body | 8. Lock body fixing screw | 13. Anti lock pick up |
| 4. Square bar | 9.Emergency power supply | 14. Lock body |
| 5. Battery case cover | 10. Lock core | 15. Setting key |
SYSTEM SPECIFICATION
| Connectivity | Bluetooth 4.0, Wi-Fi (Wi-Fi Bridge required) |
|---|---|
| Identification Mode | TTLock App, Fingerprint, Card (Mifare 13.56 MHz), Code |
and Bluetooth
User Capacity| 120
Identification Time| Instant recognition under 0.3 seconds
Code| User-defined 4-8 digit
Keypad Backlight| Yes
Temporary Code or Ekey| Yes
Compatible Smartphone| iOS7.0 or above, Android 4.4 or above
Remote Access| Yes, Wi-Fi Gateway
Mechanical Key Override| Yes
Micro-USB Backup Power Interface| Yes
Working Voltage| 6 V (4 X Alkaline AA Batteries)
Working Temperature| External Assembly: -4 °F ~ 149 °F (-20 °C ~ 65 °C)
Internal Assembly: 14 °F ~ 131 °F (-10 °C ~ 55 °C)
Battery Life| Up to 12 months (10,000 times access)
Compatible Smart Home Ecosystem| Alexa and Google Assistant (Wi-Fi Gateway is
required)
Hardware Type| Lever
Door Thickness| 38 – 55 mm
Door Handing| Reversible (Left and Right)
IP Rating| IP65
Finish| Satin Nickel or Black
Warranty| 12 Months
Available Mortice| 60mm
Tubular Latch| 60mm,70mm
Working Humidity| 10%~95%
Factory Passcode| 123456, after setting, factory passcode will be invalid
WiFi Gateway| Available(Optional)
Unlock time| 1-1.5 seconds
Dynamic current| <200mA
Static current| 45uA
Packaging list (Single tongue)
Packaging list:
| Outer panel | x1 | Battery | x4 |
|---|---|---|---|
| Inner panel | x1 | Parts | x1 |
| Lock body | x1 | IC card | x2 |
| Accessories | x1 | User manual | x1 |
| Mechanical key | x2 | QC | x1 |
Change Handle
Adjust the Front Handle Direction
- Remove the cross screw in the figure, turn the handle 180 degrees in the direction of the arrow.
- After adjusting the handle direction, install the screw and complete the reversing
