CyMedica Electrode Placement User Manual
- June 5, 2024
- CyMedica
Table of Contents
CYMedica Electrode Placement
Introduction
The Medica electrodes are intended to be used with the CyMedica Orthopedics® NMES conductive garment. Refer to the provided NMES User’s Manual for Intended Use, Contraindications, Warnings, Precautions, and Adverse Reactions before operating the NMES System.
Explanation of Symbols
Electrode Placement Instructions
Electrodes must be placed on the garment in the labeled positions prior to use. Acquire electrode and electrode cover sets (See Figure 1).
Identify the labeled electrode placement outlines and electrode wiring male connectors on the garment (See Figure 2).
Remove and plug in a new electrode of the same size (2” x 2” or 2” x 3.5”) so that the male connector is completely covered (See Figure 3).
Position the electrode and attach the rough side to the garment within the placement outlines (See Figure 4).
Push electrode wiring back into the garment until connectors and wires are fully inserted (See Figure 5).
Remove the clear plastic liner from top sticky surface of the electrode and discard (See Figure 6).
Place the reusable electrode cover over the sticky surface of the electrode (See Figure 7).
Repeat the process for the remaining two electrodes until all electrodes have been installed (See Figure 8).
If you have an app-based device and this is your first time using the CyMedica NMES system, continue to download the appropriate app from the App Store for iOS or Google play for Android and follow the on-screen instructions for use.
Electrode Replacement Instructions
Electrodes must be replaced when they begin to deteriorate or lose adhesion.Note the orientation of the electrode to be replaced. Detach the electrode from the garment (See Figure 9).
Carefully pull the white wire connected to the electrode out of the garment until the second wire (black, blue, red) is exposed (See Figure 10).
Unplug the electrode wire (See Figure 11).
Discard the used electrode but keep the black electrode cover (See Figure 12).
Replace the discarded electrode by following the Electrode Placement Instructions section in this manual.mergo Europe Prinsessegracht 20 2514.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>