Senada Bikes Drifter Electric Bike Owner’s Manual

June 13, 2024
SENADA BIKES

Senada Bikes Drifter Electric Bike

Senada-Bikes-Drifter-Electric-Bike-PRODUCT

Product Information

The DRIFTER is a bike manufactured by Senada Bikes. It is an electric bike designed for recreational and commuting purposes. The bike comes with a manual control instrument that allows users to control various features and settings. The bike has a maximum load capacity of 120 KG (265 lbs) and should not be ridden with more weight than this.

Product Usage Instructions

  1. Before assembling and riding the bike, carefully read and understand the owner’s manual.
  2. If you have any questions or need assistance, contact Senada Bikes by email at contact@SenadaBikes.com.
  3. Ensure that the bike is assembled correctly according to the instructions provided in the manual. If you are unsure, it is recommended to have a certified bike mechanic check your work.
  4. Inspect the torque and security of all wheel mounting hardware upon arrival and regularly thereafter.
  5. Make sure to lubricate the rotating shaft and avoid hitting it vigorously to maintain its performance.
  6. Do not exceed the maximum load capacity of 120 KG (265 lbs) while riding the bike.
  7. After use, park the bike correctly and avoid parking in building halls, evacuation stairs, or safety exits.
  8. Follow all maintenance instructions provided in the manual.
  9. Do not copy, modify, reproduce, transmit, or publish thecontents of the manual without prior written permission from the company.
  10. Read and follow the manual carefully to avoid product damage or personal and property damage due to improper use or mistakes.
  11. Ensure you have all required and recommended safety equipment before each ride.
  12. Comply with all laws and regulations regarding the use of electric bikes in your region.
  13. If you plan to change components or attach accessories to the bike, refer to the manual for instructions or consult a certified bike mechanic.

Welcome
Thank you for purchasing DRIFTER from Senada Bikes. Please read carefully and understand this manual fully before assembling and riding your bike.
If you have questions after reading this manual, please contact us by email.
We are here to help!
Email : contact@SenadaBikes.com

Attention
Battery and Charging: Charge at 0℃~45℃(32-113℉), discharge at -20℃ 〜60℃(68-140℉), keep the battery dry. Do not put the battery in acidic or alkaline liquid. Avoid rain and keep away from fire, heat and high-temperature environments. It is strictly forbidden to connect the positive and negative poles of the battery reversely. It is strictly forbidden to damage, disassemble the battery or cause short-circuit. Please use the specific original charger for charging, with a charging time no more than 8 hours and a charging current no larger than 2A.When not in use for a long time, please store the battery in a cool and dry place, and charge the battery for 5 hours every month. The user must follow the manual instructions when charging, otherwise, the consequences will be at his own risk. Pay attention to the battery type and applicable voltage that the charger can charge, and it is strictly forbidden to mix. When charging, it should be placed in a ventilated environment. It is strictly forbidden to charge in residential buildings, enclosed spaces, or under sunshine and in high-temperature environments. When charging, plug in the battery first, then connect to power supply socket; after charge gets full, cut off the socket first, and then unplug the battery. When the green light is on, the power supply should be cut off in time, and it is forbidden to connect the charger to the AC power supply for a long time without charging. During the charging process, if the indicator light is abnormal, there is a peculiar smell, or the charger casing is overheated, stop charging immediately, and repair or replace the charger. During the use and storage of the charger, pay attention to avoid foreign objects entering, especially water or other liquids, so as to avoid a short circuit inside the charger. The charger should not be carried with the bike as much as possible. If it is necessary to carry it, it should be placed in the toolbox after the shock absorption treatment is done. Do not disassemble or replace the accessories in the charger by yourself.
Ride: Do not use it until you read the instructions carefully and understand the performance of the product; do not lend it to people who can’t manipulate the product for riding. Before riding the bicycle, check whether the brakes are working. When you brake, please activate the rear brake firstly, and then the front brake. Pay attention to the brake tightness. If the brake is too loose, use an Allen key to tighten it. Pay attention to increasing the braking distance when riding in rain or snow. Suitable age: Riding between 16 and 65 years old. Please be sure to wear a safety helmet when riding the ebike, follow the traffic rules, and do not drive on motorized lanes and roads with many pedestrians. Please check the tire pressure before riding. The recommended tire pressure is 35~45PSI. When riding on downhill and non-paved roads, make sure the speed do not exceed 15km/h (9.3mph). When using the motor, please be careful not to hit it vigorously and keep the rotating shaft lubricated. It is not allowed to ride with more than the maximum load of the body (the maximum load is 120 KG, 265 lbs) After use, the bike can not be parked in the building hall, evacuation stairs, safety exits, and must be parked correctly by.

