SOONWELL MT1 Handheld RGB Tube Light for Filmmaker User Manual

Soon well Handheld RGB
Tube Light for Filmmaker

MT1User Manual

FOR AWARD

Thanks for your purchasing the SOON WELL MT1!

• Please read this product manual carefully.
• Keep this product manual and always include it when passing the product onto third parties.

FEATURE

• I P68 waterproof level, support underwater shooting.
• Built-in 1/4 screw hole connector, support multi-lamp splicing.
• The built-in magnet module can be adsorbed anywhere
• Built-in 20 kinds of special effects.
• Built-in 28.5Wh battery, up to 2.8 hours run time
• APP control, Built-in Bluetooth module.
• CRI 96+, TLCI 97+, cinematic lighting quality.
• Portable, lightweight, and compact.

WARNING

Do not place the product near any corrosive chemicals. Corrosion may cause the product to malfunction
Please keep this product away from the harsh environment such as fire flame, high temperatures above 50°C, low temperatures below 0°C, dusty or heavy vibration.
Be careful to not damage the light by dropping it or otherwise introducing physical shock.
Please have the product checked by the authorized service or agent if your product has some problems. Please note that this warranty does not apply to repair arising out of the malfunction of unauthorized disassembly, although you may request such repairs on a chargeable basis.
Please note that this warranty does not apply to rep.

UNDERWATER PHOTOGRAPHY

When charging, please make sure that the charging hub is dry and free of water, to avoid damage to the charging cable or electric shock
Before using the tube underwater, make sure that the USB rubber is completely closed to prevent water from entering.
The underwater shooting depth should NOT exceed 5 meters/or 8 feet, otherwise, the control buttons on the touchpad will fail due to excessive water pressure.
Keep this tube away from chemical liquids such as alcohol to avoid corrosion.

PACKAGE LIST

The package included the follwing items

1. Carrying Bag X1
2. MT1 RGB Tube X1
3. User Manual X1
4. Safety Strap X1
5. Tube ConnectorXl
6. Mini Tripod X1
7. Type-C USB Cables X1

PRODUCT DETAILS

INSTALLATION AND USE

TYPE-C CHARGING

• As the light is charging, the on-screen battery level indicator will animate to show the battery’s status after the battery is fully charged,the battery level indicator will be displayed ad full
• Supports QC3.0 quick charging, Maximum output 9V/2A.
• Charging is slow when the light is powered on. Turn the light off for optimal charging.
• The on-screen battery indicator will flash when the battery level is too low.

POWER ON/OFF
Press and hold the power switch( )for 2 seconds to turn the light on or off
CCT SHOTTING COLOR TEMPERATURE MODE
Press the mode button( M)to access CCT modern CCT mode, Press the mode button(M) M ) to select target parameters, then press the back switch(< ) or the forward switch (>) button to adjust the parameter value Parameter Range: Color temperature level from 2600K to 6000K Brightness level between 0-100% GRN level between -0.1-+0.1
Exit: Press the mode button (M)to back to the main menu.
CCT -S: WIDE CO;OR  TEMPERATURE MODE
Press the mode button( M )to access CCT-S mode.ln CCT-S mode, Press the mode button ( M ) to select target parameters, then press the back switch( < ) or the forward switch ( > ) button to adjust the parameter value Parameter Range: Color temperature level from 1600K to 20000K Brightness level between 0-100%
Exit: Press the mode button ( M)to back to the main menu.

INSTALLATION AND USE

HSI MODE
Press the mode button (M)to access HSI modem HIS mode, Press the mode button( M) to select target parameters, then press the back switch( ( ) or the forward switch button ( > ) to adjust parameter value
Parameter Range:
Brightness between 0-100% SAT level between 096-100% HSI level between 0°- 360
Exit: Press the mode button ( M)to back to the main menu.
RGBW MODE
Press the mode button (M)to enter SET-RGBW mode.ln SET-RGBW mode, Press the mode button( M) to select target parameters, then press the back switch( ( ) or the forward switch button ( > ) to adjust parameter value.
Parameter Range:
R for a RED level between 1-225 G for GREEN level between 1-225 B for a BLUE level between 1-225 W for1NHITE level between 1-225
Exit: Press the mode button ( M)to back to the main menu.
BLUETOOTH AND GRAVITY SENSOR
Press the mode button ( M )to enter ON-OFF modeseep press the mode button ( M )to enter.ln ON-OFF mode, press the back switch( ( ) or the forward switch button ( > ) to turn BT/GS on or oft
Parameter Description:
BT:Blue Tooth GS=Gravity Sensor
INSTALLATION AND USE
FX MODE
Press the mode button ( M )to enter EFFECT-M modem EFFECIM mode, Press the mode button(M) to choose the Fx mode,then press the back switch( > ) orthe forward switch button (>  ) to adjust parameter value.
Parameter Range: Brightness between 0-100% Frequency level between 1-20 Exit: Press the mode button ( M)to back to the main menu.
Effects list

MEMORY MODE

Save lighting settings In any mode, short press the power switch button ( 0 ) to record the current lighting parameters, Call up light settings Press the mode button ( M)to select MEMORY mode,press the mode button (M )again to enter the MEMORY model”, MEMORY mode, you can use tthe back switch( ( ) or the forward switch button ( > ) to select the stored lighting settings; short press the power button again to recall the currently selected lighting settings.
MT1 tube can memorize up to four lighting parameters

INSTALLATION AND USE
USING THE MAGNETS

※Please only use SCONWELL’s connector to avoid damage the products

USING THE MAGNETS

This product is heavyweight and therefor cannot be adsorbe on the small metal
Do not attach this device to any surface with a temperature i above 60°, otherwise will damage the magnets
LIGHTING CONTROL APP
You can download the Lighting Control APP from download link or google play.
Any questions, please do not hesitate to contact us
Email: support@soonwell.com FB/INS @soo nwellfoto

SPECIFICATIONS

MTl llluminance Table

O.SM
l.OM| 1671/ 155
619 I 58
172 I 16
3200K| 0.3M
O.SM
l.OM| 1735 I 161
625 / 59
110 / 16
56DOK| 0.3M
0.5M
l.OM| 1917 / 11a
619 /58
112 / 16
6000K| 0.3M
0.5M
l.OM| 1671 /155
619 / 58
112 /16

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

https://www.soonwell.com/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>