GYROOR G5 6.5 Inch Wheel LED Wheel Hoverboard User Manual

June 5, 2024
GYROOR

GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-
LOGO-01

GYROOR G5 6.5 Inch Wheel LED Wheel Hoverboard

GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-PRODUCT

Riding Safety

  1. The GS is a recreational product. Before mastering riding skills, you need to practice. NeitherGyroorTechnology Co., Ltd nor Shenzhen Chitado Technology Co., Ltd is responsible for any injuries or damage caused by a rider’s inexperience or failure to follow the instructions in this docume.

  2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. Remember that whenever you ride the GS you risk injury or death from loss of control, collisions, and falls. When entering into public spaces always comply with the local laws and regulations. As with other vehicles, faster speeds require longer braking distance. Sudden braking on smooth surfaces could lead to wheel slip, loss of balance, or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas.

  3. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and provides protection for the back of your head.

  4. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, or other obstacles and potential hazards.

  5. Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Please obey local traffic laws and
    regulations if situation is different.

  6. In places without laws and regulations governing self-balancing electric veh ides, comply with the safety guidelines outlined in this manual. NeitherGyroorTechnology (CHINA) Co., Ltd nor Shenzhen Chitado Technology Co., Ltd is responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations of the safety instructions.

  7. Do not allow anyone to ride your GS on his/her own unless they have carefully read this manual, watched the safety video. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the GS, make sure each new rider wears ah el met and other protective gear.

  8. Before each ride check for loose fasteners, damaged components, and low tire pressure. If the GS makes abnormal sounds or signals an alarm, immediately stop riding. Diagnose your GS via the Gyroor scooter app and call your dealer/distributor for service.

  9. Be alert! Scan both far ahead and in front of your GS – y o u r eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).

  10. To reduce risk of injury, you must read and follow all”CAUTION”and”WARNING”notices in this document. Do not ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles. The manufacturer recommends riders should be 6+ years old. Always follow these safety instructions:

    • People who should not ride the GS include:

    • Anyone under the influence of alcohol or drugs.

    • Anyone who suffers from disease that puts them at risk if they engage in strenuous physical activity.

    • Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance.

    • Anyone whose height or weight is outside the stated limits (see Specifications).

    • Pregnant women.

    • Riders under the age of 16 years old should ride under adult supervision.

    • Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws.

    • To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others.

    • Do not ride in the snow, in the rain, or on roads that are wet, muddy, icy, or that are slippery for any reason. Do not ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and
      could cause a fall.

    • Do not accelerate or decelerate suddenly. Do not accelerate when the GS tilts back or sounds an alarm. Do not attempt to override the speed limiter.

  11. Do not attempt to charge your GS if the charger or the power outlet is wet.

  12. As with any electronic device, use a surge protector when charging to help protect your GS from damage due to power surges and voltage spikes. Only use the Gyroor-supplied charger. Do not use a charger from any other product.

  13. Use only Gyroor-approved parts and accessories. Do not modify your GS. Modifications to your GS could interfere with the operation of the GS, could result in serious injury and/or damage, and could avoid the limited Warranty.

  14. Do not sit on the steering bar. Doing so could result in serious injury and/or damage to your GS.

Packing List 

GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-
FIG2

When unpacking your GS, please verify that the above items are included in the package. If you are missing any components, please contact your dealer/distributor or nearest service center (see Contacts in the user manual). After verifying that all components are present and in good condition, you can assemble your new GS. Please retain the box and packaging materials in case you need to ship your GS in the future. Always power off your GS and unplug the charging cable before assembling, mounting.

DIAGRAM

GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-
FIG3

Charging

Do not connect the charger if the charge port or charge cable is wet. Motor Your GS is fully charged when the LED on the charger changes from red (charging) to green
(trickle charge). Close the rubber cap when not charging. GYROOR-G5-6.5
-Inch-Wheel-LED-Wheel-Hoverboard-FIG4

First Ride

There are safety risks when learning to ride the GS. You must read the Safety Instructions and follow the New Rider Tutorial in the App before your first ride. For your safety, your GS is not activated at this time and will beep occasionally after Power ON. Please download the app on the app store or google play by searching a gyro or scooter.

