Shenzhen Edup Electronics Technology EP-AC1686 USB Wireless Adapter Installation Guide

: June 6, 2024
: Shenzhen Edup Electronics Technology

Table of Contents

Read User Manual Online (PDF format)
Download This Manual (PDF format)

USB Wireless Adapter
Quick Installation Guide

Note: Is this Manual is based on Windows?

Put in the CD and find windows file “windows (XP, Vista,win7,win8,win10)” andSetup.exe.
Double click Setup.exe file, Software begins to initialize, then click the “Next”.There shows the installation progress.
Do not interrupt installation, Click “Finish” to finish the driver installation. The computer automatically restarts.
Now installing REALTEK USB Wireless LAN Driver
Aug the Wireless USB Adapter into the USB port of your PC Wireless connection (two ways to realize Wireless connection 1 :
Click Icon in the Windows system tray, which locates in the bottom-right corner of your computer screen, or double click , and pops up a message and click”Available Network” Double-click the utility icon or right click the icon, and the Wireless Network Connection window appears then double click the SSID you preferred.

Type the encryption key that you wrote down earlier in both the Network key and Confirm network key boxes, and then click “ok”.

|
---|---

Note: if there is no icon , please find it at the right bottom, it has been hidden as following

pictures shows:
Wireless Connection2.

. Click Icon which locates in the bottom-right corner of your computer screen, dick the wireless network list and choose the SSID you preferred. and double click (Or click “Connect”).
Type the encryption key and then click -ok”.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output.

Before a new model device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are performed in positions and locations ( worn on the body)as required by the FCC. For body-worn operation, this model device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the device a minimum of 5 mm from the body. Noncompliance with the above restrictions may result in a violation of RF exposure guidelines.