Sanico RODOS 33 LED Solar Lamp Instruction Manual
- June 5, 2024
- Sanico
Table of Contents
Sanico RODOS 33 LED Solar Lamp
Instruction
INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. Product requires preparation before operating.
FUNCTIONAL CHARACTERISTICS
The lamp is equipped with built-in solar panels. Fixtures turns on automatically after dark.
USAGE GUIDELINES / MAINTENANCE
Clean only with soft and dry cloths. Do not use chemical detergents. Do not
cover the product. Ensure free air access. Battery replacement: see pictures.
The product must not be used in unfavorable environments, e.g. dust, moisture,
water, vibrations, etc. Product with a nonreplaceable light source of the LED
type. The product cannot be fixed if the light source becomes damaged. It’s
forbidden to use the product with damaged protective cover.
ATTENTION! Do not look directly at LED light beam. Product to be used in
a moderate climate. Using the product without the shield is forbidden. Non-
demountable product. Not suitable for independent repairs. The construction of
the product offers no resistance to specific conditions, e.g. due to the
presence of defrosting substances and salt atmosphere; oils, lubricants,
solvents. Prevent flooding of the device. In case of failure, the device
should be replaced with a new one. Before first use, the solar lamp must be
exposed to direct sunlight for a few days in order to charge the accumulators.
Make sure that the solar panel is not covered/shaded/overshadowed while
installing the lamp outside in order to ensure the optimal charging of the
accumulators. Keep the solar panel and the chassis of the device clean in
order to ensure the optimal charging of the accumulators during the day. Clean
regularly If after some time the lamp stops working, try changing the
accumulators. Use protective gloves.
ENVIRONMENTAL PROTECTION
Segregation of post-packaging waste is recommended. This labeling indicates the requirement to selectively collect waste electronic and electrical equipment. Products Labeled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralizing. Keep your environment clean. Used batteries and/or accumulators need to be treated as separate waste and placed in an individual container. Used batteries and/or accumulators should be returned to a collection facility for waste batteries/ accumulators. Information on collection centers is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>