BODIOO 28GXT1 28 Portable Basketball System Instruction Manual

BODIOO 28GXT1 28 Portable Basketball System

Product Information

Specifications

• Model Number/Style: Portable Basketball System
• Item No.: 28GXT1
• Height adjustable range: 5.1ft (1.55m) to 6.9ft (2.10m)

Required Tools and Materials

• 2 Capable Adults
• Sawhorse or Support Table
• Safety Glasses
• Garden Hose or Sand (13360k0glS)b.AND AND/OR
• 1/2 (2 each) Wrenches and/or Socket Wrenches and Sockets
  (Deepwell Sockets are Recommended)

Product Usage Instructions

Moving the System to a New Location

1. Lower the backboard to the lowest position.
2. Hold the pole and lift the base.
3. When the wheels touch the ground, move the system to the desired location.
4. Put the system upright and set it on a flat ground.
5. In the new location, ALWAYS check the stability of the system before use.

Height Adjustment System

1. Two adults are required.
2. Unscrew Bolt Set (#3) from Pole (F).
3. Carefully loosen Rotary Knob (D) until the Pole (H) can be easily moved upward or downward.
4. There are five height adjustment holes on the pole (H). Use one of them to match the lock hole on Pole (F).
5. Adjust the basketball system to the desired height and tighten the Rotary Knob (D).
6. Finally, tighten Bolt Set (#3) on Pole (F).

Installing the Net

Install the Net (K) to the Rim (J) as shown below:

Filling the Base

Using Water

1. Two adults are required for assembly.
2. Fill the base with water, at least 6.6 gallons of water is required.
3. Twist the cap securely.
4. Reminder: Better to move the basketball system to an intended location before filling the base.

Using Sand

1. Two adults are required in this step.
2. Adjust the backboard to the lowest location.
3. Fill the base with sand, at least 71.6 lb. (32.5kg) of sand is required.
4. Load the sand according to Figure 1.
5. Lift the rear of the base according to Figure 2 until the sand slides into the front of the base.
6. Repeat the steps as shown in Figure 1 and Figure 2 until the filling reaches the required weight.
7. Upright the system carefully.
8. Twist the cap securely.
9. Reminder: Better to move the basketball system to an intended location before filling the base.

FAQ

• Q: Can the backboard and rim support a player hanging from it?
• A: No, the backboard and rim are not designed to support a player hanging from the rim or net.
• Q: What is the customer service contact information?
• A: You can reach our customer service through the following channels:
• Email: service@gx9sports.com
• Toll-Free Customer Service Number for U.S: 626-313-8956

Parts list

Small Parts in Blister Pack (Bolts Screws)

REQUIRED TOOLS AND MATERIALS

• STEP 1 Put the Base (A), Pole (C) and Wheel (B) in place. Insert the Axle (G) as shown below.

• For better stability, ensure the Axle (G) is tight to the Base (A).

• STEP 2
  1 . Connect Brace (E) to Base (A) with Bolt Set (#2).
  2 . Connect the other end of Brace (E) to Pole (C) with Bolt Set (#1)

• STEP 3
  Connect Pole (F) to Pole (C) with Bolt Set (#3)
  ATTENTION:
  1. When connecting the Pole (F), use the end with no preinstalled Lock Nut.
  2. Ensure the preinstalled Lock Nut faces the back of the Basketball System .

• STEP 4 Connect the Rim (1), Backboard (I) and Pole (H) together with Bolt Set (#4).

• STEP 5 Connect Pole (F) and Pole (H) with Bolt Set (#3) and Rotary Knob (D).

• STEP 6 Install the Net (k) to the Rim (J) as shown below

• STEP 7 Fill the base with water

WARNING!

READ AND UNDERSTAND OPERATOR’S MANUAL BEFORE USING THIS UNIT. FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY.

CONTACT

• Customer Service Mailbox:
• service@gx9sports.com
• Toll-Free Customer
• Service Number for the U.S
• 626-313-8956

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>