Smartrol 21F0FEDB84A584F Wi-Fi Welcome Doorbell User Guide

Smartrol 21F0FEDB84A584F Wi-Fi Welcome Doorbell

WELCOME

• This product is an entrance greeting doorbell with 30 melodies, 3 volume levels, and a light ring. It will say HELLO to visitors as they walk passing by it.
• It is connected to internet via a Wi-Fi 802.11 b/g/n(2.4GHz). It is controlled via a mobile application from any point of the world.
• It is also an alarm hub that can be connected wireless siren and up to 30 wireless sensors with an effective communication range of up to 80 meters without obstacles. In the event of alarm activation, for example, when a sensor is triggered, the hub internal siren sounds at 80dB on-site, an optional wireless siren sounds at 100dB, and a push notification will be sent immediately.
• The system can be set in multiple work modes through APP from anywhere with our free dedicated mobile application. In-app, you can get the real-time total visitors today.
• If the building has lost electrical power, the backup battery built in the doorbell provides power operation for up to 5 hours.

SPECIFICATIONS

• Power Supply: Micro USB+5VDC/1000mA
• Backup Battery: 3.7V, 300mAh Lithium-ion Battery Consumption: <100mA@normal
• Motion Distance: ≤5meters
• Motion Range: horizontal direction 100° and vertical direction 30°
• Radio Frequency: 433Mhz
• Wi-Fi: IEEE802.11b/g/n
• Selectable Melodies: 30
• Volume Levels: 4(includes mute)
• Sound Level(typical): 85dBA
• Expandable: wireless siren and up to 30 wireless sensors Operating Temperature: -10~55℃
• Expandable

IN THE BOX

• Motion Doorbell / Alarm Hub x1
• Mounting Screws x2 / Double-sides Adhesive Tap
• User Guide x1
• Power Adapter
• USB Cable
• Optional.
• Door Sensor
• Motion Sensor
• Wireless Siren
• Wireless Keypad

AT A GLANCE

1. Light ring
2. Motion detector lens
3. Volume / Power button
4. Wi-Fi Configuration / Work Mode button
5. Music down button
6. Power port
7. Adjustable holder

Light Ring

Blinking blue

| Wi-Fi connection configuration in Smart / EZ Mode
Blinking green| Wi-Fi connection configuration in AP Mode
Blinking purple| Pairing/sniffer mode

DO THIS FIRST

Scan the QR code or find “Smart Life” from GooglePlay/APP Store to get the free application for Android or iOS. Upon installation of the APP on your phone, the app will guide you through registering.

CONNECT TO WIFI

With EZ Mode (Default).

• STEP 1. Power your doorbell, then press and hold the Wi-Fi configuration button until the light blinks blue quickly (0.1s on and 0.1s off), then it is ready to be connected.
• STEP 2. On App, the home page, tap the “+” icon, select Sensors from Add Manually, then select Alarm(Wi-Fi) from the devices list.
• STEP 3. Choose your local 2.4GHz Wi-Fi (NOT 5GHz) and input the password, then choose EZ Mode (default) in the top right corner, then follow on-screen instructions in the app to complete the connection.
• IMPORTANT: Please turn to AP Mode to connect again if the connection fails in EZ Mode. Or with AP Mode.
• STEP 1. On your doorbell, one more time, press and hold the Wi-Fi configuration button until the light blinks green slowly (1s on and 1s off), then it is ready to be connected.
• STEP 2. Do the same step 2 in EZ mode, then in the top right corner, choose AP Mode, then follow on-screen instructions in the app to complete the connection.

Home Page

You are ready to go.

INSTALLATION

Install the doorbell on the ceiling or sidewall of the entrance where visitors and intruders go back and forth. Installation by screws will be more firm than a double-sided tap which requires a tidy and smooth surface. Upon installation, the motion-sensing curtain should be parallel to the entrance door.