Liability statement:
After riding, please store the bike in a place without sunlight and rain, not in a residential building; Regularly check the motor and brake; Regularly check bike’s screw , especially those need to be tightened, and tighten them regularly. Recommended torque: (unit: kgf. cm) Steering handlebar screws 60-80, stem screws 175 ~ 200, seat cushion screws 175 ~ 200, wheel screws 320 ~ 450; The front and rear wheels of the ebike should align with the central axis of the front fork or frame; Regularly check if there is scratches, cracks or excessive wear in tires. The inner tube and valve should be perpendicular to the wheel hub and not crooked. Damaged or excessively worn tires need to be replaced immediately, please find a professional technician to replace your tires, if your tires accidentally puncture and leak, please contact a professional technician for repair or replacement.

Maintenance:
The company reserves the right to modify and interpret the product models, specifications or related information mentioned in this manual;The functions of a specific model mentioned in this user manual are only applicable to that specific model;The product models, specifications or related information mentioned in this user manual are subject to any modification or change without prior notice;Without the prior written permission of the company, the contents of this manual may not be copied, modified, reproduced, transmitted or published in any form. Please read this manual carefully before using the product, and operate in accordance with the manual, otherwise the company will not be responsible for product damage or personal and property damage caused by improper use or mistakes

General Info

Assembly and Fit
Correct assembly and fit are essential elements of ensuring your bicycling safety, performance, and comfort. Even if you have the experience, skill, and tools to complete these essential steps before your first ride, Senada Bikes recommends having a certified, reputable bike mechanic to check your work.
NOTICE : If you do not have the experience, skills, or tools to complete assembly and fit, Senada Bikes highly recommends having a certified, reputable bike mechanic complete these procedures as well as any future adjustments or tuning.
NOTICE : A critical aspect of assembling your bike by Senada Bikes is securing the front wheel and checking the tightness of the rear wheel axle nuts. These mechanisms may become loose or unsecured during shipment or over time. The torque and security of all wheel mounting hardware should be inspected upon arrival and on a regular basis. Both wheels need to be properly secured before operating your bike.

Mandatory Equipment and Use Locations
Before all rides, ensure you have all required and recommended safety equipment and are following all laws pertaining to using an electric bike in your region.

Changing Components or Attaching Accessories
The use of non-original components or spare parts can jeopardize the safety of your ebike, void your warranty and, in some cases, cause your ebike to not conform with laws pertaining to your bike

Safety Check Before Each Ride
Always check the condition of your bike before you ride in addition to having regular maintenance performed. If you are unsure of how to conduct a complete check of the condition of your bike before every ride, you should consult a certified, reputable bike mechanic for assistance. See the Pre-Ride Safety Checklist for more information.

Electrical System
The electrical system on your ebike offers various levels of power assistance and lighting for different operating conditions and user preferences. It is critical that you familiarize yourself with all aspects of your ebike’s electrical system and check to see that it is working correctly before every ride. The front and rear brake levers contain safety power cutoff switches, which disable the hub motor’s assistance when applied, and both levers should be checked for correct operation. The throttle should provide smooth acceleration when gradually applied. If the throttle, brake lever cutoff switches, pedal assistance, or lighting are functioning abnormally, intermittently, or not working, please discontinue using your ebike immediately and contact the Senada Bikes Product Support team for assistance.

Brakes

Ensure brakes are working correctly, all braking system components are free from damage, and properly secured. When you fully squeeze the brake levers, ensure neither the front nor rear brake levers touch the handlebar. Take your bike to a certified,reputable bike mechanic to have the brakes repaired if you find a problem.

