V-TAC VT-200185 LED Flood Light Instruction Manual
- June 4, 2024
- V TAC
Table of Contents
VT-200185 LED Flood Light
Instruction Manual
TECHNICAL DATA
Model| Watts| Lumens| Beam
Angle| Long Life| DF| CRI| Input Power|
Operation
Temperature| Dimension
---|---|---|---|---|---|---|---|---|---
VT-30185| 30W| 4720| 100°| 25000H| >0.9| >70| AC:220-240V,50Hz| -20 to +40°c|
204.5x165x46mm
VT-50185| 50W| 7870| 100°| 25000H| >0.9| >70| AC:220-240V,50Hz| -20 to +40°c|
241.5×197.5x46mm
VT-100185| 100W| 15750| 100°| 25000H| >0.9| >70| AC:220-240V,50Hz| -20 to
+40°c| 299×247.5×49.5mm
VT-150185| 150W| 23600| 100°| 25000H| >0.9| >70| AC:220-240V,50Hz| -20 to
+40°G| 390×318.5x55mm
VT-200185| 200W| 31500| 100°| 25000H| >0.9| >70| AC:220-240V,50Hz| -20 to
+40°c| 458.5x371x57mm
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the
installation and keep this manual handy for future reference. If you have any
other queries, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at their best.
The warranty is valid for 5 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours of Daily operation. Usage of the product for 24 Hours a day
would void the warranty. This product is warranted for manufacturing defects
only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard.
- Replace any cracked protective shield .
- Terminal block not included.
- Proper grounding should be ensured throughout the installation.
- The minimum distance from lighted objects is 1m .
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
INSTALLATION DIAGRAM
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
INSTALLATION INSTRUCTION
-
DO NOT USE IN AREAS WITH LIMITED VENTILATION OR OUTSIDE THE RATED AMBIENT TEMPERATURE RANGE. CONNECT WITH WATERPROOF CABLE HOUSE ONLY. ENSURE ELECTRICITY IS SWITCHED OFF BEFORE INSTALLATION.
-
Please do not mount to a surface that is prone to vibrations.*
Remove the screw and the bracket afterward. (Figure 1)Before drilling, mark the hole position for fixing the bracket onto the wall (Screw not supplied). (Figure 2) -
Screw the retaining bracket to the wall with a suitable quantity of screws. (Figure 4)
-
Mount the bracket back to the fixture. Adjust the floodlight according to the desired position. Tighten the screw. (Figure 5) Connect your main cable (H05RN-F3G1.0mm2 Recommended)with the input lead of our product through the waterproof junction box. Note, the line (-) of the lead. (Need to use the junction box of IP65 or above, ensure to tighten the waterproof screw) Switch on the power to make sure the product is working. Adjust the direction angle as per your preference. (Figure 6)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>