Qsee 4MP Poe IP Camera User Guide
- June 15, 2024
- Qsee
Table of Contents
Qsee 4MP Poe IP Camera
What’s Included?
NOTE : After unboxing, check that the console is intact and fully equipped.
Camera Introduction
NOTE : The actual appearance and components may vary with different models of product.
Ceiling Mount Guidelines for Camera
-
Drill the screw holes in the ceiling according to the bracket.
-
Connect the corresponding power cable and video cable.
-
Fix the camera to the ceiling with the supplied screws.
-
Adjust the surveillance angle
-
Loosen No.3 with adjusting screw to adjust the panning position (0° ~ 360°).
-
Tighten No.3 with adjusting screw.
-
Loosen the No.2 with an adjusting screw to adjust the tilting position (0° ~ 90°).
-
Tighten No. 2 with adjusting screw.
-
Loosen No.1 with an adjusting screw to adjust the azimuth angle of the image (0° ~ 360).
-
Tighten No.1 with adjusting screw.
-
Drill the screw holes in the ceiling according to the case.
-
Connect the corresponding power cable and video cable.
-
Fix the camera to the ceiling with the supplied screws.
-
Adjust the surveillance angle
-
Adjust the panning position (0°~360°).
-
Adjust the tilting position (0°~90°).
Connect Cameras to NVR
Set up your device as per the quick set up guidance below
-
Connect the NVR (LAN port) to your router with an ethernet cable. Next, connect the mouse to the USB port of the NVR
-
Connect the NVR to the monitor with a VGA or HDMI cable.
NOTE : here is no VGA/H DM I cable included in the package. -
Connect the Camera to NVR with an ethernet cable.
-
Connect the NVR to a power adapter and turn on the power switch.
NOTE :-NVR is not included in the package.
**Connection Diagram
**
Do not install the camera near high voltage sources or other sources of electrical interference, otherwise the video signal may be poor.
NOTE : The above diagram is only for connection guidance, part of the accessories are not included in the box.
Specification
Camera
- Video Compression: H.264/H.265
- Resolution: 8MP/5MP/2MP
- Night Vision: 20 Meters (65.6ft)
- Day/Night Mode: Auto Switchover
- Power Supply: PoE or DC12V /2A
- Operating Temperature: -20°C ~ 50°C(-4 °F ~ 122 °F)
- Operating Humidity: 10%~90%
- Weather Resistance: IP66(Plastic);IP67(Metal)
Camera Installation Tips
- Do not point the camera towards a glass window, or it may result in poor image quality which can lead to miss some important details of what you care about.
- Do not face the camera towards any light sources.
- Do not place the camera in a shaded area and point it towards a well-lit area. Or it may result in poor image quality. To ensure best image quality, the lighting condition for both the camera and area of surveillance should be same.
- To ensure better image quality, it’s recommended to clean the lens with a soft cloth from time to time.
- Make sure the power ports are not directly exposed to water or moisture and not blocked by dirt or other elements.
- With IP waterproof ratings, the camera can work properly under conditions like rain and snow. (it can’t use for underwater surveillance).
- Do not install the camera at places where rain and snow hit the lens directly.
- High mounting positions work best since they keep the security camera out of reach of intruders, curious children, or inquisitive pets.
If you encounter any troubles in product information, product installation and use, please email us at support@q-see.com or refer us to our website www.q-see.com
Give us your feedback
Qsee strives for a high-quality product and user experience, we’re eager to
hear your feedback or suggestions. Send your feedback through the Qsee App,
email at support@q-see.com, or share a post by tagging Qsee on the social
media platform
FACEBOOK : @Q-See, INSTAGRAM : @qseesecuritysystems.
Notification of Compliance
FCC Statement
This device complies with Part 15 of FCC rules. Operation is subject to the condition that this device may not cause harmful interference.
NOTE :- This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CE Declaration
Qsee declares that this device in compliance with essential requirements and
other relevant provisions of EMC directive 2014/30/EU.
RoHS CompUance declaration
Qsee products delivered to our customers confirm to the RoHS requirements, in
which six banned substances are not detected or are under the limitation. The
Restriction of Hazardous Substances Directive (EU) 2015/863 and (EU)2017 /2102
amending Annex II to Directive 2011/65/EU. This declaration is based on Qsee’s
understanding of the RoHS directive and knowledge of the materials that go
into products.
Warranty
This product comes with a 2-year warranty, under certain conditions. Learn more: www.q-see.com/policies/refund-policy
NOTE :- If you are not satisfied with the new Qsee product purchase, we suggest you to reset the camera and return it under specific conditions.
Terms and Privacy
Use of the product is subject to your agreement to the terms of service and
privacy policy at www.q-see.com. Keep out of reach of children.
End User License Agreement
By using the product software that is embedded in the Qsee product, you agree
to the terms of this end user license agreement between you and Qsee. Learn
more: www.q-see.com/policies/terms-of-service
Technical Support
If you need any techinical help, please visit our official support site and
contact our support team before returning the products.
Email : support@q-see.com
Web : www.q-see.com
FAQ’s
What NVR does the camera support?
The default output signal of the Qsee PoE IP camera is H.265 5MP@25ps/8MP@15fps, supporting video and audio recording. Due to most functions depending on private protocol, this camera only works with Qsee NVR, like QP08081N R, QP16081N R.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>