DURACELL DRLJS180B 1100 Amp Li-Ion Jump Starter Instructions
- June 5, 2024
- Duracell
Table of Contents
DURACELL DRLJS180B 1100 Amp Li-Ion Jump Starter
IMPORTANT: SAVE THESE INSTRUCTIONS
Misusing or incorrectly connecting the DURACELL® Jump-Starter may damage the
equipment or create hazardous conditions for users.
Product details
- The Jump-start port connects to jump-start clamps.
- USB port (2.4 Amps) charges smartphones, tablets and other devices.
- Charging ‘IN’ port connects to USB cable to recharge the Jump-starter.
- LED flashlight features high beam, low beam and emergency/SOS mode.
- Battery level button and LED gauge displays battery charge level.
- LED status light bar indicates state of the Jump-Starter connection (see Section 7).
- Light button activates the LED flashlight.
- Bluetooth button Hold 3 seconds for pairing mode (requires Duracell Power App).
- Jump-start clamps with the SafeJump™ feature.
- Carry bag fits into most vehicle glove boxes.
- DC charger and USB cable for recharging the Jump-Starter.
Charging the Jump-starter
WARNING: SHOCK HAZARD
Disconnect jump-start clamps before charging the Jump-starter.
CAUTION
Do not attempt to recharge the Jump-starter battery if it is frozen. Gradually
warm the frozen battery to 32 °F (0 °C) before recharging.
IMPORTANT: FULLY CHARGE BEFORE USE
Prior to using the Jump-starter for the first time, ensure that the battery of
the Jump-starter is fully charged. If the battery has been fully discharged,
charging with a USB charger may take up to 5 hours.
IMPORTANT: PROPER CHARGER OUTPUT
For fastest possible recharging time, please be sure to use an AC or DC
charger with a rating of 2.0 Amps or higher. The charge times shown assume the
usage of a charger with a 2.0A or higher power rating.
CAUTION
The included DC charger is for charging only Li-Ion type rechargeable
batteries. Other types of batteries may burst causing personal injury or
damage.
Charging/re-charging the Jump-Starter
Charging times: Partially discharged (or after using jump-starter) -30-60
minutes; fully discharged jump-starter battery – up to 5 hours
Charging with the included DC charger:
- Disconnect any cables from the Jump-starter and USB ports.
- Plug the DC charger into the included 12V vehicle socket (Fig. AJ and connect the small micro USB end of the included USB charging cable to the ‘IN’ port. (Fig. BJ
- It is best to have the vehicle running while charging.
Charging with an AC charger (sold separately):
- Disconnect any cables from the Jump-starter and USB ports.
- Plug the USB cable into your USB wall charger (Fig. C – wall charger sold separately) and connect the small micro USB end of the included USB charging cable to the ‘IN’ port (Fig. BJ.
IMPORTANT
If you keep the Jump-starter in storage, the battery will discharge over time.
Remember to recharge the battery after every use to make sure it is ready when
you need it, and at least once a year. Re-charging more often will not harm
the Jump-starter.
Checking the Jump-starter’s battery level
To check the battery’s charge level, press the battery level button on the
JumpStarter. The LED fuel gauge will illuminate and display the current level
of available battery power. Four lights indicate a 100% charge.
IMPORTANT
Your Jump-starter will perform best when its battery is fully charged. If the
LED Fuel Gauge shows less than 100% charge, it is recommended to fully
recharge its battery (see Section “Charging the Jump-starter”).
Using the LED flashlight and USB port
Using the LED light
The DURACELL® Jump-Starter has a built-in emergency light to provide a safe,
bright work light on the roadside and in other outdoor environments.
Press and release the light button to cycle through the 3 light modes. (High
beam, Low Beam and SOS)
Using the USB port
The USB port provides up to 2.4 Amps of current to charge cell phones,
smartphones, tablets and other devices.
- Open the protective cover over the USB port.
- Connect your USB device (smartphone, tablet, etc.) to the USB port using the USB cable supplied with your device.
- Charging will automatically start.
Jump-starting a vehicle
You can use the DURACELL® Jump-Starter with the supplied jump-start clamps
to jump-start a vehicle or boat engine. The Jump-Starter is compatible with
12V vehicles.
WARNING: FIRE HAZARD
Do not crank the engine for more than 4 seconds. The jump-start feature is
designed for short term operation only. Operating the jump-start feature for
more than 4 seconds may cause damage to the unit. Allow the Jump-starter to
cool down for at least 30 seconds after each jump-start.
To jump-start a vehicle engine:
- Connect the jump-start clamps to the Jump-Starter
- Connect the red(+) clamp to the positive(+) terminal on the vehicle battery and the black(-) clamp to the negative(-) terminal on the vehicle battery.
- Verify that the Jump-Starter and clamps are clear of any moving engine parts.
- Start your engine. Be sure to crank for no more than 4 seconds at a time and allow for 30 seconds in between starting attempts.
- After starting the vehicle remove the Jump-starter and recharge it.
Jump-Start LED bar function
Specifications
E lectrical specifications
Physical specifications
Important safety instructions
IMPORTANT: Please read these general usage-related warnings and cautions thoroughly before using this Jump-starter.
WARNING: When using this product, basic precautions should always be followed, including the following:
- Read all the instructions before using the product.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not insert fingers or foreign objects into the product.
