Smatree Cootree C220 Mini Foldable Flexible Sweat Proof Wireless Bluetooth 4.0 Headset User Guide

Cootree C220 Mini Foldable Flexible Sweat-Proof Wireless Bluetooth 4.0

Headset

 INTRODUCTION

Thank you for using Cootree Bluetooth stereo headset. It makes you achieve the wonderful experience of using wireless which is your best choice while in office, driving and outdoor activities. Read this user’s guide carefully before using the headset. Read also the user’s guide for your phone, which provides important safety and maintenance information. Keep the headset and its’ accessories out of children below 6 years in age.

BLUETOOTH WIRELESS TECHNOLOGY

Bluetooth wireless technology allows you to connect compatible communication devices without cables. The Bluetooth connection does not require that the phone and the headset be in line of sight, but both devices should be within 10 meters (30 feet) of each other.
Connections can be subjected to interference from obstructions, such as walls or other electronic devices. The headset is with Bluetooth 4.0 supporting the following profiles: HSP (Headset Profile) and HFP (

Hand-Free Profile ).
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Check with the manufacturers of other devices to determine their compatibility with this device. There may be restrictions on using Bluetooth technology in some location. Check with your local authorities or service provider.

GETTING TO KNOW YOUR BLUETOOTH STEREO HEADSET

1. MFB Button(Multi-Functional Button):Power On/Off ,Answer/End Call ,Pair the Headset ,Voice Dialing ,Re-dial Call ,Rejects Call
2. Backward ButtonForward Button
3. Play/Pause
4.  LED Indicator :Blue/Red
5. USB Power Charging Por
6. Volume button +
7. Volume button –
8. Microphone

The picture is for reference only. Please check the product for details.
Note: Parts of the headset are magnetic, Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, to avoid information stored on them may be erased.

INDICATOR LIGHT INSTRUCTION

Turn ON the Bluetooth Headset: When the headset is off, press and hold the MFB button for 4 seconds to turn on the Bluetooth Headset, the LED will be ON and flashing every 3 seconds Turn OFF the Bluetooth Headset: When the headset is on, press and hold the MFB button for 3 seconds to turn on the Bluetooth Headset, the LED will be OFF.
Battery Level is Full: RED LED will be off
Battery Level is Low: RED LED will be flashing
Standby Mode: BLUE LED will be flashing
Pairing Mode: RED&BLUE LED will be Flashing Alternately
Note: You can’t set your mobile phone to search and pair with the headset unless the headset under pairimngo de.

HOW TO PAIR THE HEADSET WITH A COMPATIBLE PHONE

1. Make sure the headset is power off. If not, then press the MFB button for about 3 seconds till the pink light flash 3 times to power off.
2. Press and hold the MFB button, not release, ignore the Pink light flash, until the RED and BLUE light flash alternately (Pairing mode). This press may last about 8 seconds.
3. Switch on your mobile phone s’ bluetooth function, then,click to search for new bluetooth devices. Ensure the headset is still in pairing model.
4. Your mobile phone will find new bluetooth devices named “Cootree 220” ; click the device to pair with it.

HOW TO PAIR COOTREE 220 WITH 2 MOBILE PHONES

Cootree 220 is capable of having two mobile phones connected to the headset at the same time. This will give you the freedom of having only headset to operate both your mobile phones.

1. Pair the second mobile phone
   After paired Cootree 220 with the first mobile phone, turn off the Cootree

2. Then press the MFB button of Cootree for 7 seconds until the Blue and Red LED flash alternately. It means the headset enter the pairing mode. Go to the second mobile phone’s Bluetooth menu and search the headset and pair with it.

3. After pairing the second mobile phone, the first mobile phone will be disconnected with Cootree 220, so you need to connect the first mobile phone from the phone setting, so that BOTH mobiles are connecting with the Cootree 220.

LAST NUMBER REDIAL AND THE VOICE DIALING FUNCTION ONLY WILL WORK ON THE FIRST CONNECTED MOBILE PHONE.

VOLUME CONTROL
When talking or playing music, short press the “+” to increase the volume, short press” ss t“o lower the volume.

FORWARD / BACKWARD
When playing music, you can press the”Forward” button to play the next song and the “Backward” button to play the previous song.

PAUSE PLAYING
When playing music by using stereo Bluetooth headset, shortly press the MFB key to pause playing, shortly press the MFB again to go on playing.

SETTING MUSIC
If connecting successfully, most mobile phone automatically support playing music by using Bluetooth headset, but some mobile phone need to be set. When playing music, please choose Bluetooth A2DP service to play music. For more details, please refer to the User Manual of your mobile phone (Only for stereo Bluetooth headset).

ANSWER CALLING
When calling, the headset has a “TONE” or “BUZZER ” tone, just press the MFB key shortly to enter Talking mode.

REJECT CALLING
When calling, press the MFB key shortly for 2-3 seconds or longer and release our hand until you hear a TONE, then it will reject calling in.

END CALLING
When in talking mode, press the MFB key shortly to end the call.

REDIAL LAST NUMBER
When in a standby mode, press the MFB key longer or shortly twice to redial the last call.

DISCONNECT THE HEADSET FROM THE PHONE. (For example, to connect the phone to another Bluetooth device)

1. Switch off the headset.
2. Disconnect the headset in the Bluetooth menu of your phone.
3. Move the headset more than 10 meters (30 feet) away from the phone.

You needn’t to delete the pairing with the headset to disconnect it.

CHARGERS AND BATTERIES
Make sure to use the proper DC/AC charger to charge the headset. (Require the charger with 5V USB output.)
Warning: Use only chargers are approved. The misuse of the charger may damage the headset.

CHARGE THE BATTERY

This device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device.

1. Connect the charger cable to the headset.
2. Connect the charger cable to AC / DC power (5V output). The red led turns on during charging. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take 2-3 hours.
3. When the battery is fully charged, the red led turns off and the blue indicator light turns on.

The fully charged battery supports up to 16 hours of music playing time or up to 250 hours of standby time. However, the talk and standby times may be different with different mobile phones, devices that use a Bluetooth connection, usage settings, styles and environments.

PROBLEMS AND SOLUTIONS

Problems description|

Cause

|

Solution

---|---|---

Can not start

| The battery low power| Charge the battery fully before use

Press MFB button too short

|

Press the MFB button for 4 seconds to re-start the headset

Can not charge| Plug is not placed well|

Check the Plug well

Can not connect the headset to your phone

|

The headset is not in searching status

|

Swith off the headset, then Press the MFB button on the top of the headphones for about 8 seconds until the light flashes blue and red alternately (NOT PINK)

The Bluetooth feature is not activated on your phone| Ensure that the Bluetooth feature is activated on your phone

( setting– >Bluetooth)

Mobile phone Bluetooth software error|

Close the mobile phones and re-start

The headset is out of its range(within 10 meters)|

Check that the headset is within 10 meters(30 feet) of your phone

There are some obstructions between the headset and the phone| Check that if there is obstruction between the headset and the phone(such as walls or other electronic devices)

Cootree: Your support to our motivation If for any reason you are unhappy with any product by Cootree, please do not hesitate to contact us. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently! Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning
Changes or modifications made to this device not expressly approved by Smatree may void the FCC authorization to operate this device.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. RF exposure statement: The device compliance RF exposure requirement and can be installed and used without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>