Dual Dash Cam Front and Inside 1080P Dash Camera for Cars IR Night Vision-Complete Features/Instruction Manual

Dual Dash Cam Front and Inside 1080P Dash Camera for Cars IR Night Vision

Specifications

• DIMENSIONS : 1.37 x 4.3 x 1.57 inches
• WEIGHT : 13.7 ounces
• VIDEO CAPTURE: 1080P
• DISPLAY TYPE: LCD
• SUPPORTED STANDARDS: MP4
• REAL ANGLE OF VIEW: 170 Degrees
• BRAND: Lamtto

Introduction

The Lamtto Dual Dash Cam is the perfect dash camera for your car which offers IR night vision. It features a 1080P recording and HDR technology which makes the images and video recording clear and detailed. This dashcam allows you to record simultaneously the interior and back of the car with the audio as well. This dashcam is perfect for accidental situations as it provides clear and detailed video evidence. It has the ability to capture clear video in low lights and dark with four infrared lights. It features a 310 degrees wide angle of the field of view. The reach of the front angle is 170 degrees and records the blind spots of the car as well. The interior lens has the capability to record a full angle of 140 degrees, which finely records the entire interior of the car.

Another important feature of the dual dash cam is the loop recording. This function allows continuous recording of the surroundings. It also deletes the oldest stored video automatically to free up space, to record the latest video, in case the memory gets full. The Lamtto dual dash cam has the ability to hold an SD card of up to 128 GB, but the SD card isn’t included in the package.

The dashcam features a G-sensor which has the ability to sense accidents. It has a feature that allows you to turn on the record in the parking mode. In this mode, the dual dash cam can record the surroundings of the car, when it is parked. The dashcam is easy to install on the windshield and doesn’t have any complicated settings. It can also record videos in the screen off mode.

Important Notice

• This product is intended for using in motor vehicles only. Do NOT install the camera where it might block the driver’s view of road (including the mirrors) or the deployment of the airbag.
• Before using this device, please insert the memory card first, and need to format micro-SD card to FAT32 format on PC firstly, then format the memory card in camera menu.
• This camera records video at high resolution. Be sure to use high speed Micro SO card. Class 10 or above 16 GB or 32 GB Micro SD card is recommended.
• For safety reasons, this camera has a small built-in battery, which is used to save the video file after external power supply cuts off (car turns off).
• Be sure the camera lens is clean and there is nothing blocking the lens.
• DO NOT leave the camera in direct sunlight for a long period of time or where the temperature could go above 140°F(60°C).

Interface and Button Function

1. Inside Lens
2. Front Lens
3. MIC
4. Screen
5. Mini USB Power in
6. Mount Socket
7. Rear Cam Interface
8. Down
9. Menu
10. UP
11. OK
12. Power
13. Reset
14. Memory Card Slot

Button Function

Set up and Installation

1. Before installation, please check the camera’s normal function, and make sure you are using a high-speed Micro SD card (speed Class 10 or above), and format the card in the camera menu before recording.
2. Use the suction cup mount to install the dash cam on the windshield. The recommended location is near the rearview mirror facing front, adjust the lens angle for best coverage.
3. Adjust the lens angle of the camera, make sure you get the best coverage over the hood and the road ahead, so you can record what happens.
4. Connect the power to the camera and the cigarette lighter, hide the rest of the cable in the gap of the interior trim board.

Operating Mode

The dash cam operates in 3 modes: Video Recording Mode, Photo Mode and Playback Mode. These modes also have menu to help you configure recording and taking photos. Long press menu button to switch between different modes and access to the mode you want. Watch the icon on top left corner of the screen for each mode.

Video Recording Mode

The camera will automatically enter Video Recording Mode and start recording when connected to a car charger and power on. A Red dot flashing on the top left corner indicates recording is in progress. Press the OK to stop recording, or start recording again.

1. Video Mode Icon
2. Loop Recording
3. Exposure
4. G-Sensor
5. Recording Time
6. Resolution
7. Parking Monitor
8. LED Status
9. Memory Card Status
10. Power Status
11. Audio Status
12. Time & Date

In all 3-operating modes, you can press the Menu button once to access the menu settings for that particular mode, and press twice to display System Setting Menu. The System Setting Menu is common to all modes, See page 10 to page 11. Press UP and DOWN to scroll through the various setting options and press OK to select and confirm selection, Press MENU again to exit the setting menu.