Learning to Ride 

GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-
FIG6

  1. Go to a large open area and ask a friend to assist you on your first ride.
    WARNING: Always step off from the back of the GS.

  2.  Lightly place one foot on the foot mat, while keeping your other foot on the ground holding your weight. Do not press the steering bar with your leg.

  3. Slowly transfer your weight onto the GS. The unit will beep, indicating it is now in Balance Mode. Slowly step on with your other foot.

  4. Stand with your weight evenly distributed on both feet and relax, looking straight ahead. GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-FIG7

  5. Gently lean your body forward and backward to control your movement

  6. To turn, gently lean left or right against the steering bar.

GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-FIG8Warnings

You must read and understand the Warnings and Safe Riding instructions in this manual before attempting to ride the GS. Failure to follow these warnings could result in death or serious injury due to: loss of balance, traction, and/or control; collisions; and falls. GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-
Hoverboard-FIG9

GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-FIG10

GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-FIG11

GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-FIG12 GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-
FIG13

Maintenance

Cleaning and Storing Your GS
Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste. then cleaned with a soft, wet cloth. Scratches on plastic parts can be polished with extra fine grit abrasive paper.
NOTE: Do not wash your GS with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your GS. Do not wash your GS with a power washer or high pressure hose.

WARNING: Make sure the GS is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning; otherwise you may expose yourself to electric shock or damage the electronic components. Store your GS in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.

Battery Pack Maintenance
Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not discard or destroy the battery. For more battery information, refer to the sticker on the battery itself, located on the bottom of the GS.
Refer to your local laws and regulations regarding battery recycling and/or disposal.
A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70° F [22° C]) the battery range and performance is at its best; whereas using it at temperatures below 32° F (0° C) can decrease range and performance. Typically, at-4° F (-20° ( ) range can be half that of the same battery at 70° F (22° ( ). Battery range will recover when temperature rises. More details are available in the APP.

SPECIFICATIONS

Dimensions| ****

Unit

| 26x 8.9x 9.3 in (660x225x235mm)
---|---|---


Weight

| Payload| 44-220 lbs (20- 100 kg)
Net| Approx. 20 lbs (9 kg)


Rider

| Recommended Age| 6+ years old. See the weight limit
Required Height| Over4ft(121cm) tall









Machine Parameters

| ****

Max. Speed

| Approx. 7.75 miles (13km/h)

Top speed varies to adapt di-erent riding manner and remai

Top speed will reduce when remaining battery life drops.

Typical Range| Approx. 3.75-7.75 miles ( 6 x 13 km)


Traversable Terrain

| Pavement, packed dirt, slopes< 30°, obstacles< 0.4 in (1 cm),gaps < 1.2 in (3 cm)
Operating Temperature| 14- 104°F (-10-40°()
Storage Temperature| -4- 122°F (-20-50°()
Max. Storage Time| Approx. 60 days(100%power) Approx. 20 days(30 %power)
IP Rating| Mainframe IP54
Charge Time| Approx. 2 hours






Battery

| Nominal Voltage| 37VDC
Max. Charging Voltage| 42VDC
Charging Temperature| 32-104°F (0-40°()
Nominal Capacity| 144 Wh


Battery Management System

| Over-voltage, under-voltage, short circuit,

and over-heating protection. Auto-sleep and auto-wake


Motors

| Nominal Power| 300Wx2
Charging Temperature| 32-104°F (0-40°()

NOTE
Typically, a fully charged battery should retain charge for 60-90 days in Standby Mode. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage caused by over-discharge or under-discharge will not be covered by the Limited Warranty.

WARNING: Do not attempt to disassemble the battery. Risk offire. No user- serviceable parts. &. WARNING
Do not ride when the ambient temperature is outside the machine operation temperature(see Specifications) because low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.

Calibration and Alarms

  • Collaboration
    When In Balance Mode, If the GS moves forward or backward on Its own on flat ground, It needs to be celebrated If the problem persists, please contactafter-sales service.

  • To collaburate the Swift Ci5
    Confirm that the hoverboard is in the off state and keep both side of the pedals parallel to the horizontal plane. Make sure the hoverboard is turned off, press and hold the power switch for S seconds and then release it. When you hear a sound, the system starts to calibrate; the red light (that is, the running indicator and the left turn indicator) flashes 3times. Wait until the red light is on, the system calibration Is complete, and you can cycle when you turn It off and on again.

