SOUNDPEATS Free2 Classic Stylish Wireless Earbuds User Guide
- June 5, 2024
- SoundPEATS
Table of Contents
SOUNDPEATS Free2 Classic Stylish Wireless Earbuds
First Time Using
- Open the charging case lid and take out both earbuds. Two earbuds will turn on and enter pairing mode.
- When the earbuds pair successfully, the red and white lights on the main earbud will flash alternately, the white light on the secondary earbud will stay on. Now you can connect the earbuds to your device.
- Activate the Bluetooth on your device and choose “SOUNDPEATS Free2 classic” to connect.
Reset
Open the case lid, and make sure both earbuds are charging (the red lights on earbuds stay on). Press and hold the MFBs on both earbuds for 10 seconds until the red and white lights fiash twice alternately, reset complete.
Wearing
- dentify the left and right earbuds.
- Rotate earbuds and find the most comfortable position.
Product Diagram
Control
Q & A
What does the indicator on the charging case tell?
When charging the charging case, the indicator light shows:
- Charging: blue light flashes
- Fully charged: blue light stays on
How to charge the charging case?
- Use a Type-C adapter to charge the case (current no more than 1A).
- Please charge the earbuds and charging case at least once per 3 months when not in use for a long time.
Why are the earbuds still connecting to my phone after placing them back and closing the case lid?
- The charging case has no remaining power. Placing the earbuds back into the charging case can’t turn them off if the case battery is dead.
- Please make sure the earbuds are correctly placed in the charging case, and make sure the charging contactors are clean. Please try to clean the places between the charging case and the earbuds with something like a microfiber cloth.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference for radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by furning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC ID
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device”
RF Warning Statement
The device has been evaluated lo meal general RF exposure requirement. The device con be used In portable exposure condition without restriction.
FAQ
BLUETOOTH
How to pair SoundPEATS Free2 classic?
- Open the charging case lid, and take both earbuds. Two earbuds will turn on and enter paring mode.
- When the earbuds pair successfully, the red and white lights on the main earbud will flash alternately, the white light on the secondary earbud will stay on. Now you can connect the earbuds to your device.
- Activate Bluetooth on your device and choose “Free2 classic” to connect.
How to reset SoundPEATS Free2 classic?
Try the following steps if you fail building connection between two earbuds, or between earbuds and device:
- Open the case lid, make sure both earbuds are charging(the red lights on earbuds stay on).
- Press and hold the MFBs on both earbuds for 10s until the red and white lights flash twice alternately, reset complete.
Why is the Bluetooth connection unstable sometimes?
| Reasons| Workarounds
---|---|---
Case 1| When using the earbuds close to personal computers, Wi-Fi routers,
microwave ovens, refrigerators, etc. Refrigerators, microwave ovens, Wi-Fi
routers, personal computers, etc. are devices that emit radio waves.
The earbuds may be affected by these radio waves when using them in a location
with a mixture of multiple radio
waves.| Please use the earbuds away from Wi-Fi routers, personal computers,
microwave ovens, refrigerators, etc. in order to avoid radio wave
interference.
Case 2| When using the Bluetooth device in the pocket of the chest or
pants, or a bag while listening to the audio. If the engine ear is diagonal to
the Bluetooth device, it will affect the Bluetooth signal. As human body is
the biggest source of signal blocking.| When put the Bluetooth device in a
pocket or bag, move the Bluetooth device to a place where there are no
obstacles between Bluetooth device and earbuds (such as the human body) for
Bluetooth communication.
Case 3| When using the earbuds closes to the other Bluetooth devices.
The earbuds may be affected by these radio waves when using them in a location
with a mixture of multiple radio waves.| Turn off the Bluetooth function of
the other Bluetooth devices.
Case 4| When using the device away from the earbuds, such as in a different
room.
Bluetooth communication gradually becomes weaker the further away Bluetooth
earbuds are placed from a Bluetooth player. When using Bluetooth earbuds and a
Bluetooth player in different rooms with the doors closed, Bluetooth
communication may be weak.| Keep the Bluetooth earbuds as close to the
Bluetooth player as possible.
Case 5| When a lot of applications are running at the same time when use
the Bluetooth function.| Quit apps which you are not using on the device to
reduce the load.
What can I do if the earbuds stopped connecting to my device?
- Clear the pairing record between the earbuds and all of the previous devices.
- Try to clear some Bluetooth listings on your device and restart the device.
