moshi 99MO022213 Porto Q 5K Portable Battery with Built-in Wireless Charger User Guide abhi fahad bata rha tha kehta yeh bc sab chair rhy hoty ajj inko set krta
- June 5, 2024
- moshi
Table of Contents
Moshi 99MO022213 Porto Q 5K Portable Battery with Built-in Wireless
Charger
Instructions
Wireless charging
on the go Place your phone on top of Porto Q 5K and press the charging button
to begin wireless charging.
Wireless charging pad
at home Plug the USB-C cable into any USB-C wall charger (not included). A
USB-PD or QuickCharge™ 9 V charger is required to enable the fast-charging
protocols of Apple (7.5 W) and Samsung (9 W).
Charging with a cable
Use Porto Q 5K’s built-in battery to charge devices and accessories with a
cable. Connect a USB-A charging cable (USB-A to USB-C, micro USB, or
Lightning; not included) to the port on the Porto Q 5K to charge another
phone, device, or accessory. Porto Q 5K’s USB-A port outputs up to 12
W.
Recharging Porto Q 5K
Plug the included USB-C to USB-C cable into Porto Q 5K’s USB-C port (input
only), and then into a USB-C power source such as a wall or car charger. A
power source providing at least 12 W is recommended for faster
recharging.
Troubleshooting
- Flashing LED (FOD)Remove any metal objects like coins or keys between your device the charging pad. If the problem persists, please contact support@moshi.com.
- Placement: Center your device on the charging pad.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.IC Statement
IC Statement
This device complies with Industry Canada RSS-210. Operation is subject to the
following two conditions: (1) this device may not cause interference, and(2)
this device must accept any interference, including interference that may
cause undesired operation of the device. The device meets the exemption from
the routine evaluation limits in section 2.5 of RSS 102 and compliance with
RSS-102 RF exposure, users can obtain Canadian information on RF exposure and
compliance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>