iPGARD SA-KMN-8S-P 8 Port Secure KM Switch User Guide
- June 3, 2024
- iPGARD
Table of Contents
iPGARD SA-KMN-8S-P 8 Port Secure KM Switch
TECHNICAL SPECIFICATIONS
USB
Signal Type
| USB 1.1 and 1.0 Keyboard and Mouse only.
USB 2.0 for CAC connection.
USB Connectors| (16) USB Type B
User Console Interface
| (2) USB Type A for keyboard/mouse connections;
(1) USB Type A for CAC
AUDIO
Input| (8) Connector stereo 3.5 mm female
Output| (1) Connector stereo 3.5 mm female
POWER
Power Requirements| 12V DC, 3A power adapter with center-pin positive polarity
ENVIRONMENT
Operating Temp| 32° to 104° F (0° to 40° C)
Storage Temp| -4° to 140° F (-20° to 60° C)
Humidity| 0-80% RH, non-condensing
CERTIFICATIONS
Security Accreditation| Common Criteria Validated To NIAP, Protection Profile
PSS Ver. 4.0
OTHER
Emulation| Keyboard, mouse, and video
User Controls| Front-panel buttons
WHAT’S IN THE BOX
| PART NO. | QTY | DESCRIPTION |
|---|---|---|
| SA-KMN-8S-P | 1 | 8-Port SH Secure KM with Audio and CAC Support |
| PS12VDC3A | 1 | 12VDC, 3A power adapter with center-pin positive polarity. |
| 1 | Quick Start Guide |
NOTICE
The information contained in this document is subject to change without
notice. iPGARD makes no warranty of any kind with regard to this material,
including but not limited to, implied warranties of merchantability and
fitness for a particular purpose. iPGARD will not be liable for errors
contained herein, or for incidental or consequential damages in connection
with the furnishing, performance, or use of this material. No part of this
document may be photocopied, reproduced, or translated into another language
without the prior written consent from iPGARD, Inc. 20170518
Toll Free: (888)-994-7427
Phone: 702-800-0005
Fax: (702)-441-5590 WWW.iPGARD.COM
INITIAL SETUP
After connecting all devices to the SA-KMN, a default display topology
configuration and display mode will be in effect. By default the SA-KMN is
configured to Single-Head mode and a topology with 8 screens arranged
horizontally starting with port 1 on the left hand side. If a different
display topology configuration and display mode is desired. See the full
manual for details on available settings. The installation setup must match
one of the SA-KMN predefined display topology configurations. This can be
selected through keyboard hotkey commands. Please refer to Display Topology
Configuration in the full manual for the available display topologies. If one
or more of the input computers have multiple displays, Multi-Head Display Mode
must be selected. Otherwise, select Single-Head mode.
Optional display topology
SEE THE FULL MANUAL FOR MORE INFO.
A full Manual can be downloaded from
www.ipgard.com/documentation
- iPGARD Secure PSS is compatible with standard personal/portable computers, servers or thin-clients, running operating systems such as Windows or Linux.
- The peripheral devices that are supported by the KM are listed in the following table:
Console Port| Authorized Devices
---|---
Keyboard
| Wired keyboard and keypad without internal USB hub or composite device
functions, unless the connected device has at least one endpoint which is a
keyboard or mouse HID class, KVM/KM extender;
Audio out| Analog amplified speakers, Analog headphones, Digital audio
appliance.
Mouse/Pointing Device| Any wired mouse or trackball without internal USB hub
or composite device functions, Touch-screen, Multi-touch or digitizer, KVM/KM
extender.
User Authentication Device| Smart-card reader, PIV/CAC reader, Token or
Biometric reader
HARDWARE INSTALLATION
- Ensure that power is turned off or disconnected from the unit and the computers.
- Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit.
- Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the computers to the AUDIO IN ports of the unit.
- Connect a USB keyboard and mouse in the two USB console ports.
- Optionally connect stereo speakers to the AUDIO OUT port of the unit.
- ptionally connect CAC (COMMON ACCESS CARD, SMART CARD READER) to the CAC port in the user console interface.
- Power on the KM by connecting a 12VDC power supply to the power connector, and then turn on all the computers.
Note: The computer connected to port 1 will always be selected by default
after powering up.
Note: You can connect up to 8 computers to the 8 port KM.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>