FAQs How to activate the device? User Manual
- June 5, 2024
- FAQs
Table of Contents
FAQs How to activate the device?
FAQs
How to activate the device? How to set the time? How to connect mobile phone and Band?
For the first time, activate, connect to the mobile phone, and automatically synchronize the time Remove the strap with the built-in USB side and activate the ID155 via a standard USB plug.
-
Download “VeryFit” APP for Android and iOS devices.
Option 1: Search for “VeryFit” in APP store or Google Play and download it to your smartphone. Option 2: Scan the QR code, download and install the APP. -
Enable Bluetooth before binding the device.
-
Open “VeryFit” APP on your smartphone and tap on “Device” →”Add device”, then your smartphone starts searching for devices.
-
Select your device in the list of found devices, connect the device to your smartphone.
Tip: To avoid signal interference, remove other Bluetooth devices near the fitness tracker.
Unit setting, km→mile. Time format (24-hour or 12-hour)
Open “VeryFit” APP → “My” → “Settings” → “Preferences”
Heart Rate
The best place to monitor your heart rate is one finger-width away from your
wrist bone, as shown in the image below. The back of the smartwatch touches
the skin. Stay still while measuring.
Incoming call, SMS, SNS notification
Open “VeryFit” APP, “Device” → “notification management”
Tip:Calls/SMS notification function works when the device connects to your
smartphone via APP.
Why is the phone and Band often disconnected?
You need to make sure that the app is running in the background and not going
into “sleep” mode. You need to whitelist the “VeryFit” APP. Go to phone
settings → battery optimization.
You can view the VeryFit > My > Background protection guide. There are
teachings for the background operation settings of different brands of mobile
phones.
Solution for WhatsApp only notifications but no text content.
WhatsApp> Settings> notifications> use high priority notifications
Family Member Sharing Feature.
One mobile phone can manage multiple ID155 Smart Bands.
APP”VeryFit”>Home>My Family>Family Members
Why does the sensor on the Band’s back glow green at night?
This is because you have turned on [24/7 heart rate monitoring]. You can turn
off this function in the APP “VeryFit”.
Precautions:
These are the possible causes of damage to the band:
- The bracelet is IP68 waterproof and can be worn for swimming in shallow water. But it is not resistant to high temperature and water vapor. Please do not wear it for hot baths, saunas, hot springs, sun baths.
- The requirement of the charger is 5V/500mA, do not charge for a long time, it may burn out the electronic components inside.
- Please make sure that the charging port is dry before charging, so as to avoid short circuit caused by moisture in the charging port.
ONE-year hassle-free warranty
We strive to build our products with the highest attention to detail and
craftsmanship. However, sometimes there are occurrences of a defect, so we are
happy to offer a ONE-year hassle-free warranty on all our devices as we
continue to make amazing products. Please contact us if you have any questions
about our devices.