Tires and wheels

Your wheels should always spin straight and must be repaired or replaced if they wobble side to side or up and down when spinning. If your wheels become untrue or spokes loosen, which can happen with normal use, we recommend that a certified,reputable bike mechanic performs all wheel tuning and truing operations on your bike from Senada Bikes. Do not attempt to true wheels or tighten spokes unless you have adequate knowledge, tools, and experience. Ensure the tires and inner tubes are in good working condition without any visual damage and have the correct amount of air pressure. Always replace tires and inner tubes with punctures, cuts, or damage before you ride. increase tire and component wear, and make riding your bike unsafe.

Quick Release Levers
Quick release levers are located on your ebike for securing the seatpost . This provide convenience to the user since they allow the seatpost to be adjusted without tools. Since quick release levers can be loosened during transportation, or accidentally between or during rides, it is important that you regularly check to ensure these components are properly secured.

Accessories, Straps, and Hardware
Ensure all hardware is secured and all approved accessories are properly attached per the specific component manufacturer’s instructions. It is good practice to look over all hardware, straps, and accessories before each ride and
if you do discover something is wrong or find something you are not sure about, have it checked by a certified, reputable bike mechanic.

Suspension, Handlebar, Grips, and Seat Adjustments

The suspension fork on your ebike will affect the handling of the bike , you need to understand how it works before use. The suspension fork should be properly adjusted for your weight and terrain. Ensure the handlebar and handlebar stem are properly aligned, fitted to the user, and secured to their recommended torque values. Handlebar grips should not move easily on the handlebar end. Loose, worn, or damaged handlebar grips should be replaced before you ride and can be purchased from Senada Bikes. The seat and saddle tube should be properly aligned, fitted to the user, and the saddle tube quick release should be properly tightened, fully closed, and secured before riding.

Battery Charged, Secured, and Unplugged
Ensure the battery is adequately charged and operating properly. The battery gauge on the LCD display and charge status indicator on the battery should read similarly. Ensure the battery charger is unplugged from the outlet, battery, then stored in a safe location before you ride.

Product function diagram

Senada-Bikes-Drifter-Electric-Bike-FIG-
\(1\)

Function introduction

Senada-Bikes-Drifter-Electric-Bike-FIG-
\(2\)

  1. Charging: Unscrew the plastic cover on the battery (Figure 1), connect the charger to start charging, when the battery is full and the indicator light of the charger changes from red to green, it means it is fully charged.
  2. Power on: Refer to Figure 2,witch on battery; refer to Figure3, press and hold to turn on/off the power。
  3. Power display: After the power is turned on, the dashboard lights up to display the power. The power is displayed in 5 grids, corresponding to high, medium, and low power.
  4. Headlights: Refer to Figure 3, press and hold to turn on/off the headlights.
  5. Start: pedal-assisted riding, short press to adjust to 1st gear after starting, pedal the bicycle sprocket,start the power assist.If you don’t need power assistance, you can turn off the power or turn off the battery or set the meter to 0。

Product parameters

| Parameter| Standard Version
---|---|---



Outlook &Dimension

| Body Material| Aluminum Alloy
Color| Black
Unfolding Size| 1650mm580mm1160mm
Folding size| 920mm500mm800mm
Hub Form| Spoke wheel
Wheel Size| 20 inches
Packing Size| 1470mm320mm730mm




Performance Parameters

| Gross weight /Net weight| 35.7kg/29.2kg
Maximum Load| 135kg(297 lbs)
Maximum Speed| 45km/h(28mph)in US
Range| ≦30 miles(electric mode)

≈65miles(pedal assist model)

Maximum Climbing Angle| 25 degree
Proper Temperature| -10°C-45 °C (14℉-113℉)
Waterproof Level| IP54
| Battery Type| 18650 lithium ion power battery
Battery Capacity| 14ah



Electrical Specifications

| Battery Rated Voltage| 48V
---|---|---
Motor Rated Power| 500W
Motor Form| Assist mode,pure electric mode
Motor Type| 20 inches / High-speed gear / Spoke wheel brush-less motor
Motor Rated No-Load Speed| 390±10r/min
Charger Output| 54.6V    2.0A
Charger Input| 100~240V    50/60Hz    2    A
Under voltage Protection Value| 39V
Over current Protection Value| 20A±1A
Charging Time| 6-7 hours