  • Self-balance
    App adjustment; conversion ohelf-balance and not self-balance on app. Manual adjU$tment: Place the car horizontally- make $Ure the GS is turned on,pren the power switch for about 6 seconds, until you hear the beep, then restart the hover boa rd, the adjustment complete.

  • Child mode/ Adult mode
    App adjustment: conversion ofadult mode and child mode on app. Manual adjustment: Stand up the GS, press the power button to turn it on – release the button -then keep press. The button remains for about 6 seconds until the beep is heard and the balance hoverboard is restarted. Complete child mode switching

  • alarm

    •  Overheating Riding for an extended period oftime could increase the internal temperature of yours in excess of 122°F(SOO C). If this happens, the glow lights will flash red, an alarm will sound and your GS will not be able to charge. Simply step off the GS, power them off, and give them time to cool back down to a normal operating temperature.
    • Speeding riding will cause a lift alarm, please note the speed you set In the app.
    • Other alarms. For any other alarms, try restarting your GS. If the problem persists, please contact after-sales service.

About app  

GYROOR-G5-6.5-Inch-Wheel-LED-Wheel-Hoverboard-
FIG15

  1. CIiek the Bluetooth Icon to open the Bluetooth and enter tho Bluetooth link
  2. Showthupeed of the hoverboard.
  3. battery reminder (now It shows the battery empty,)
  4. Click this button to enter tho switch and warning pg
  5. CllckthlsbuttontD nterllghtcolorch1ng  p1ge
  6. Click this button to enter the 111odel adjustment and speed control page.
  7. Search Ille blue tooth the hoverboard
  8. Cllckthisb11ttontncontrolthe switch machine
  9. Open this function when JO• need to left hoverboard fora while, It will warning
  10. Fault Analysis-hip,011 to find the problem or the
  11. «f Light color control p19e.

Certification

This product has been tested and passed ANSI/CAN/UL-2272. The battery complies with UN/ DOT 38.3 Electromagnetic Compatibility Directive & Low-Voltage DirectiveShenzhen Chitado Technology Co., Ltd, declares that the equipment listed in this section are in compliance with the essential requirements and other relevant provisions of Directives 2014/30/EU &2014/35/E.

Trademark and Legal Statement

GYROOR and Gyroor swift G5 are trademarks of Shenzhen Chitado Technology Co., Ltd, registered in China and other countries. The respective owners reserve the rights of their trademarks referred to in this manual. The G5 is covered by relevant patents. For patent information go to http://www.gyroorboard.com.We have attempted to include descriptions and instructions for all the functions of the G5 at the time of printing. However, your G5 may differ slightly from the one shown in this document. Please note that there are multiple G5 models with different functions, and some of the functions mentioned herein may not be applicable to your unit. The manufacturer reserves the right to change the design and functionality of the G5 product and documentation without prior notice. ©2019 Shenzhen Chitado Technology Co., Ltd. All rights reserved.

Warranty

Please keep the proof of purchase (i.e., receipt) to make sure your limited warranty.

  1. 1 year for vehicle, except battery or other consumables. 6 months for battery.
    The warranty will be invalid under the following condition:

    • Open up the vehicle by an unlicensed person
    • Receiptis not in accordance with the vehicle
    • Inappropriate handling/use/maintenance of the vehicle
    • Non-compliance with the points from the manual

Following damage will be not covered by the warranty:

  • Damage on hoverboard by inappropriate handling or use
  • Damage on hoverboard by inappropriate modification or repairs
  • Damage on hoverboard by inappropriate storage
  • Damage on vehicle cause by accident
  • Hoverboard Surface damages
  • Hoverboard damage or malfunction caused by rides in the rain or soaking in water

Contact

Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your G5.
E-mail Service: service@ihoverboards.com support@ihoverboards.com
Facebook: @Gyroorboard
Instagram: gyroorboard
Website: www.gyroorboard.com
Have your order number on hand when contacting Gyro or.

