Diso MH-807C-B True Wireless Bluetooth Earbuds User Manual

Diso MH-807C-B True Wireless Bluetooth Earbuds

Auto Power on/off

When you pick up earphones from case, earphones will automatically power on, Indicator lights blink.

Important:

• If earphones are taken out from case, indicator lights do not blink and can not turn on automatically, means batteries are low; please recharge case and earphones.
• If earphones can not turn on automatically, please touch 2 seconds to manually power on.
• When you put earphones into case, earphones will automatically power off and charge.
• If earphones and Bluetooth do not connect in over 2 minutes, earphones will automatically power off.

Auto Pairing with Mobile Phone

Dual earphones connect with mobile phone

1. Take dual earphones from case, dual earphones automatically power on and pair.
2. One earphone will blink green, another earphone will blink red and green intermittently.
3. Go to Bluetooth settings and choose”Diso 80r to connect.
4. To use earphones again, just pick up earphones from case, earphones will automatically connect to mobile phone.

Left and right earphone can be connected individually with mobile phone

1. Pick up left or right earphone individually from case, earphone’s indicator light will blink red and green intermittently.
2. Go to Bluetooth settings and choose”Diso 807″ to connect.

Important:
If earphones and Bluetooth do not connect in over 2 minutes, earphones will automatically power off.

Key Functions

Change Ear Tips

Choose the most comfortable fit for your ears. For example, use small ear tip for large ear canal will not seal well, will decrease bass, but can better hear environment sounds.

How to Wear or Change Sport Ear Hooks

• During sports activities, if normal ear hooks become loose, please change to sport ear hooks.
• If sport ear hooks are worn in reverse direction, it would affect its stability in wearing and can not recharge in case.

Charge

Charge case
Connect cable to Type C port and USB adapter. The indicator lights blink while charging, and will be always on when case fully charged.

Charge earphones

• Place earphones into case, indicator lights blink red when charging. When fully charged, indicator lights green for one minute and extinguishes.
• If earphones are taken out from case, indicator lights do not blink and can not turn on automatically, means batteries are low, please recharge case and earphones.

Products and Accessories

Specifications

Bluetooth

Distance

| V 5.0

10 m

| Case charges earphones

Total playing time

| > 3tlmes

> 20 h

---|---|---|---
Talking lime

Playing time

| Sh

Sh

| Operating environment

Distortion

| -S’C~40’C

< 0.3%

Output power

FCCID

| 5mW+5mW YILMH-807| SIN| > 70dB

Troubleshooting

Mobile phone unable to find Bluetooth earphone or left and right earphones cannot connect and pair: Put earphones inside case–+take them out to find· Diso 001 to connect–+if still unable to find· Diso 807 or connect–+reset to factory setting: put dual earphones back into case- touch dual earphones 10 seconds- Android: take out dual earphones to find· Diso 807″ to connect–+ Apple System:delete existing Diso 807 “–+take out dual earphones to find
Also 807 ·, touch It to connect.

If earphones get stuck or break off when talking and listening to music, it might be because:

• The earphone is low on battery, please charge.
• Mobile phone and earphone distance is over 10 meters.
• There is obstacle between mobile phone and earphones, ie. wall.
• In a complicated Wi-Fi signal environment.

Warning

• Please do not use earphones when driving, riding bicycle, or crossing street.
• When doing outdoor sports, please use smaller ear tips to listen to environment sounds. Bass will decrease.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference In a residential Installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that Interference will not occur In a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warranty Card

Warranty Instructions:
Thank you for purchasing our products. To protect your legal rights, please read following items: This card is a product warranty certificate. Please provide card together with the product to our company for any after-sales repair.
This warranty card Is only val Id for product use within the scope of the following:

• The company products obtained through legitimate and formal channels.
• Non-human damaged product, including but are not limited to unauthorized removal, unloading, improper use, natural disasters and so on.
• Does not exceed the product warranty period of 1 year.

DISOINC
www.disosport.com
Email: diso@disosport.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>