Note The doorbell is used indoors only, do not keep it exposed to the sun and rain. Had better not install it in the areas of the air-conditional, fan which changes the environment temperature.
Choose an unswitched wall outlet and plug the power adapter into the outlet to power on your doorbell.

Sensor Range

• Side view
• Top view

Installation on the ceiling

Installation on the sidewall

HOW TO ADD/PAIR WIRELESS SENSORS

The wireless sensors supplied with this kit are paired with a doorbell(hub). IF NOT or you want to pair more, you might easily pair wireless accessories with your hub as follows.

• On your device home page in APP tap Accessories > +, then the hub goes into the pairing/sniffer mode with a light ring blinking purple.
• Trigger your wireless accessory that needs to be added to send a transmission signal to the hub, then the hub sounds a tone.
• After the accessory is added, each of them will be classified to each corresponding column automatically in APP.
• When you are ready to pair a door sensor, start with the door sensor and magnet closely aligned, then separate until the blue light comes on. (Don’t active tamper switch)

HOW TO CONNECT WIRELESS SIREN

• STEP 1. Press and hold the SET button of the siren until you hear one beep, then the siren goes into the sniffer mode and the light is on.
• STEP 2. In APP tap the Panic button to activate a hub alarm to send a transmission signal to the siren.
• STEP 3. The siren gives a long beep of successful indication.
• In case of an alarm, the siren sounds at 100dB.

GREETING MODE

How to set doorbell to greeting mode. In APP tap the Greeting button, or click the Wi-Fi button on the doorbell until the light ring switches to cyan.

In greeting mode, the doorbell will say Hello as somebody passes by it.

SMART GREETING MODE

How to set doorbell to smart greeting mode.

• In APP tap the Smart Greeting button, or click the Wi-Fi button on the doorbell until the light ring switches to green.
• In smart greeting mode, the doorbell just says Hello once as somebody passes by it all the time.

CHANGE DOORBELL TONE

• By APP. Go to Settings>Greeting melody to choose the doorbell tune you want.
• Or By Hub. STEP 1. Click the Music Down button to choose the tune you want.
• STEP 2. Press and hold the Music Down button until you hear a tick.

ADJUST VOLUME By APP

• Go to Settings>Volume level to select the level you want.
• Or By Hub. Click the Volume button to adjust the volume level from high to mute, then skip to high.

TOTAL VISITORS

About.

• Once a visitor enter and exits, the number of total visitors increases by one.

• In APP you can get the real-time total visitors today in the top left corner.

• Total visitors are just for reference.

• How to Enable/Disable

• Total Visitors Notification.

• STEP 1. In APP go to

• Settings>Daily time for total visitors notification to set the push time every day.

• STEP 2. Go to Settings>Total visitors notification to turn the notification on or off.

• Once You Enable

• Total Visitors Notification.

•  The doorbell will push you, total visitors, within 24 hours yesterday notification automatically at a daily time you set in APP.

• Also, send a notification when you set hub work mode.

• In APP home page, go to Me>Message Center to view all notifications.

SECURITY MODES

Place your doorbell in Home mode to disarm your interior sensors, while keeping your exterior sensors armed. Set to Away mode to arm all the sensors in your home to know what happens while you’re out. And Disarm your system to disarm all sensors and freely walk in and out of your home.

• No Rush.
  With No Rush, you can take the time you leave home or disarm before the alarm sounds. By default, you have 40 seconds. To adjust the countdown timing in APP, tap Settings > Exit Delay and Entry Delay to change the delay you want.

• Using APP

• to away arm.

• to home/partial arm.

• to disarm.

• to trigger an emergency alarm.

• Tips

• When you arm the system, the hub will sound an alarm if you leave the door or window open.

• The motion sensor of the doorbell is worked in monitored mode while the hub is armed. An alarm will go off when the intruder is detected.

SCHEDULED GREETING/ARMING MODE

You can set multiple schedules for switching your hub in Greeting or Arming mode automatically at a daily time.

For Example.

