NIGHT OWL DVR-BTD8-8 Wired DVR Security System Installation Guide
- June 6, 2024
- NIGHT OWL
Table of Contents
DVR-BTD8-8 Wired DVR Security System
Quick Setup GuidQeuick Setup Guide
Digital Video Recorder (DVR) Product Setup
Wired DVR Security System
Product support information can be found on the top
of your Recorder
Need Help?
Why call? Our 24/7 online support site has it all!
For system manuals, troubleshooting guides, FAQs, video tutorials and more:
1 Visit Support.NightOwlSP.com 2 Enter the Series listed on the product
support
sticker into the search bar 3 Access the support material needed
DVR Hardware Setup Video
Follow along as we guide you through the DVR’s hardware setup. Step-by-step
instructions make it even easier to connect your system! Use the QR Code for
easy access to the DVR Hardware Setup Video on Night Owl’s YouTube Channel.
For more Support Videos, go to Night Owl’s YouTube page by typing
www.youtube.com/nightowlsp into your web browser.
Night Owl Technical Support
If you require Technical Support, you should always go to
Support.NightOwlSP.com first. With 24/7 access to system manuals,
troubleshooting guides, FAQs, video tutorials, and more, you’ll have all the
support you could need.
Still need more support? Before calling Night Owl Technical Support, keep in
mind we can only provide phone support if:
Your device is running the latest firmware version. Your device is registered.
To register your device:
Download Night Owl Protect from your Smart Device’s App Store. Click “Sign Up”
to create an account.
or Go to www.no-protect.com and manually register your device. You are in
front of the device with it powered on.
Thank you for being a Night Owl Customer! Secure, Protect, Connect your world!
C M Y CM MY CY CMY K
Not Connecting to the Internet?
Night Owl strongly recommends connecting the DVR to the Internet. If you have
decided not to connect, follow the onscreen prompts within the Startup Wizard.
Please note that not connecting your DVR means:
You must manually update the device’s firmware to the latest version to
receive Technical Phone Support. The latest firmware version is available on
the device’s support page on the Night Owl Support Site.
The DVR must be registered to receive Technical Phone Support.
You cannot view your system remotely.
Resetting your password is a much longer process to ensure security.
Need More Help?
REV 210415 QSG-BTD-2217
For system manuals, troubleshooting guides, FAQs, video tutorials and more:
Please visit Support.NightOwlSP.com Enter the Series listed on the Product
Support Sticker (on top of the DVR) into the Search bar. Access the support
material needed.
What’s in the Box
DVR / Accessories
DVR
DVR Power Adapter (x1)
6 ft. HDMI (x1)
Camera / Accessories
6 ft. Ethernet (x1)
USB Mouse (x1)
Camera(s)
Camera Power Adapter(s)
(1 per 4 Cameras)
Power Splitter(s) (1 per 4 Cameras)
60 ft. Video/Power Cables
(1 per Camera)
Mounting Hardware (Varies by Model)
Items Not Included
Monitor
(Not required for Bluetooth® Setup)
RESET
LAN1 LAN2 LAN3 LAN4 WAN
Router
NOTE: If connecting to a TV or Monitor (Not Required), it must have a minimum resolution of 1080p HD. Use all of the included Night Owl accessories. Third- party accessories may not work correctly.
DISCLAIMER: The exact components of your system, images, and quantities may vary depending on your model number. While these may vary, this QSG addresses the setup of your DVR and cameras. While we make every effort to provide accurate information, inaccuracies or errors may occur. We reserve the right to make changes, corrections, and/or improvements to the information and to the products, at any time without notice.
iPhone, iPad, Mac and Mac OS X are registered trademarks of Apple Inc. Windows, Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 10 are registered trademarks of Microsoft Corporation in the United States and/or other countries.
QSG-BTD-2217.pdf 1 4/15/2021 3:47:00 PM
QSG-BTD-2217.pdf 2 4/15/2021 3:47:03 PM
Step 1: Connecting Your System
NOTE: Watch our Recorder Setup Video on YouTube.
Option 1: Easy Bluetooth® Wireless Setup
With our easy Bluetooth® wireless setup, no TV / Monitor is required. Once
your system is connected using the steps below, you can quickly finish the
setup right from the app on your Smart Device. This is the preferred setup
method for your system. Please proceed to step 1.
Option 2: Manual Setup (TV / Monitor)
While our easy Bluetooth® wireless setup is preferred, you may still want to
locally view your system from a TV / Monitor. The choice is yours based on
your setup needs. If you want to connect a TV / Monitor, complete the two
steps below then continue to finish connecting your system.
a
b
HDMI
USB
NOTE: You may still use a TV / Monitor, it is just not required for initial setup.
