Dongguan Boxinda Electronic Technology B-17 3-In-1 Magnetic Wireless Charger User Guide

3 in 1 Magnetic Wireless Charger
User Guide
(Model: B-17)
User Guide

Features of Product

1. 3 In 1 Magnetic Wireless Charger
   • Magnetic volretess charger for Phone 12 mini 112 /12 Pro 112 Pro Mm for iPhone 13 mini /13 /13 Pro /13 Pro Max.
   • VVIreless charger for earphone.
   • Wireless charger for Watch.

2. Compact Design: Simple and strong, easy to use and carry.

3. Suitable for Use: Home, hotel, office, restaurant haunts. (Indoor use only)

Specifications

Product Diagram

1. Wireless Charger for Ptbone
   • Magnetic Charger for!Phone 12 mini 112 /12 Pro /12 Pm Max
   • Magnetic Charger for!Phone 13 mini 113 /13 Pro /13 Pro Max

2. Wireless Charger for earphone

3. Wireless Charger for Welch

4. LED Light (3 Brightness Modes)

5. Touch Switch for LED Light (B)TypeC Input

How to use

1. Connect 5-17 to PD/QC quick charger by USB cable.
   Attention: The Input must be 9W2A or 12/2A Charger.

2. Foldable watch charger
3. Charge your devices. (1) Plug in the type-C plug input cable
(2) Connect the GC3.0 (or PD) quick charger
(3) Charge your iPhone 12113
(4) Charge your earphone
(5) Charge your iWatch

4. LED light status:

(1) Power and standby: The LED light is off.
(3) Phonsisarphonahvatch charging status: The LEO light is off.
(4) nun on the light: Press the touch switch (5).
(5) Adjust the brightness: Pressing touch smith (5) to adjust the 3 brightness modes.

Safety Tips

Please adhere to these basic precautions while using this product, as follows:

1. Read all the Instructions before use
2. This product can be normally used between the temperatures of 32°F (0°C) to 95°F(35″C).
3. Do not expose the device to fire or excessive temperature. Exposure to fire or excessive temperatures may cause an explosion.
4. Do not expose the device to moisture.
5. Keep away from water or other liquids which may lead to short circuits while using the product.
6. Close supervision is necessary when the products are used near children.
7. Do not use this wireless charger rf damaged or modified.
8. Do not disassemble the device. Incorrect reassembly may result in a risk of fire or injury.
9. Ensure that qualified service professionals use only identical reptacernert parts to ensure product safety.
10. Accessories placed on the back of your smartphone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove accessories from the phone before attempting wireless charging.
11. Remove your phone /watch /earphone when It Is fully charged. Please unplug the power adapter when your devices are fully charged.

FCC Information
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>