Shenzhen Edup Electronics Technology EPEP9651 Bluetooth PCI-E WiFi Card User Manual
- June 6, 2024
- Shenzhen Edup Electronics Technology
Table of Contents
- Shenzhen Edup Electronics Technology EPEP9651 Bluetooth PCI-E WiFi Card
- Hardware Installation
- How to install the PCI-E card driver
- How to connect the PCI-E card to Wi-Fi?
- How to Install the Bluetooth driver
- How to connect the Bluetooth Earphones with the adapter
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shenzhen Edup Electronics Technology EPEP9651 Bluetooth PCI-E WiFi Card
Hardware Installation
- Open the side cover of the chassis and remove the chassis tailgate screws of the PCI-E card slot.
- Insert 1he product Into the corresponding card slot tightly, and either PCI-E/X1/XA/XS/X16 slots are available.
- Find the 9-pin USB interface on the motherboard, insert the EIXlemel wiring of 1he PCI-E card into the USB interface of the motherboard, and Install the screws to secure the bracket.
How to install the PCI-E card driver
- Please Install the driver from the Included mini CD or download the driver from our official website.
- Select proper driver to Install.
- CIiek drfver for Wln10 64blt for next step.
How to connect the PCI-E card to Wi-Fi?
- Open 1he Internet icon ■ st 1he lower right comer of 1he computer.
- Searching and connecting the WI-Fl you preferred on the detected WI-Fl 11st.
- Enter the WI-Fl password to connect.
- Finally, you are connected to the Wi-Fi.
How to Install the Bluetooth driver
- Select the proper cover to install.
- Double click 1he file to ruminal”(I, end click the “Next” button 1″1~.
- Please accept the terms of the agreement, then click the “Next” button
- Please cllck “Install”.
- The following process bar of Bluetooth culver Installation will show up.
- Click the “Finish” button when the Bluetooth driver can Install successfully.
How to connect the Bluetooth Earphones with the adapter
- Find the Bluatoo1h loon. In the lower right comer of the desktop.
- Right-click the mouse, select the “Add Device”, searchl~ the Bluetooth.
- Make sure your Bluetooth device was turned on and ready to pair.
- Bluetoo1h earphone will be detected below after a while. Double click the earphone ! con to pairing.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>