Huizhou Hui Yang Intelligent Technology 7141-35 Superior Wireless Charging Stand Kit Instruction Manual
- June 5, 2024
- Huizhou Hui Yang Intelligent Technology
Table of Contents
Huizhou Hui Yang Intelligent Technology 7141-35 Superior Wireless
Charging Stand Kit
OverView
Features:
- LED Indicator
- Charging Pad Surface
- Phone Stand
- TPC USB charging Port
- USB to AC Adaptor
What’s included:
- 1 x Wireless Charging Stand
- 1 x USB to Micro Charging Cable
- 1 x UL Listed QC 3.0 AC Adaptor
- 1 x Instruction Manual
Tech Specifications
- Input power: 5V/2A, 5V/1A
- Output power: 5W~10W,
INSTRUCTIONS:
-
Charging Mobile Devices:
- Ensure that your phone or tablet supports wireless charging. It will be listed in the manufacturer’s specifications. If not, add a wireless receiver to your phone to enable it with a wireless charging function.
- Connect the wireless charging pad to the provided UL Listed QC3.0 AC adapter with the provided cable. Once connected LED Indicator will flash RED & BLUE for one second.
- Place the enabled device on the surface of the wireless charging pad. The LED will turn BLUE to indicate that the phone is charging.
Note: To achieve a fast charge function, only use the provided cable and UL listed AC adapter.
-
Phone Stand:
- Remove phone stand(3) from the back of the charging pad that is magnetically connected.
- Insert flat side of the stand through the slot of the charging pad.
SAFETY PRECAUTIONS:
Read all the instructions before using the product.
- Do not use it on an aircraft or in a hospital.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not expose the device to any moisture.
- Do not use the device in excess of its output rating. Overloaded outputs above rating may result in a risk of fire or injury.
- Do not use the device if damaged or modified. The damaged or modified device may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not disassemble the device. Take it to
- Qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury.
- Do not expose the device to fire or excessive temperature. Exposure to extreme heat may cause an explosion.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- This device is not a toy.
- Do not overcharge your Phone. The unit may get hot with excessive use. Remove the Phone when it is fully charged. Never charge for more than 7 hours at a time.
KEEP OUT OF REACH OF CHILDREN
DEVICES:
Compatible with WPC Qi V1.2.4 latest standard, support A11 or A11a coil, support 5W, Apple 7.5W, Samsung 10W charging.
iPhone 8/8Plus/X,Samsung Galaxy S8/ S8+/S7/S7 Edge/S6/S6 Edge, Nokia Lumia 1020/920/928, HTC 8X, HTC Droid DNA, HTC Rzound, HTC Incredibly 4G LTE, Moto Droid Turbo, Motorola Moto 360 Smart Watch, Moto Droid Maxx, Droid Mini, Google Nexus 6/4/5/7 (2013), LG D1L, LG LTE2, LG G2 (Verizon), Blackberry Z30 (Verizon)
FCC statement:
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>