SYLVANIA 4088632 Smart Plus LED Bulb User Manual

: June 5, 2024
: SYLVANIA

Table of Contents

DOWNLOAD APP AND INSTALLATION INSTRUCTIONS
WARNINGS AND CAUTIONS
LIMITED WARRANTY
Federal Communication Commission Interference Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SYLVANIA 4088632 Smart Plus LED Bulb User Manual

DOWNLOAD APP AND INSTALLATION INSTRUCTIONS

Download the SYLVANIA Smart WiFi app on Google Play or Apple App Store.
Open the App and select ‘Register’ to create new account or Log in with existing account
Type Email, then select ‘Get Verification Code’
Create password and select ‘Done’
Power up your SYLVANIA SMART WiFi device and select ‘Add Device’.
Tap ‘Go to add’ and select device to add.
Make sure the 2.4 GHz Wi-Fi is selected, type the Wi-Fi password and select ‘Confirm’.
Once the device has successfully completed the initialization process, you can control it and enjoy all the features using the Sylvania Smart WiFi app.

Go to “Settings” then select “Connect to Alexa or Google Assistant” to enable voice control

to connect to Google Assistant, you can scan below QR code to view video tutorial

to connect to Alexa, you can scan the below QR code to view video tutorial

to set up a Siri shortcut, scan below QR code to view video tutorial

WARNINGS AND CAUTIONS

To avoid personal injury and/or possible product damage, the following cautions must be followed:

Risk of electrical shock. Disconnect power at fuse or circuit breaker before installing or servicing.
To prevent early lamp failure, lamp should only be installed in operating environments ranging between: -20°C and +40°C (-4°F and +104°F)
Suitable for damp locations.
Not for use with dimmers.
Lamp dims via wireless control and will not operate with a dimmer switch.
Fully dimmable via compatible smart home app (Not compatible with traditional wall dimmers.)
Not for use in totally enclosed luminaires.
Not for use in emergency light fixtures or exit signs.
Ensure fixture can support the added weight of the lamp/bulb.
Smart Plug is designed to be used for low-power load equipment such as table/floor lamps, computers, and AV equipment. Do not use with high-power loads such as microwaves, coffee pots, refrigerators, washers/dryers, toasters/toaster ovens, or space heaters. Make sure the Plug is well seated in wall outlet.

LIMITED WARRANTY

The manufacturer warrants the product to be free from defects in materials and workmanship for two (2) years (non-Energy Star certified product) and three (3) years (Energy Star certified product) from date of purchase when used as directed. Failure to comply with Product warnings shall void the warranty. This warranty does not cover Product subject to accident, neglect, abuse, misuse, or acts of God. If Product fails to operate according to the warranty, the manufacturer will replace Product with the same or similar Product, at no charge. LABOR IS NOT INCLUDED. Product should be returned, together with proof of date of purchase, to the retail store where Product was purchased. For additional information, contact 1-800-LIGHTBULB (1-800-544-4828); Email: lightbulb@ledvance.com.

THIS IS THE EXCLUSIVE REMEDY AVAILABLE. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS EXPRESSLY EXCLUDED. SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE. THIS WARRANTY APPLIES TO CUSTOMERS PURCHASING THE PRODUCT FOR RESIDENTIAL USE ONLY.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. For more information go to www.ledvanceUS .comficcpart-I5b. CAN ICES-005 (B) / NMB-005 (B).

Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body.
WiFi Plug (75702-1, 75703-1, 75756-1):

Pollution degree: 2
Rated impulse voltage: 1500V

Sylvania smart devices are equipped with a WiFi + Bluetooth module that will help expedite the pairing process. Make sure that Bluetooth is enabled on your smartphone or tablet and the Sylvania Smart WiFi app will establish a connection with the smart device by a random negotiated key to complete the Bluetooth network configuration.

Google and Google Play are trademarks of Google LLC. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.

For more information, scan the QR code and follow additional instructions.

If you have any problem when using this product, you can contact us at
1-800-LIGHTBULB (1-800-544-4828)