CHAMPION 201120 4650W Dual Fuel Electric Start Inverter Generator User Guide
- June 5, 2024
- Champion
Table of Contents
CHAMPION 201120 4650W Dual Fuel Electric Start Inverter Generator
Set-Up
-
Open shipping carton. ° Assembly > Unpacking
-
Connect the battery. ° Assembly > Connect the Battery.
Push two halves of battery connector together tightly. -
Add oil. ° Assembly > Add Engine Oil.
Recommended: 10W-30, up to 16.9 fl. oz. (500 ml) DO NOT overfill. -
Move the generator outdoors.
-
Move generator to an open, outdoor area.
Point exhaust away. Never run a generator in enclosed areas (e.g., not in house or garage). -
Keep all objects at least 5 feet (1.5 m) from the generator. The heat from the muffler and exhaust gas can ignite combustible materials.
-
Add fuel – Gasoline or Propane (LPG)
Assembly > Add Fuel -
DO NOT plug in any electrical devices
-
Starting the Engine: Gasoline
-
Electric Start
-
Turn the EZ Start Dial to the “CHOKE” position.
-
Press and hold ignition switch.
-
Turn the EZ Start Dial to the “RUN” position.
-
Manual Start
-
Turn the EZ Start Dial to the “CHOKE” position.
-
Pull the recoil to start the engine.
-
Turn the EZ Start Dial to the “RUN” position.
-
Starting the Engine: Propane (LPG)
-
Encender el motor: Propane (GLP) Electric Start : Propane (LPG)
-
Open the propane tank valve.
-
Turn the EZ Start Dial to the “CHOKE” position.
-
Press and hold the ignition switch to the “START” position for 3-5 seconds.
-
Turn the EZ Start Dial to the “RUN” position.
-
Press and hold the ignition switch to the “START” position.
-
Manual Start : Propane (LPG)
-
Open the propane tank valve.
-
Turn the EZ Start Dial to the “CHOKE” position.
-
Pull the recoil 3-5 times to prime the engine.
-
Turn the EZ Start Dial to the “RUN” position.
-
Pull the recoil to start the engine.
-
Plug in. ° Operation > Connecting Electrical Loads.
1•877•338•0999
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>