- Put the earbuds into the charging case to reset.
- Take the earbuds out of the charging case and leave some time for them to pair with each other. Then please open the Bluetooth of your device to connect.
What can I do if the left earbud and the right earbud won’t work together?
- Please use a bit of light sandpaper or microfiber cloth with a bit of rubbing alcohol to clean the charging connectors to ensure the earbuds charge well.
- Put them into the charging case to reset.
What can I do if the earbuds connect to my phone, but not my Mac- book/computer?
- UNPAIR the earbuds from the phone, then the earbuds will lose Bluetooth connection to the phone and enter into pairing mode.
- Put the earbuds into the charging case to reset.
- Take them out of the case, then open the Bluetooth of your Mac-book/computer to connect.
- If those do not help, you may need to update your computer’s Bluetooth driver. There is no driver for the earbuds. Bluetooth driver must come from the specific manufacturer for your exact computer model. Download and install the appropriate Bluetooth driver from the computer vendor’s website, then restart
- your system before attempting to pair and connect to your SoundPEATS earbuds.
SOUND
Why does the volume of the earbuds reduce after using a period of time?
It may be caused by the sound hole being blocked by foreign objects. Please try to gently clean off the screen with a little alcohol to avoid dust or secretions blocking.
What can I do if one earbud is quieter than the the other?
- Please try to gently clean off the screen with a little alcohol to avoid dust or secretions blocking.
- Please change other songs or videos. For some songs and videos, the sound effect is unstable.
- Please change other devices. You can try this way:
- UNPAIR and delete from your original device
- Pair to a new device and play music
- UNPAIR and delete from this new device
- Pair back with original device3
- Try to reset the earbuds.
Why the other side could not hear me when calling?
- Please choose to pick up phone calls via the earbuds.
- Please do not mute the phone calls.
- Please clean the mic holes to avoid dust or secretions blocking.
- Please kindly adjust the volume through the earbuds and devices.
- If you are using the earbuds with an Android phone, please check the settings to see if you have allowed both phone audio and media audio to be transmitted through the earbuds.
- Please change other devices to have a try.
CHARGING
What does the charging LED tell while charging the case?
When charging the case, the indicator light shows:
- Charging: blue light flashes
- Fully charged: blue lights stay on.
How to charge the charging case?
- Use a Type-C adapter to charge the case(current no more than 1A)
- Please charge the earbuds and charging cases at least once per 3 months when not in use for a long time.
What should I do if the charging case won’t charge?
Please try to use another known working charging cable to charge the charging case for more than 10 hours through your computer. Compared to other electronics, the headphones are low power products. Hence for charging safety, please do not use fast charger.
What can I do if any earbud stopped charging?
It is possible that your battery is completely empty, and it needs a bit of time to activate itself. There might not be any sign of activity during the first minutes of charging. First, confirm if your symptom is resolved after charging your device for more than 5 minutes. If the LED indicator on the earbud stays off, please use some microfiber cloth with a bit of rubbing alcohol to clean the charging connectors and try to adjust the earbuds to ensure the led light is on, then make sure to try and fully charge the earbud. This may take several hours. Warm tip: Please be careful not to press the earbud too hard in the charging case, so as not to damage the copper pillars in the charging case.
Why are the earbuds still connecting to my phone after placing them back and close the case lid?
- The charging case has no remaining power. Placing the earbuds back into the charging case can’t turn them off if the case battery is dead.
- Please make sure the earbuds are correctly placed in the charging case, and make sure the charging contacts are clean. Please try to clean the places between the charging case and the earbuds with something like a microfiber cloth.
TOUCH CONTROL
What can I do if the touch controls do not work always?
- Please touch the middle of the control zone. And when your hand is wet, the touch control may not work, please keep your hand dry.
- Please try to skip the songs more times, you will find the best frequency to control the earbuds. When you don’t find the frequency you may think the earbuds don’t work, please give it some patience.
- Another way for you to have a try: discharge the earbuds, then charge and reset.
CUSTOMER SERVICE TEAM
What should I do if the problem about the earbuds is not mentioned in this FAQ?
If there is no solution for your problem in this FAQ, please feel free to contact our Customer Service Team and we will provide you a solution as soon as possible. If we confirm that the problem couldn’t be solved, we will apply the replacement or refund for you. SoundPEATS provides an 12-month warranty for every product. Your satisfaction is always greatly important to us.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>