FAQ

Gyroor is not responsible for damage caused by unreasonable use, please watch Gyroor’s instructional video before use. Link: https://gyroorboard.com/pages/review

  1. How to download app?
    Please download by searching'”Gyroor ‘on app store or google play.

  2. How to connect app and bluetooth speaker?
    For the app, after you download the APP of gyroor, You need to use your email to register and set a password. After the setting is successtul, you can log in to our APP with your account.after you log in the APP, you can see a sign for bluetooth on the upper left corner, cick it you will enter a new page, then choose scan, when you see the “Gyroor,dick it will show connect successfully. For connecting the bluetooth speaker of the G5, please open the bluetooth on phone setting and search, the name of Bluetooth is like “Whee- music”, then you can connect it directly.

  3. Ican not find the Bluetooth for app or Bluetooth speaker, does it support app and Bluetooth speaker function?
    The TS80 support app and bluetooth speaker function, if you can not find the bluetooth, please restart the hoverboard or phone.lfit still can not connect successfully, please try another smartphone with different system.

  4. Ican not connect the app /bluetooth, what should I do
    lf you can not connect the app or Bluetooth speaker, please restart the G5 or phone. ifit still can not connect successfully, please try another smartphone with different system. If you need,please contact Gyroor customer service.

  5. Do you have any suggestions for a new user?
    Please subscribe to Gyroorboard Facebook, we will upload teaching videos there.

    • For beginners, please practice on a fiat ground, and adjust it to child mode.
    • Step on one foot at a time.
    • having issues on stabilizing yourself,try pressing your feet against the outer edge.
    • Make sure that you have someone or something to hold on.
    • Step off backward, not forwards.
    • Tilt both your feet forward to g0 straight.
    • Tilt them back to go backward.
    • Slightly tilt your right foot to turn left.
    • Slightly tilt your left foot to turn right.
    • You can get thro ugh tighter spaces by moving the board back and forth.
    • Iry not to freak out when getting on, confidence is key, be confident and just relax.
    • Just have some fun with it for a few minutes that you can master it well.
  6. The hoverboard is shaking, it is a little dangerous, what’ s the problem?
    If shaking, it’s possible that the user’s weight is not enough for the hoverboard, you can adjust it to child mode by gyro app or adjust by hands. App adjustment: conversion of adult mode and child mode Manual adjustment: Stand up the G5, press the power button to turn it on -release the button – then kee press. The button remains for about 6 seconds until the drip sound is heard and the balance hoverboard is restarted. Complete
    child mode switching.

  7. The speed of two sides of the wheel is different/I can not turn fluently with the hoverboard/ one side of the pedals is not on the horizontal line when starting up, what should I do?
    The hoverb0ard is losing balance now, please calibrate it. Confirm that the hoverboard is in the off state and keep both side of the pedals parallel to the horizontal plane.
    Make sure the hoverboard is turned off, press and hold the power switch for 5 seconds and then release it. When you hear a sound, the system starts to calibrate; the red Ilight (that is, the running indicator and the left turn indicator) flashes 3 times. Wait until the red light is on, the system calibration is complete, and you can cycle when you turn it off and on again.

  8. Fm an experienced rider, Ido not like the self–balance, can I cancel it?
    Yes, you can cancel it , adjust it by gyro app or hands: App adjustment: conversion of self-balance and unself-balance.f Manual adjustment: Place the car horizontally -make sure the G5 is turned on, press the power switch for about 6 seconds, until you hear the dripping sound, and restart the mode to complete the mode switch.

  9. when I stop riding, the G5 is shaking heavily, is it normal?
    If you suddenly stop using and down, the G5 will shake for seconds, it caused by the strong power. We advise that you can adjust it to child mode, which would reduce the shaking. And we suggest do not stop suddenly.

  10. What should I do if there are problems with my G5?
    If you find there are some problems with a hoverboard, please contact GYROOR customer service by Facebook @Gyroorboard or email service@ihoverboards.com, support@ihoverboards.com, with a video to show the problem and your order number is also needed. your would help to solve it soon.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1.  this device may not cause harmful interference, and
  2.  this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that e case harmful interference to radio or television reception, which can be determined Dy turning the equipment off and on, the use

  • Reorient or relocate the receiving antenna. encouraged to try to correct the interference by one or more of the following measures.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals