dji Zenmuse H20N Integrates Starlight Sensors for Night Vision User Guide
- June 5, 2024
- DJi
Table of Contents
dji Zenmuse H20N Integrates Starlight Sensors for Night Vision
Disclaimer and Warning
Congratulations on purchasing your new DJITM product. The information in this
document affects your safety and your legal rights and responsibilities.
Please read this entire document and all safe and lawful practice DJI provided
carefully, and visit the DJI official website (https://www.dji.com) to
download the full version of the user manual and carefully read all
instructions and warnings therein before assemble, set and use. Failure to
read and follow instructions and warnings in above documents or lack of strong
awareness of safety during the operation may result in serious injury to
yourself or others, or damage to your DJI product or damage to other objects.
This document and all other collateral documents are subject to change at the
sole discretion of SZ DJI Technology Co., Ltd. (DJI). They may be updated,
changed or terminated without prior notification. For up to date product
information, visit https://www.dji. com and click on the product page for
this product. DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated
as “DJI”) and its affiliated companies. Names of products, brands, etc.,
appearing in this manual are trademarks or registered trademarks of their
respective owner companies.
Export Compliance, Disclaimer & Indemnity
You acknowledge it is your responsibility to comply with applicable export
control laws. You shall solely be responsible for the legal responsibility if
any of your use, sale, transfer, rental, or other conduct related to the
Products fail to comply with the applicable export control laws. DJI shall, in
no circumstances, be responsible for your violation of any applicable export
control laws. Furthermore, you shall indemnify, defend, and hold harmless DJI,
its affiliates, directors, officers, employees, agents, and representatives,
from and against any and all claims, demands, suits, causes of action,
expenses (including reasonable attorneys’ fees), damages, losses, or
liabilities of any nature whatsoever, arising from, or allegedly arising from,
or related to, your failure to comply with applicable export control laws.
Modification Warning
The ZENMUSETM H20N has been calibrated specifically for the designated camera
and lens before leaving the factory. No physical or mechanical modification or
adjustment of the gimbal is required or recommended. DO NOT add any other
component or device (such as a filter, lens hood, etc.) to the camera. The
Zenmuse H20N is a delicate instrument. DO NOT disassemble the gimbal or camera
as this will cause permanent damage.
Aircraft Compatibility Warning
The Zenmuse H20N is compatible with the DJI MATRICETM 300 RTK. To optimize the
performance of the gimbal, download the latest version of the DJI Pilot 2 app
and update to the latest aircraft firmware. Otherwise, the Zenmuse H20N may
not function properly.
Safe Use
Make sure to operate your aircraft in the safest manner possible. Observe the
procedures contained in the user manual and the online tutorials to mount and
connect the gimbal to your aircraft. By using this product, you hereby signify
that you have read this disclaimer and warning carefully and that you
understand and agree to abide by all terms and conditions of this document and
all relevant documents of this product. You agree that you are solely
responsible for your own conduct while using this product, and for any
consequences thereof. You agree to use this product only for purposes that are
proper and in accordance with all applicable laws, rules, and regulations,
including international and domestic airspace regulations, and all terms,
precautions, practices, policies, and guidelines DJI has made and may make
available.
DJI accepts no liability for damage, injury or any legal responsibility
incurred directly or indirectly from
the use of this product. The user shall observe safe and lawful practices
including, but not limited to,
those set forth in the User Manual.
In the Box
-
× 1Gimbal and Camera (microSD card included)
-
× 1Storage Case
-
× 1Lens Cleaning Cloth
-
The Zenmuse H20N has its own storage case only when purchased individually.
Zenmuse H20N
Equipped with two long-wave infrared thermal cameras, a zoom camera, and a
wide-angle camera, the Zenmuse H20N gimbal camera can provide infrared and
visual images simultaneously. Users can quickly switch to a highly magnified
zoom camera view after recognizing a target in a wide camera view. Thanks to
the laser range finder, the H20N can provide the location of a target and the
distance
to them during a search and rescue operation or aid in site inspection with
rapid positioning information
that improves working efficiency.
Zenmuse H20N can be mounted onto the Matrice 300 RTK aircraft and stream live
video to the DJI Pilot 2 app.
- Gimbal Connector
- Pan Motor
- Wide Infrared Thermal Camera
- Wide Camera
- Laser Range Finder
- Tele Infrared Thermal Camera
- Zoom Camera
- Tilt Motor
- Roll Motor
- microSD Card Slot
Installation
- Remove the gimbal cap and lens protector.
- Align the white and red dots and insert the gimbal onto the Matrice 300 RTK aircraft. Rotate the gimbal connector to the locked position.
Camera Controls
Remote Controller
Adjust the gimbal’s tilt using the left dial and adjust its pan by the right
dial. Press the shutter button or record button to take photos or record
video. Toggle the 5D button vertically to adjust the zoom and horizontally to
adjust the EV value. The customizable button C1 can be used to recenter the
gimbal, and the customizable button C2 can be used to switch between the main
and auxiliary screen.
- Left Dial
- Record Button
- Shutter Button
- Right Dial
- 5D Button
- Customizable Button C2
- Customizable Button C1
DJI Pilot 2 App Controls
Besides capturing photos, recording videos, and providing playback, the touch
interface provides more
intuitive and convenient control options such as Auto Night Scene, Spot Meter,
Isotherm functions, and Link Zoom for visual and infrared thermal cameras.
The following image is for reference only. The actual interface varies
according to the version of the app.
- Camera and Zoom Rate
- Palette/Isotherm
- Display Mode
- FFC Calibration
- Camera Settings
- Photo/Video Switch Button
- Zoom (Zoom Camera)
- Shutter/Record Button
- Link Zoom
- Playback
- Zoom (Infrared Thermal Camera)
- Gimbal Tilt
- Laser Ranging
- Wide Camera View Switch Button
- Pin Point
- Zoom Camera View Switch Button
Specifications
