beamZ HN200827 Lightbox 5 LED Effects User Guide
- June 5, 2024
- beamZ
Table of Contents
beamZ HN200827 Lightbox 5 LED Effects
INSTALLATION
CAUTION
Please consider the respective national norms during the installation! The
installation must only be carried out by an authorized employee or dealers.
This fixture has been designed to be hung. It is recommended for safety purposes, your lighting effect is properly mounted using a suitable hanging clamp and safety cable. Items appropriate for safe and effective mounting are easily sourced from your lighting vendor. International laser safety regulations require that lasers must be operated in the fashion illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation between the floor and the lowest laser light vertically. Additionally, 2.5 meters of horizontal separation is required between laser light and the audience or other public spaces.
CAUTION
Use of controls, adjustments, or performance of procedures other than what is
specified herein may result in hazardous radiation exposure.
- • The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harmful deformation.
• Always use the supplied mounting bracket to hang the fixture.
• The fixture should aid of a mounting bracket (not included) to the supplied mounting bracket to be confirmed.
• The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main attachment fails.
• Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging, and servicing.
• The operator has to make sure that safety-relating and machine-technical installations are approved by an expert before taking them into operation for the first time and after changes before taking into operation another time.
• The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled person once a year.
• The fixture should be installed in a position where persons cannot reach it.
• For your own safety and for others, we do strongly recommend you to use this laser emergency kill switch.
CAUTION
When installing the device, make sure there is no higher inflammable material
(decoration articles, etc.) in between a distance of min 0.5 meters.
RIGGING
The unit may be set up on a stable and even surface. By means of the fixing
facilities of the baseplate, the unit can also be mounted upside down to a
truss, see the below picture. For fixing, certified clamps with correct save
working load is required. According to the figure, the quick-lock bolts of the
omega brackets are placed into the openings provided in the base plate and
turned clockwise until they lock (to the stop). The mounting place must be of
sufficient stability and be able to support a weight of 10 times the unit’s
weight. Secure the unit with a safety cable so that it cannot fall down.
When carrying out any installation, always comply with European and national
guidelines concerning rigging, truss, and all other safety issues. Always let
the installation be checked out by an authorized dealer!
REMOTE CONTROLLER
- Sets the unit into a blackout on or off
- Puts the unit into auto mode
- Select the color of the derby
- UV light on or OFF
- Puts the unit into a sound mode
- No function
- Strobe white LEDs
- Derby affect motor speed
- Sets the speed of color change, color fade, sound active, and strobe modes
- Sets the sound sensitivity level – Use the ‘+’ and ‘-’ buttons to change the desired sound sensitivity level (note: only available in sound active mode)
CONTROL MENU
| |
---|---|---
A001| A001- A512| DMX address setting
LE1| LE11-LE19| Magic ball red, 1-9 adjust motor
speed
LE2| LE21- 29| Magic ball green, 1-9 adjust motor speed
LE3| LE31- 39| Magic ball blue, 1-9 adjust motor speed
LE4| LE41- LE49| Magic ball white, 1-9
adjust motor speed
LE5| LE51- LE59| Magic ball auto run, 1-9
adjust motor speed
LS| LS1- LS9| Laser auto run, 1-9 adjust
motor speed
PU| PU1- PU9| UV light
PAR| PAr1- PAr9| PAR lamp auto program
FL| FL1- FL9| Strobe, 1-9 adjust light speed
AU1| Au11- A19| Auto program, 1-9 adjust
run speed
S1| S11- S19| Sound program 1, 1-9 adjust
sensitivity
S2| S21- S29| Sound program 2, 1-9 Adjust sensitivity
DMX CHANNELS
CHANNEL | FUNCTION | VALUE | DESCRIPTION |
---|---|---|---|
1 | Speed | 000- 255 | Rotation speed, from |
slow to fast
2| Jellyball motor| 000- 255| Rotation 0-340°
| | 128- 255| Automatic rotation
3| Laser rotation| 000- 009| No function
| | 010- 255| Rotation from slow to fast
4| Master dimmer| 000- 255| Dimmer, 0-100%
5| Master strobe| 000-010| No function
| | 011- 255| Strobe all, from slow to fast
6| Colour Jellyball| 000- 255| Red, 0-100%
7| | 000- 255| Green, 0-100%
8| | 000- 255| Blue, 0-100%
9| | 000- 255| White, 0-100%
10| Laser| 000- 255| Red laser,0-100%
11| | 000- 255| Green laser, 0-100%
12| Colour LED| 000- 255| Red, 0-100%
13| | 000- 255| Green, 0-100%
14| | 000- 255| Blue, 0-100%
15| | 000- 255| White, 0-100%
16| UV| 000- 255| UV, 0-100%
17| White strobe| 000-010| No function
| | 011- 255| Strobe from slow to fast
18| Macro| 000- 050| No function
| | 051- 150| Auto program
| | 150- 255| Sound program
Documents / Resources
|
beamZ HN200827 Lightbox 5 LED
Effects
[pdf] User Guide
HN200827 Lightbox 5 LED Effects, HN200827, Lightbox 5 LED Effects
---|---