D Addario DIY Solderless Pedalboard Cable Kit User Manual
- October 30, 2023
- D ADDARIO
Table of Contents
D Addario DIY Solderless Pedalboard Cable Kit
Product Information
DIY Solderless Pedalboard Cable Kit
The DIY Solderless Pedalboard Cable Kit is a cable kit that allows you to create custom-length cables for your guitar pedals. The kit includes a cable cutter, screwdriver, plugs, and cable. The cables use solderless technology, which means you don’t need to solder the cables together to create a secure connection. The patented Geo-Tip design ensures a secure connection in any instrument, pedal, or amp jack. The set screw provides ground connection and superior strain relief.
Product Usage Instructions
- Using the included cable cutter, cleanly cut the cable to your desired length, avoiding any loose or overhanging strands of shielding.
- With the included screwdriver, loosen the set screw on the plug to allow clear entry to the plug barrel.
- Push the cable into the open plug end with a twisting motion until it is fully seated.
- Completely tighten the set screw to ensure a secure connection.
- Repeat steps 2-4 for the other end of the cable.
That’s it! You now have a custom-length cable for your guitar pedals that provides a secure connection and superior strain relief.
INTRODUCTION
The D’Addario DIY Solderless Pedal Board Cable Kit is the ultimate solution for custom-wiring your pedal board or rack gear. Ordinary cable kits require soldering or manual stripping of wires which can lead to connection errors and frustration. The D’Addario cable kits are as simple as cutting the cable to length, placing the cable end into the plug end, and securing the set screw to produce flawless and great-sounding cables. The included plugs and cables are specially designed to provide the most accurate and reliable reproduction of your sound while the patented Geo-Tip design provides an improved connection in any pedal, amp, or jack.
- Solderless plugs connect to cable in seconds, creating custom lengths easily.
- Patented Geo-Tip design ensures an improved connection in any instrument, pedal, or amp jack
- 24k gold-plated tips for improved signal flow and corrosion resistance.
- Low capacitance cable design transmits full harmonic detail with the utmost transparency.
INSTALLATION INSTRUCTIONS
- Using included cable cutter, cleanly cut the cable to desired length avoiding any loose or overhanging strands of shielding.
- With the included screw driver, loosen set screw on the plug to allow clear entry to the plug barrel. Push cable into the open plug end with a “twisting” motion until it is fully seated.
- Completely tighten the set screw and that’s it!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>