HEAT DECOR HD-SW 500 Heating Panel Installation Guide
- May 15, 2024
- HEAT DECOR
Table of Contents
HEAT DECOR HD-SW 500 Heating Panel
Specifications
| Model | Width |
|---|---|
| HD-SW 500 | HD-SW 750 |
| HD-SW 300 | HD-SWT 400 |
Installation Steps
- Mark the positions on the wall for drilling holes using the template provided. The template corresponds to the model of the heating panel to be installed.
- Drill the holes at the marked positions using an 8 mm drill bit.
- Insert the wall plugs into the drilled holes.
- Secure the heating panel to the wall by screwing it into the wall plugs.
Safety Information
- Minimum distance of the heating panel from the floor: 30 cm
- Child-Proof Installation: Consider a higher position to prevent access by children.
Visual Diagram Description
The visual diagram displays the mounting template for different models of heating panels. There are dotted lines representing the width of the panels, with clear indications for drilling points, marked by crosses. Each cross is labelled with an “8 mm” indicating the size of the drill bit needed. The diagram shows four steps in the installation process, with illustrations depicting the marking and drilling of holes, insertion of wall plugs, and securing of the panel. Additionally, there’s a warning icon highlighting the minimum distance from the floor and a note regarding child-proof installation.
- Minimum distance of the heating panel from the floor: 30 cm
- Child-Proof Installation
FAQ
What is the minimum distance required between the heating panel and the floor?
The heating panel should be installed at least 30 cm above the floor.
How can I ensure the installation is child-proof?
Install the heating panel at a height that is out of reach of children to prevent tampering or accidents.
What size drill bit is needed for installation?
An 8 mm drill bit is required for drilling holes for the wall plugs.