EDUP EPAC1698 USB Wireless Adaptor Installation Guide
- June 5, 2024
- EDUP
Table of Contents
USB Wireless Adapter
**Quick Installation Guide**
Note: This Manual based on Windows7
-
Put in the CD and find the windows file “windows (XP, Vista,win7,win8,win10)” andSetup.exe.
-
Double click the Setup.exe file, Software begins to initialize, then click the “Next”.There shows the installation progress.
-
Do not interrupt installation, Click “Finish” to finish the driver installation. The computer automatically restarts.
Now installing REALTEK USB Wireless LAN driver
-
Plug the Wireless USB Adapter into the USB port of your PC Wireless connection (two ways to realize Wireless connection 1 :
-
Click Icon in the Windows system tray, which locates in the bottom-right corner of your computer screen, or double click and pop up a message and click”Available Network” Double-click the utility icon or right-click the icon and the Wireless Network Connection window appears then double-click the SSID you preferred.
Type the encryption key that you wrote down earlier in both
the Network key and Confirm network key boxes, and then click “ok”.
Note: if there is no icon , please
find it at the right bottom, it has been hidden as the following pictures show
Wireless Connection2. -
Click Icon which locates in the bottom-right corner of your computer screen, click the wireless network list and choose the SSID you preferred. and double click (Or click “Connect”).
This product needs to be installed on a fixed host, and the distance from the
antenna to the human body needs to be greater than 20cm
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20
cm between the radiator & your body.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.