Features

| Instrument Display| Multifunctional LCD screen
Front Lighting| YES
Braking Method| Front disc brake + Rear disc brake


Tire Specifications

| Pneumatic tires
Tire:20×4.0
Air Valve: 20×4.0, the inner tube
| | valve is AV
---|---|---
Front Fork| Suspension front fork
Gear| 7 Speeds transmission

Remarks:The factors, including battery power capacity, load, tire pressure, road conditions, chain and lubrication between wheel and axle, etc. will affect the maximum speed; the cruising distance indicated in this manual file is the test result from the riding test conducted uninterruptedly with load of 80kg(176 lbs), at the speed of 12-28mile/h for US, and on the flat and hardened road surface, from full charge to full power consumption. Driving habits, temperature, load, tire pressure, road condition and other factors will affect the actual cruising distance.

Manual control instrument

Function description:

  1. Display function
    Speed display, power assist display, power indicator, fault prompt, mileage display voltage display, single boot time, 3.75mph push assist, cruise control, brake indication, and headlight display.

  2. Control set function
    Power switch control, headlight switch control, 3.75 mph push assist setting (WALK mode), cruise control setting, 5 gear speed setting,1st speed: 12mph, 2nd speed 16 mph, 3rd gear speed 20 mph, 4th speed: 24 mph, 5th speed: 28 mph. Speed display

  3. All contents of the display screen (full display within 1s after booting)

Display content introduction

  1. Light
  2. Battery electric power display
  3. Multifunctional display area Total mileage ODO, single mileage TRIPA (unit: mile, km), current-voltage VOL, single boot time TM.
  4. power-assisted gear adjustment 0-5 digital display and gear bar display.
  5. Ebike status display area (Cruise: booster、Walk:3.75mph) push assist mode
  6. Speed display area Current speed SPEED, maximum speed MAX, average speed AVG in mph km/h. The instrument will calculate the real speed according to the wheel diameter and signal data.
  7. Status display area Instrument Status Code Meaning:
Status Code State Meaning
E00 Normal Status
E06 Battery Under voltage
E07 Motor Failure
E08 Handlebar Failure
E09 Controller Failure
E10 Communication Reception Failure

Button introduction:
The specific combination of buttons is as follows

Use Introduction button operation is divided into short press and long press.
Specific operation explanation.

Switch LCD

  1. In the off state, press and hold the button to turn it on;
  2. In the power-on state, press and hold the button to turn it off。

Change the assist gear In power-on state

  1. Short press the button to turn it on, assist gear will be + 1.
  2. Short press the button to turn it on, assist gear will be -1.

Switch speed display area content
In the power-on state, long press the and buttons at the same time to complete the display switching between the average speed, the maximum speed and the instantaneous speed.

Set/release 6Km/h (3.75mile/h)boost, cruise control, switch headlights

  1. When the bike is stationary, press and hold the button to enter the 6KM/h (3.75mile/h) boost cruise mode. Press any brake to exit this mode.
  2. When the bike is in the power-assisted running state, press and hold the button to enter the cruise control mode. Press any brake or turn the accelerator to exit cruise mode.
  3. Press and hold the button to turn the headlights on or off.

Note:

  1. Due to the upgrade of the company’s products, the display content of the product you get may be different from the manual, but it will not affect your normal use. Everything is subject to the real object, and the company reserves the right of final interpretation.
  2. The parameter settings of the instrument have been set at the factory. Please operate according to the instructions in the manual, and do not change the original settings of the instrument The company is not responsible for any abnormal function or function damage caused by not following the instructions in the manual.
  3. Do not immerse the instrument in water, or use a water jet to clean the meter. When cleaning, wipe with a soft cloth dampened with water. Do not wipe with any cleaning agent.
  4. Do not dispose of the instrument or any other E-bike accessories as resident waste. Please comply with local laws and regulations and dispose of or recycle E-bike accessories in an environmentally friendly manner.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals