SEALEY MK75 Parts Cart with Panel Train User Manual

June 16, 2024
SEALEY

SEALEY-logo

SEALEY MK75 Parts Cart with Panel Train

SEALEY-MK75-Parts-Cart-with-Panel-Train-product-image

Product Information

Specifications

  • Model No : MK75
  • Overall Dimensions : 1400 x 800 x 1870mm
  • Shelf Dimensions : 940 x 550 x 510mm
  • Max Capacity : 100kg

Introduction
The Parts Cart with Panel Train (Model No: MK75) is a versatile product suitable for use with windscreens, sheet metal, hoods, doors, and other large items. It includes 8 foam cushioned support arms to protect the items held within it. The cart is fitted with 4 castors, two of which have brakes, for maximum maneuverability and safe positioning. It also comes with 3 shelves, 2 600mm arms, and 6 S-shaped hooks.

Assembly
To assemble the panel stand, please refer to the parts diagram attached to the user manual. Follow the instructions provided in the diagram to properly assemble the cart.

Environmental Protection
We encourage you to recycle any unwanted materials associated with this product instead of disposing of them as waste. All tools, accessories, and packaging should be sorted and taken to a recycling center for proper disposal in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Important Note
It is our policy to continually improve products, and as such, we reserve the right to alter data, specifications, and component parts without prior notice. Please note that no liability is accepted for incorrect use of this product. The warranty for this product is valid for 12 months from the purchase date, and proof of purchase is required for any claims.

Contact Information
If you have any further questions or need assistance, please contact Sealey Group

  • Address : Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
  • Phone : 01284 757500
  • Fax : 01284 703534
  • Email : sales@sealey.co.uk
  • Website : www.sealey.co.uk

FAQ

  • Q: What is the maximum capacity of the Parts Cart with Panel Train?
    A: The maximum capacity of the cart is 100kg.

  • Q: Can I use the cart with other types of items besides windscreens, sheet metal, hoods, and doors?
    A: Yes, the cart can be used with other large items as well.

  • Q: Are the support arms cushioned to protect the items?
    A: Yes, the cart includes 8 foam cushioned support arms to protect the items held within it.

  • Q: How many shelves does the cart come with?
    A: The cart comes with 3 shelves.

  • Q: Does the cart have brakes on the castors?
    A: Yes, the cart is fitted with 4 castors, two of which have brakes for maximum maneuverability and safe positioning.

PARTS CART WITH PANEL TRAIN
MODEL NO: MK75
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT : PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

  • Refer to instructions
  • Wear protective gloves
  • Wear protective footwear

SAFETY

  • Only use on firm, level, unobstructed surfaces which are capable of supporting the cart and wheels.
  • DO NOT overload.
  • Always load evenly with the centre of gravity of the load as near the centre as possible.
  • Apply the brakes before commencing work.
  • DO NOT stand/ride on the cart, or allow others to do so.
  • Replace or repair damaged parts. Use only recommended parts. Unauthorized parts may be dangerous and will invalidate the warranty.
    WARNING! Failure to comply with these instructions may result in loss of load, damage to the cart or other property and/or personal injury.
    WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.

INTRODUCTION

Suitable for use with windscreens, sheet metal, hoods and doors as well as other large items. Panel train includes 8 foam cushioned support arms to protect the items held within it. Fitted with 4 castors, two with brakes, for maximum maneuverability and safe positioning. Also Includes: 3 Shelves, 2 600mm arms, 6 “S” shaped hooks.

SPECIFICATION

  • Model No …………………………………………………..MK75
  • Overall Dimensions ……………..1400 x 800 x 1870mm
  • Shelf Dimensions. ……………………940 x 550 x 510mm
  • Max Capacity. …………………………………………….100kg

ASSEMBLY

Assemble panel stand according to the parts diagram attached

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note : It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product.
Warranty : Guarantee is 12 months from purchase date, proof of which is required for any claim.

Parts Information : Parts Cart with Panel Train
Model No : MK75

Item Part No. Description
1 MK75.01 Top Connect Bar
2 MK75.02 Middle Connect Bar
3 MK75.03 Bottom Connect Bar
4 MK75.04 Upper Vertical Bar
5 MK75.05 Lower Vertical Bar (L)
6 MK75.06 Lower Vertical Bar (R)
7 MK75.07 Support Arm
8 MK75.08 Base Frame
9 MK75.09 Support Arm with Holes (L)
10 MK75.10 Support Arm with Holes (R
11 MK75.11 Mesh Shelf
12 SS850.S Hex Head Set Screw M8 X 50 Zinc
Item Part No. Description
--- --- ---
13 FWM8.S Flat Washer M8 Zinc
14 NLN8.S Nyloc Nut M8 Zinc
15 SS840.S Hex Head Set Screw M8 X 40 Zinc
16 MK75.16 Castor Wheel Set
17 MK75.17 Hook (L-Shape)
18 MK75.18 Vertical Support Arm with Foam
19 MK75.19 Support Buckle with Knob
20 MK75.20 Back Base Frame
21 MK75.21 Connector (L-Shape)
22 SS1050.S Hex Head Set Screw M10 X 50 Zinc
23 NLN10.S Nyloc Nut M10 Zinc
24 MK75.24 Side Pin (M8 x 50)

NOTE : It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. There may be alternative versions of this product, please contact us should you require this information.
IMPORTANT : No liability is accepted for incorrect use of product. Spare parts must be fitted by a competent person

WARRANTY

Guarantee is 12 months from purchase date, proof of which will be required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SEALEY User Manuals

Related Manuals