Video Recording Menu

Cyclic Record: This function allows you to set video length to 1/3/5 minutes. Select a value to activate loop recording, so when storage is full, it will automatically overwrite the earliest video file

Exposure: Adjust the exposure value to adjust the brightness of the video. Motion Detection: When the camera detects movement or dynamic changes in the picture, it will start recording.

Gravity sensing: G-sensor will detect significant or sudden shock and movement, then automatically locks the current file from loop recording, Low/Medium/High sensitivity are available.

Parking Guard: It’s used to protect your car after parking. With this function on, after you stop the car and the camera turns off, it stays on standby. When the camera detects shock and collision, it will automatically turn on and take a short video. then shut down automatically.

Car Number: On/Off the license plate display function to customize the license plate number

Photo Taking Mode

The camera can operate in Photo Taking Mode, and take HD photos up to 10 Megapixels.

To take a photo
Simply power on the camera. Long press MENU to select Photo Mode, and Press OK to take photo. Like the Video Recording Mode, you can press the Menu button once to access the setting menu for Photo Mode, Press Menu twice to enter system setting menu.

Photo Mode Menu

Resolution: Set the photo resolution, up to 10 Mega Pixels available. Anti-Shaking: Turn ON/OFF the image stabilization function. Date Stamp: Enable/Disable the date and time marks in image files.

Playback Mode:

This mode allows you to playback recorded video or view photos.

1. Stop video recording, and long-press the MENU button twice to enter playback mode.
2. Use UP and DOWN buttons to scroll through the recorded files/ photos, and press OK to view the recorded video.

Playback Menu
After choosing a recorded video or photo, press the Menu button once to access the setting menu for Playback Mode.

Delete: Delete the current file displayed or delete all files. Protection: Lock/Unlock the current file displayed or Lock/ Unlock all files.

System Setting Menu
Press the MENU button twice to access the System Setting Menu in any mode. The TOOL icon is highlighted in the upper left corner.

LCD Brightness : Set the time to automatically turn off the LCD display after no operation.

Auto Power Off : Set the time for the camera to automatically power off to save power. The camera will automatically power off when it is on standby under the setting time.

Frequency : Set light frequency to 50Hz or 60Hz according to local regulation.

Beep Sound: Turn on/off sound when you press any button. Language: Chinese/Japanese/English/etc.

Date/Time: Change the time and date by using the UP and DOWN button, then press OK to confirm changes, press the MENU button again to exit time setup,

IR LED Setup: Setup the IR LED lamp working mode, Always ON / Always OFF or Auto, in Auto mode, the IR LEDs will light when the current environment is too dark,

Format: Format the Micro SD card,

Default Setting : Reset all settings back to factory default

Version : Check the firmware version.

FREQUENTLY ASKED QUESTIONS

• When pressing the menu button, why it’s not displayed the menu of the system?
  Please press the OK button to pause the recording first.

• The SD card gets full and it doesn’t overwrite?
  Please check whether all video files are locked and cannot be overwritten, please format the micro-SD card and adjust the sensitivity of the G-sensor.

• The suction mount cannot attach on the windshield well?
  Please clean the windscreen were attaching with a glass cleaning wipe. Removed the protective ‘Alm, if it does not work, warming your windscreen then try it again.
  Please soak the suction mount to warm water for a moment.
  If it is still not working, we are glad to send a new suction mount to you, please contact us to get a replacement.

• Even though set the screen saver, but the screen will randomly turn on?
  The power supply might not be stable, please change another car charger to try.

• Does the cab camera Record audio?
  Yes, it does

• How do I get the data from the micro-SD to my computer?
  You can transfer the data from you SD card to your computer using the SD card reader

• Are you able to access videos on the camera or only on the computer when we remove the SD card?
  No, you can’t view the video on the camera, you will have to use the mini- USB cable which is provided in the packaging or a card reader to connect the camera to your computer and watch the videos.

• Can the rear camera be mounted outside?
  Yes, it is waterproof.

• What is included in the box with the dashcam?
  The Dash camera and cables.

• Is there an app to download to be able to see from my phone?
  No, there is no such app, you can connect the camera to your computer, however.

https://m.media-amazon.com/images/I/B1o0ptpRNhL.pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>