Dongguan Boxinda Electronic Technology B-20 3 in 1 Charger Dock User Manual

Boxinda Electronic Technology
B-20 3-in-1 Charger Dock
User Manual

B-20 3-in-1 Charger Dock

Foreword
Dear users, thank you for purchasing our products. In order to learn more about the product, Please read this manual carefully before use. Have a nice experience

Product parts and their descriptions

1. Mobile phone charger socket
2. Wireless charging watch
3. 3 Headphone charging socket
4. Indicator light
5. Vent
6. Type-c interface

Instructions for use

• Turn on the power, the product enters the standby state;
• Plug your phone and AirPod into the cradle to charge；
• Place the watch on the watch charging position for wireless charging;
• After charging is completed, disconnect the power supply and organize the product;

How to solve abnormal charging

• Please confirm whether your mobile phone has a wireless charging function before use;
• Check if the phone deviates from the wireless inductive charging area of the charger;
• Whether a non-metallic protective case is used for charging the mobile phone, the thickness of the protective case is recommended not to exceed 4 mm
• When a metal object rotates in the charging area, the charger will automatically identify and conduct power failure protection.
• When the charger temperature is too high, the protection will be automatically activated.
  Please unplug the power supply first and wait for the charger to return to the temperature before using it.

Frequently Asked Questions

Why do wireless charging and induction products generate heat when charging?****

– During the charging process, there will be a certain amount of magnetoelectric conversion loss, and this part of the loss will be converted into heat, causing the phone and the charger to generate heat, which is a normal phenomenon.

Suggest：

• When the device is fully charged, please disconnect the charging in time to avoid long-term cycle charging, which will cause the product and the charger to continue to heat;
• When the mobile phone is charging, please close its background software

Precautions

• It can only be used indoors or in a dry environment, and avoid placing or using it in an environment with high temperature, humidity, strong static electricity, and strong magnetic fields;
• For your safety, please do not plug and unplug electrical appliances with wet hands;
• Keep out of reach of babies and children;
• Do not use if the product gets into water or is stuck with dirt or dust;
• Non-professionals are not allowed to disassemble and repair without authorization.

Product Specifications

Model: B-20
Input：5V 3A
Mobile phone output: 10W
Headphone jack output: 5W
Watch output: 2W
Material: ABS+PC
Color: black and white
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top of the surface of the device must be respected.
FCC ID: 2A4OE-B-20

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>