OEM R2 Wireless Car Charger User Manual
- June 5, 2024
- OEM
Table of Contents
Wireless Car Charger
Product Features
- Smart touch button on the top of back and the LED indicator on both sides, fully automatic induction, one hand operation
- Built-in wireless charging tansmitter, support qi wireless charging for all Qi-enabled smart phones
- Anti-slip silicone on both arms and feet, Type-C charging port
- Lower charging temperature and high char9 efficiency
- FOD function: when put metal or magnet objects on the charger, the fixation clamp would close automatically and hold tightly. Meanwhile, the indicator light flashes
- Perfect protective function based on over-voltage, over-current,over-temperature and short-c, cu,t protection
Product Specifications
Model: R 2
Output: 15W(Max)
Input: 12V/1.5A 9V/2A 5V/3A
Operation Frequency: 110-205KHZ
Charger Efficiency: ≥73%
Charger Distance: 2-Bmm
Material: ABS
Size:132·55·24mm
Package List
Car Wireless Charger1
Air Vent Clip1
Sucker bracket1(optional)
Type-C Cab1e1
User Manual*1
Fast wireless charging requires QC 3.0 quick car charger
Product construction
Product Operating Guide
- When the car wireless charger powers on. the indicator light would flash two tomes, and the f1xat1on clamp would open automate, cally. The indicator loght powers off when power standby
- When inserting the mobile phone with wireless charging function Into the car wireless charger, the fixation clamp would close automatically and hold the phone tightly, then start to charge. Meanwhile, the indicator light beathes. Only need to touch the power button to release two arms if you want to take out the phone.
- When inserting the mobile phone without wireless charging function or other metal obJect, the f1xat1on clamp would close automatically and hold tightly. Meanwhile, the indicator light flashes
- The LED indicator light wlll flashes and the product stop charging when the curent Is too lage or there Is foreign object. Do not wireless charging the phonemiler situation happened
- Please purchase the wireless receiver module ocase separately (Not included in the product) 11 your phone do not support wireless charging
Attention
- Please do not vigorously extrude or collide
- Please do not dismantle or put ,t into fire or water when the product is power on, to avoid shot circuit or leakage
- Please do not use,n severly high temperature, high humidity or corrosive environment, to avoid damage to the circuit leakage.
- Please do not put the magnetic strip or chip cad (Such as ID card, bankcard etc) on the charging pad to avoid to cause magnetic card lose efficacy 5Please do not put the metal (Such as coin etc.) on the charging pad when charging, to avoid damage from heating
Wireless Car Charger R2
Product Features
- Smart touch button on the top of back and the LED indicator on both sides, fully automatic Induction, one hand operation
- Builtin wireless charging transmitter, support qi wireless charging for all Qi-enabled smart phones
- Anti-slip silicone on both arms and feet, Type-C charging port
- Lower charging temperature and high charging efficiency
- FOD function: when put metal or magnet objects on the charger, the fixation clamp would close automatically and hold tightly. Meanwhile, the indicator light flashes
- Perfect protective function based on over-voltage, over-current. over-temperature and short-circuit protection
Product Specifications
Model: R 2
Output: 15W(Max)
Input: 12V/1.5A 9V/2A 5V/3A
Operation Frequency: 110-205KHZ
Charger Efficiency: ≥73% Charger
Distance: 2-Bmm
Material: ABS
Size:132’65’24mm
Package List
Car Wireless Charger1
Air Vent Clip1
Sucker bracket1(optional)
Type-C Cab1e1
User Manual*1
Fast wireless charging requires QC 3.0 quick car charger
Product construction
Product Operating Guide
- When the car wireless charger powers on, the indicator light would flash two times, and the fixation clamp would open automate, celly. The indicator light powers off when power standby.
- When inserting the mobile phone with wireless charging function into the car wireless charger, the f1xat1on clamp would close automatically and hold the phone tightly, then start to charge. Meanwhile, the indicator light breathes Only need to touch the power button to release two arms 11 you want to take out the phone
- When inserting the mobile phone without wireless char9 function o other metal object, the fixation clamp would close automatically and hold tightly. Meanwhile, the indicator light flashes.
- The LED indicator light will flashes and the product stop charging when the curent is too lage or there is foeign object. Do not wireless charging the phone if similar situation happened
- Please purchase the wireless receiver module or case separately (Not included in the product), if your phone do not support wireless charging
Attention
- Please do not vigorously extrude or coIllde
- Please do not dismantle or put, into fire or water when the product is power on, to avoid short circuit or leakage
- Please do not use, to severely high temperature, high humidity or corrosive environment, to avoid damage to the circuit leakage.
- Please do not put the magnetic strip or chip card (Such as ID card, bankcard etc) on the charging pad to avoid to cause magnetic card lose efficacy
- Please do not put the metal (Such as coin etc.) on the charging pad when charging, to avoid damage from heating
FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>