Plug one end of the included HDMI cable into the HDMI port on the back of the
DVR. Plug the other end of the cable into your TV or Monitor.
NOTE: To view cameras, TV or Monitor must be tuned to the same input the HDMI
is plugged into.
Plug the USB mouse into the USB port on the back of the DVR.
Follow The Steps Below to Continue Setting up your System For Both Options
1
2
63
4
ROUTER (NOT INCLUDED)
FROM CAMERA
VIDEO / POWER CABLE
To CAMERA
ETHERNET
ETHERNET
RESET
LAN1 LAN2 LAN3 LAN4 WAN
To CAMERA
Plug one end of the included Ethernet cable into the LAN port on the back of the DVR.
NOTE: Night Owl recommends connecting to the Internet for the best user experience.
5
POWER CABLE CONNECTORS
POWER SPLITTER CONNECTORS
Plug the other end of the Ethernet cable into a port on the back of your
router or modem.
NOTE: As long as your DVR is hardwired using Ethernet cabling, you can connect
to any working network access point. See your product manual for more details.
6
CAMERA POWER ADAPTER
Connect the end of the camera’s cable to the end of a video / power cable
labeled TO CAMERA ONLY.
BEFORE installing, connect and test each camera locally to confirm they
function properly.
7
Connect the video / power cable labeled TO DVR ONLY to an open video input on
the DVR.
NOTE: Make sure you twist and lock BNC connectors.
8
C
M
Y
CM
MY
CY
Connect the red female power leads of the video / power
CMY
cables to the male power splitter ends.
K
POWER SPLITTER
SURGE PROTECTOR (NOT INCLUDED)
Connect the power splitter to the camera power adapter and plug the adapter into a surge protector or Uninterruptible Power Supply (UPS).
POWER
Connect the DVR power adapter to the Power Input on the rear of the DVR.
Step 2: Download Night Owl Protect
SURGE PROTECTOR (NOT INCLUDED)
Plug the DVR power adapter into a surge protector or Uninterruptible Power
Supply (UPS). Some systems beep upon booting up.
NOTE: Make sure the UPS or surge protector is switched ON.
2a
If you’re a First Time User, download Night Owl Protect from the App Store or Google Play Store onto your Smart
Device. If you already have an account skip to Step 3.
NOTE: Setup is the same for Smartphone and Tablet.
2b Create and verify your Night Owl Protect account. Proceed to Step 3.
Step 3: System Configuration
Now that your system’s hardware is connected and you have the app setup on your Smart Device, it is time to configure your system. Based on whether you chose Option 1: Easy Bluetooth® Wireless Setup or Option 2: Manual Setup (TV / Monitor), follow the steps below.
Option 1: Easy Bluetooth® Wireless Setup
NOTE: If you have a TV / Monitor connected, you will see setup information
appear on the screen as you complete the Bluetooth® setup. A TV / Monitor is
not required for this setup, but can be used for viewing.
1
Log in to the app. If your device’s Bluetooth® is not enabled, you will be asked to allow access.
2
The app will now use Bluetooth® to find the DVR. Tap “Continue” to add the DVR to your Night Owl
Protect account.
Option 2: Manual Setup (TV / Monitor)
NOTE: Connecting your system and using the Night Owl Protect App is preferred
and offers added security benefits and convenience to your mobile lifestyle.
We strongly recommend you connect your DVR to the Internet to search for the latest firmware. Keeping your firmware updated is vital for the overall health of your system. If you are NOT connecting your DVR to the Internet, please manually upgrade the firmware and register your device.
1
If you have not already done so, connect your DVR to a TV / Monitor using the provided HDMI cable. Follow the steps in Connecting Your System.
3 Take a moment to name your recorder.
2
You will now begin the Startup Wizard. When you get to the following screen,
click “Manual Setup (not recommended).”
4
The app will now pair to the DVR. Once finished, complete the remainder of the Startup Wizard right
from the app and begin viewing your cameras.
NOTE: If the DVR is not connected to the Internet, you will not be able to live view the cameras from the app.
3
Proceed through the rest of the Startup Wizard to finish setup. Once complete,
click on “Go to Live View” to begin
viewing your cameras.
Continued on Other Side
FCC Statement This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: -Reorient or relocate
the receiving antenna. -Increase the separation between the equipment and
receiver. -Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. -Consult the dealer or an experienced
radio/TV technician for help. To assure continued compliance, any changes or
modifications not expressly approved by the party. Responsible for compliance
could void the user’s authority to operate this equipment. (Example- use only
shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement: The equipment complies with FCC Radiation
exposure limits set forth for uncontrolled enviroment. This equipment should
be installed and operated with minimum distance 20cm between the radiator and
your body.
.