DASAN TMS3.0 Vehicle Control Terminal Instruction Manual

DASAN TMS3.0 Vehicle Control Terminal

Revision history of document

V2.0

| ****

2019-07-01

| 2nd release

–     Type A removed LTE Connector

V3.0

| ****

2020-09-14

| 3rd release

–       Add FCC/CE/IC requirement

–       Iridium/GPS/WiFi Connector changed

–       LED Specification changed

V3.1

| ****

2020-09-16

| 4th release

–     Changed PMN

Precautions In Product Handling

Read carefully the following contents before handling this product and use this product correctly according to guidelines. And after understanding precautions well, keep this manual well and let manager or user use this manual before and after installing product or before handling product. If the person in charge is changed, be sure to hand over this manual to the successor and let he/she use product correctly.

CAUTION AND WARNING

Installation Qualifying Condition
Only the person who is qualified for handling designated installation equipment or only skilled technician can install this product.

Prohibition Of Product Disassembly
Disassembly of this product can cause loss of life and property by electric shock, breakdown, malfunction, static electricity, etc. Do not disassemble, repair, remodel this product recklessly. If repair is needed, call Helpdesk (+82-1588-7080).

Strict Observance Of Operation Condition
This product normally operates in the condition described in product specification. However, if the product keeps operating in condition that it is close to the minimum or maximum value, a probability of loss of life and property increases. Therefore, be sure to predict/check environ-mental change that each condition range may not approach the minimum or maximum value, and manage that the equipment may operate in median value of operation condition range.

Maintaining Cleanliness Of Installation Place
Be sure to tidy up product installation place before and after installation, and do not leave working tools or components alone on the moving path to prevent accident.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-sonable protection against harmful interference in a residential installation. This equip-ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com-munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-tion, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for com-pliance could void the user’s authority to operate the equipment.
The antenna should be installed and operated with minimum distance of 20 cm between the radiator and your body.

IC Compliance
This device contains licence-exempt transmitter(s)/receiver that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is sub-ject to the following two conditions:(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The antenna should be installed and operated with minimum distance of 20 cm between the radiator and your body.

System Overview

Enables real time monitoring of equipment operating information and state information in a remote place through mobile communication or satellite communication, and, through the real time monitoring, user, dealer, customer can raise efficiency of equipment management.

Product Interface & Specification

This page describes product interface and specification.

Classification By Product

100BASE-T1

(BroadR-Reach)

|  |  | ****

O

| ****

O

TMS3.0 Classification By Product

Product Specification

• Interface

INTERFACE

| 1 x Mandatary Connector|
---|---|---
1 x Secondary Connector|
1 x Satellite Antenna Connector| Type-B, D
1 x GPS Antenna Connector|
2 x Wi-Fi/BT Antenna Connector| Type-C, D

• LED Indicator

LEDs| Type A : Power, LTE,  GPS Type B : Power, LTE, SAT, GPS

Type C : Power, LTE, GPS, WiFI, Ethernet 1,2

Type D : Power, LTE, SAT, GPS, WiFi, Ethernet 1,2

| 7 LEDs
---|---|---

• Power

DC Input Voltage| 12/24VDC|
---|---|---

Consumption Power

| Max 10.18W

(based on 24V, Battery Charging, product D type)

|
Internal Battery| TLI-1550 Cell X 3 (TADIRAN)|

• Physical Specification

Size (H x W x D)| 174 x 122 x 52.4mm|
---|---|---
Operation Temperature| -30 ~ +75℃|
Operation Humidity| 10 ~ 95% RH|
Storage Temperature| -40 ~ +85℃|

Product Interface

4

| ****

Mandatary Connector

| Power Alternator Key On CAN

Security Serial RX/TX

Cold Reset

| ****

DT13-12PA

5

| ****

Secondary Connector

| CAN

Solenoid Digital Input

100BASE-T1 x 2

Serial RX/TX

| ****

DTM13-12PA

Product Antenna Specification

Iridium/GPS

| ****

HIRD-SG-0147A-01

| Iridium : TNC-Male (Standard)

GPS : SMA-Male

| ****

3320

Wi-Fi/BT

| WLAN 2458

LP/S/SMA/0.15 MIMO 2

| ****

SMA-Male

| ****

3320

LED Specification

Power (Key on)

| Green| Blinking| 1000ms| Key On
Green| Lighting|  | Engine On

Yellow

| ****

Lighting

|  | Internal Battery Charge

& Under 50% Capacity

Yellow| Blinking| 500ms| Undefined Model
 | Red| Lighting|  | Harness Failure
---|---|---|---|---
Red| Blinking| 500ms| Fault Code

Power (Key off)

| Yellow| Blinking| 1,000ms| Mbat Sleep (Sleep Vbat Event)
Yellow| Blinking| 1,000ms| Deep mode (Sleep Deep Event)
Yellow| Blinking| 1,000ms| Wake up (in Mbat Sleep status)

LTE

| Red| Blinking| 500ms| LTE Module / USIM Fault
Yellow| Lighting|  | Unregistered (Roaming Failed)
Yellow| Blinking| 1,000ms| Registering
Green| Lighting|  | Normal – Standby
Green| Lighting| 500ms| Data Sending / Receiving

SAT

| Green| Lighting|  | Satellite in View
Yellow| Lighting|  | No Satellite in View
Green| Blinking| 500ms| Data Sending / Receiving
Red| Lighting|  | Antenna Disconnected (Short/Open)
Red| Blinking| 500ms| SAT Module Fault

GNSS

| Yellow| Lighting|  | GPS Satellite is not sensed.
Green| Lighting|  | Normal
Red| Lighting|  | Antennal Non-Connection
Red| Blinking| 500ms| GNSS Module Fault

Wi-Fi

| Yellow| Lighting|  | Wi-Fi is not sensed.
Green| Lighting|  | Normal
Red| Lighting|  | Antennal Non-Connection
Red| Blinking| 500ms| WiFi Module Fault
Eth Port

1

| Green| Lighting|  | Link Connection
Green| Blinking|  | Data Transmission & Reception
Eth Port

2

| Green| Lighting|  | Link Connection
Green| Blinking|  | Data Transmission & Reception

Installation Preparation

Installation Method

• Blue Colored Location: Screw Hole Installation
•  Mounting Height: Under 2m
•  Screw Specification
  • PN: S0504653 (M6X1.0X16)
  • Surface treatment: Black
  • Strength: 8.8
  • Material: SM45C/SM50C  ****

Documents / Resources

| DASAN TMS3.0 Vehicle Control Terminal [pdf] Instruction Manual
TMS30DUALTYPEB, 2AXDMTMS30DUALTYPEB, TMS3.0 Vehicle Control Terminal, Vehicle Control Terminal, Control Terminal
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>