- Do not use this product with any application of which it was not intended.
- Use of an attachment not recommended or sold by the manufacturer may result in risk of fire, electric shock or injury to persons.
WARNING: Medical equipment
This product is NOT tested, designed nor intended to be used with life support
systems or any other medical devices.
WARNING: Proper application
Do not use the product if it is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior resulting in fire, explosion or
risk of injury.
- Do not operate the Jump-starter with a damaged cord or plug.
- Do not disassemble the Jum-starter, contact the manufacturer when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
WARNING: Risk of explosive gases
WORKING IN THE VICINITY OF A LEAD ACID BATTERY IS DANGEROUS. BATTERIES
GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS REASON, IT
IS OF THE UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE
THE JUMP-STARTER.
To reduce risk of vehicle battery explosion, follow these instructions in
vicinity of the battery. Review cautionary marking on this product and on
vehicle engine.
WARNING: Personal precautions
- Consider having someone close enough by to come to your aid when you work near a lead-acid battery.
- Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes. Wear complete eye protection and clothing protection. Avoid touching your eyes while working near a vehicle battery.
- If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately flood eye with running cold water for at least 10 minutes and get medical attention immediately.
- NEVER smoke or allow a spark or flame in vicinity of a vehicle battery or engine.
- Be extra cautious to reduce risk of dropping a metal tool onto the vehicle battery. It might spark or short-circuit battery or other electrical part that may cause an explosion.
- Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid battery. A lead-acid battery can produce a short-circuit current high enough to weld a ring or the like to metal, causing a severe burn.
- When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way.
- Under abusive conditions, liquid may be ejected from the battery, avoid any contact with this material. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not expose a Jump-starter to fire or excessive temperature. Exposure to fire or temperature above 265° F (130°C) may cause an explosion.
- Attach output clamps to a battery and chassis as indicated in these instructions. Never allow the output clamps to touch one another.
Recycling
DURACELL® is committed to environmental responsibility and recommends that
electronic devices be disposed of properly. Please contact your local city
offices for information on recycling and disposal programs for e-waste.
For instructions on how to recycle this product visit http://www.call2recycle.org.
Contacting Customer Support
If you experience any problems or have any questions regarding your DURACELL® product, free technical support is available. Prior to calling, please review the technical support tips below. Call from a phone where you have access to your mobile device.
Be prepared to provide the following information:
- Name, address and telephone number
- Name of the DURACELL® product
- Make and model of your device
- Symptoms of the problem(s) and what led to them Technical Support is available by telephone:
U.S. and Canada to 1-800-300-1857
Outside of the US/Canada: 1-805-437-7765 Written inquires should be directed to:
DURACELL® Product Inquiry
1380 Flynn Road, Camarillo, CA 93012, USA
Email inquires should be directed to: info@DuracellPower.com
Warranty and return information
Two Year Limited Warranty
The DURACELL® product carries a limited warranty against defects in material
and workmanship under normal use and service for two years from the original
date of purchase. The manufacturer or distributor, at its option, shall repair
or replace the defective unit covered by this warranty. Please retain the
dated sales receipt as evidence of the dale of purchase as it will be required
for any warranty service. In order to keep the warranty in effect, the product
must have been handled and used as described in the instructions accompanying
this warranty. This warranty does not cover any damage due to accident,
misuse, abuse or negligence.
Disclaimer Of Warranty
The limited warranty described herein is your sole remedy. To the extent
permitted by law, the manufacturer and distributor disclaim all other implied
or express warranties including all warranties of merchantability and/or
fitness for any particular purpose.
Limitation Of Liability
Except to the extent of repairing or replacing this product as expressly
staled in the limited warranty described herein, the manufacturer and
distributor shall not be liable for any damages, whether direct, indirect,
incidental, special, consequential, exemplary, or otherwise, including lost
revenues, lost profits, loss of use of software, loss or recovery of data,
rental of replacement equipment, downtime, damage to property, and third-party
claims, arising out of any theory of recovery, including statutory, contract
or tort. Notwithstanding the term of any limited or implied warranty, or in
the event that any limited warranty fails of its essential purpose, in no
event will the manufacturer’s and distributors’ entire liability exceed the
purchase price of this product. Some states and provinces do not allow the
exclusion or limitation of incidental or consequential damages so the above
limitations or exclusions may not apply to you. This limited warranty gives
you specific legal rights. You may have other rights which vary from state to
state and province to province.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation of this product
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced technician for help.
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.
Canada IC Statement
This equipment complies with Industry Canada radiation exposure limits set
forth for an uncontrolled environment.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference that may cause undesired operation of the device.
Additional Language Manuals Manuels dans d’autres langues Manuales en idiomas adicionales
- Spanish and French language user manuals are available at duracellpower.com.
- Los manuales de usuario en espaiiol estan disponibles en duracellpower.com.
- Les manuels d’ulilisation en francais son! disponibles sur duracellpower.com.
Product Registration
For complete warranty coverage, please register your Duracell product within
fourteen days of purchase.
Visit DuracellPower.com/Register
or scan the QR code below to register.
Duracell is a registered trademark of Duracell US Operations, Inc., used under license. All rights reserved.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,lnc. and any use of such marks by Battery-Biz Inc. is under license. other trademarks and trade names are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>