MIDCO Pace RGN110 HD Digital Receiver Installation Guide
- June 6, 2024
- MIDCO
Table of Contents
MIDCO Pace RGN110 HD Digital Receiver
Use this guide for easy steps to start watching TV.
Prefer to follow along on your mobile device?
Go to Midco.com/Setup
Required to Start:
• Midco HD digital adapter
• Midco HD digital adapter serial number
• Remote with two AA batteries and user guide
• Power cord
• Coax cable
• HDMI cable
• Your in-home TV
Take Note of Your Serial Number
On the bottom of your equipment, find the serial number.
This example is not your equipment serial number.
Connect Your Equipment
-
Connect the coax cable to an active cable wall outlet, and then to the Cable In connection on your HD digital adapter. Make sure the connection is finger tight.
Tip: Not all in-home cable wall outlets are active. Try multiple outlets if the first one doesn’t work. -
Connect the HDMI cable from your HDMI connection on your HD digital adapter to the HDMI connection on your TV.
If you don’t have an HDTV, connect a coax cable from the To TV connection on the back of your adapter to the coax/antenna/cable in connection on the back of your TV. Make sure the connection is finger tight. -
Plug the power cord into your HD digital adapter and then into an electrical outlet. If your power outlet can be turned off by a light switch, be sure the switch is set to ON. You’ll know it’s powered on when you see a green power light on the digital receiver.
-
Turn on your TV, and make sure your volume is on.
-
Using your TV remote, change the TV input setting to the proper HDMI input you used to connect the HD digital adapter.
Activate Your Equipment
Once everything is connected properly, go to
Midco.com/CableTVSupport, and enter your HD
digital receiver serial number to activate your equipment.
Although you may have working channels, your HD digital receiver needs to
activate to ensure you receive the correct channels in your cable package.
Confirm Channels
After activation, confirm that a TV picture shows, and that your channel
lineup and on-screen guide are loading. This may take up to 15 minutes to
begin, and full program information may take one hour to completely load.
Press Guide on your Midco remote to scroll and confirm you’re receiving the
channels provided in your cable package.
Program Your Remote
Program your Midco remote control to your TV. Refer to the user guide provided with your remote, or visit Midco.com/CableTVSupport, and select Remote Controls for help.
Troubleshooting
Why isn’t my digital receiver working?
- Check your TV input or source. Your TV can connect to multiple media devices through HDMI and other inputs. Press the input or source button on your remote repeatedly, or use the arrow buttons on the remote to select the proper input type.
- Check your physical connections. Check the cables you have connecting your HD digital receiver to your TV and to the cable outlet. Tighten any cables if they are loose.
- Try other cable outlets. Not all in-home outlets are active. Repeat activation each time you connect your HD digital receiver to a cable wall outlet. If you’ve tried multiple outlets and still can’t connect, contact us.
Why isn’t my TV working?
- No TV picture: Try switching your HDMI input on your TV. If you don’t have an HDTV, try changing the channel on the back of your HD digital adapter to match your TV channel. Also check cables between your equipment, TV and cable outlet to ensure they are finger tight.
- Guide not loading: It may take up to 15 minutes for your guide to begin loading and up to an hour to completely load.
- No sound: Check if your TV is muted. Press the mute button on your remote to unmute the audio.
Additional Resources
Check out Midco.com/CableTVSupport for a
variety of resources. Learn how to program your remote, use your on-screen
guide and more.
Return Old Equipment
If you have old Midco equipment, be sure to return it. Just package it up in
the box that came with your new digital adapter, which also includes a prepaid
return label.
Need help?
Setup Guide
Midco.com/Setup
Online Support
Midco.com/Support
Contact
Text: 64326
Social & Chat Support: Midco.com/Contact Phone: 1.800.888.1300
© 2020 Midcontinent Communications. All rights reserved. Updated April 2020.
RS11_001_03_0420
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>