kanto SWS200 Wall Mount Security iPad Stand User Manual

Kanto SWS200 Wall Mount Security iPad Stand

Thank you for choosing Kanto

Read these instructions fully before assembly and installation. If you do not understand these directions or have any doubts about the safety of the installation, please consult a qualified installation contractor. Make sure there are no defective or missing parts. Do not use defective parts. Kanto cannot be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product. If there is hardware missing, or if you are uncertain whether a part is defective, please contact Kanto directly using one of the methods below.
CAUTION: This desktop security tablet stand is intended for use with only the 10.2” iPad. Use with products other than the tablet indicated may result in instability due to incorrect fit.

Supplied Parts and Hardware

Project Overview

1. Mount Wall Plate Assembly
2. Install Case
3. Manage Cables
4. Install iPad
5. Finalize Adjustments

IMPORTANT!: Please read this entire document before attempting assembly.
If you have any problems or difficulties while following these instructions, please contact Kanto directly:
Email: support@kantoliving.com
Toll Free: US & Canada: 1-888-848-2643

Mount Wall Plate Assembly (Wood Stud Wall)

Mount height depends on iPad size, viewing position, and personal preference.

WARNING: Do not use concrete anchors in drywall or wood surfaces.

Mount Wall Plate Assembly (Concrete Wall)

Mount height depends on iPad size, viewing position, and personal preference.
WARNING: Do not use concrete anchors in drywall or wood stud walls.

CAUTION :
Make sure the concrete or brick wall is at least 4” thick. Make sure the anchor is seated completely flush with the concrete surface even if there is another layer of material, such as drywall. If drywall is over 5/8” thick, custom lag bolts must be used. Concrete must be a minimum of 2000 psi in density.

Install Case

Manage Cables

Install iPad

Finalize Adjustments

Limited Warranty to Original Purchaser

Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free from defects in material for the limited warranty period of 5 years. If equipment fails because of such defects and Kanto is notified within 5 years from the date of shipment with proof of original invoice from an authorized reseller, Kanto will, at its option, provide replacement parts or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Any replacement parts or replacement units are warranted for 90 days from the day of reshipment to the original purchaser. Customers will be responsible for obtaining a Return Authorization Number and paying shipping costs to return product to a Kanto location or authorized depot. If the equipment is covered under the warranty provisions above, Kanto will replace parts or provide a replacement unit, and be responsible for shipping costs to the customer. Please keep the original packaging to prevent damage to the product during shipping. Insuring your shipment is also recommended. The information in the manual has been carefully checked and is believed to be accurate. However, Kanto assumes no responsibility for any inaccuracies that may be contained in the manual. In no event will Kanto be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect in the equipment, even if advised of the possibility of such damages. This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty, including any warranty of merchantability and fitness for any particular purpose, all of which are expressly disclaimed

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>