If you want the hub enters Greeting Mode at 8:00 every morning and switch to Arm Mode at 21:30 every night, add two schedules as follows.

• STEP 1. In APP go to
• Settings>Scheduled arm/to disarm to add a schedule with an 8:00 time panel, repeat days during a week, and Greeting mode.
• STEP 2. Go to Settings>Scheduled arm/disarm to add a schedule with a 21:30 time panel, repeat days during a week, and Away Arm mode.

SENSOR/ZONE RESPONSE TYPE DEFINITIONS

Sensors Pages

Each of the sensors is specified a Zone mode, which defines the way in which the system responds to faults in that zone. Tap Accessories and pick the sensor you want to set, then change Zone Mode from the list described as followings. Normal. Sensors set to Normal Zone are activated in Arm (full arm) or HOME Mode (home/stay/partial arm). We recommend setting the door/window sensor to Normal Zone. 24 Hours. Sensors set to 24H Zone will activate the alarm and sounding when triggered, regardless of the alarm status (Armed or Disarmed). Delay. If sensors set to Delay Zone are triggered, the Hub will sound the alarm after the delay time passed. We recommend setting door sensors with a delay if they are used as primary entryways. Home. Sensors set to Home Zone are only activated in the Arm (full arm). If Stay Arm Mode (partial/home arm) is used, these sensors are not armed and will not activate the alarm is triggered. We recommend setting PIR Motion Detectors to Home Zone. 24 Hours Silent. The mode is the same as 24 Hours but no sound. Home with delay. It is the same as Home but with Entry Delay in the Arm. To disable the sensor, select Off. Greeting. Greeting only in Greeting Mode. Greeting+Normal Alarm. Greeting in Greeting Mode and same as Normal in Arm Mode. Greeting+Delay Alarm. Greeting in Greeting Mode and same as Delay in Arm Mode. Note: In the sensors list, you can’t delete the doorbell motion sensor( Default PIR ) and can’t change its Type (Motion PIR).

CHANGE SETTINGS

Settings Pages

Available Settings in Arm Mode

Exit delay & Entry delay

Your security system has been programmed with delay times that allow you to exit your home after arming and to disarm the system upon entry before an alarm occurs. If you leave home too late when exiting, or disarm too late when arriving home, it will cause a false alarm. If an false alarm occurs, you should disarm the system immediately.

• Alarm sound
• Turn the alarm sound on or off when an alarm occurs.
• Alarm duration
• Adjust alarm sound duration from 1 to 59 minutes.
• Door/window unclosed notification
• Enable to receive a notification while you leave the door or window opened with arming.
• Countdown with tick tone
• Turn countdown tick tone on or off while the hub is during Exit Delay or Entry Delay.
• Available Settings in Greeting Mode
• Total visitors notification
• Turn total visitors notification on or off.
• Greeting melody
• Choose the greeting melody from the list.
• Volume level
• Adjust the volume level.
• Daily time for total visitors notification
• Set a daily time to send notifications for total visitors of the last day.
• System Settings
• Scheduled arm/disarm
• Add the schedule for switching your hub to the work mode you want at a daily time.
• Status indicators
• Turn the light ring on or off while the hub works in different modes.
• Door open/close notification
• Enable to receive a notification when you open and close the door or window (installed door sensor ).
• Sensor low battery alarm
• Enable to receive a notification when the wireless accessory is low battery.
• Notification on/off
• Turn all notification switches on or off.
• Factory reset
• Reset your hub to factory settings and removes all pairings.
• Hub language
• Choose the notification language.

POWER DOWN

While your hub is powered by a built-in backup battery, press and hold the Volume/Power Button until the light ring changes to white and you hear four ticks from strong to weak.  Press any button for 1 second to turn the hub on.

RESET

This process resets your hub to factory settings and removes all pairings. Tap Settings > Factory reset in APP, or press and hold Music Button until the light ring changes from blink purple to solid purple and you hear one tick, then the hub restarts.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>