Sanico CELINA XDDL26WW Plafon LED Instruction Manual
- June 4, 2024
- Sanico
Table of Contents
CELINA XDDL26WW Plafon LED
Instruction Manual
|
---|---
|
INTENDED USE/APPLICATION
Product designed for use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting.
Mounting should be performed by an appropriately qualified person. Any
activities to be done with disconnected power supply.
Exercises particular caution.
The product has a protective contact/terminal. Failure to connect the
protective lead may lead to electric shock. Mounting diagram: see pictures.
Check for proper mechanical fastening and connection to electrical power prior
to first use. The product can be connected to a supply network that meets
energy quality standards as prescribed by law.
FUNCTIONAL CHARACTERISTICS
Product for indoor use. Energy-efficient light sources can be used in this product. The product automatically lights up when moving objects are detected (applies to selected models).
USAGE GUIDELINES/MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and
the product has cooled down. Clean only with soft and dry cloths. Do not use
chemical detergents. Do not cover the product. Ensure free air access. The
product may heat up to a higher temperature. Product with a non-replaceable
light source of the LED type. The product cannot be fixed if the light source
becomes damaged.
ATTENTION! Do not look directly at the LED light beam. The product can only be
supplied by rated voltage or voltage within the range provided.
It’s forbidden to use the product with a damaged protective cover.
The product must not be used in unfavorable conditions, e.g. dust, water,
moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.
Moving objects (e.g. vehicles) may cause random activation of the sensor. In
the area of strong electromagnetic interference, the functioning of the
product may be disrupted.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended.
- This labeling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labeled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health and require a special form of recycling/neutralizing.
Products labeled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centers is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when a new product is purchased, in quantity no larger than the purchased item of the same type.
The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
COMMENTS/GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury, and other material and non-material damage.