URBAN factory UPB10UF JUICEE MAX Portable Power Pack Instruction Manual
- June 10, 2024
- URBAN factory
Table of Contents
URBAN factory UPB10UF JUICEE MAX Portable Power Pack
Product Information
The JUICEE max is a 10,000mAh emergency battery with a USB-C port, designed to charge multiple devices on the go. It comes with a 1x USB-C input port, 2x USB-A output ports, and a micro-USB input port. The battery can provide up to 6 charges for your devices. The power bank also features a display light that indicates the battery level.
The JUICEE max is manufactured by Urban Factory and complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The product conforms to the European Low Voltage Directive (Directive LVD 2014/35/EU), EMC (Directive 2014/30/EU), and Regulation 1907/2006 (REACH).
Charging the Power Bank
- Connect the USB-A cable port to a charging device.
- Connect the other end of the cable to the USB-C or the micro-USB input connector of the power bank.
- The power bank will automatically start charging and the current power level will be displayed on the display light.
Note: The power bank is fully charged when all the lights are ON.
Charging Your Devices
- Connect your device to the power bank using an appropriate cable.
- The power bank will automatically start discharging and the power indicator will turn off after 5 seconds.
Note: The power bank can provide up to 6 charges for your devices.
Warnings
Do not expose the JUICEE max to water or other liquids. Keep the product away from fire and heat sources. Do not disassemble or modify the product. Use only the provided cables and connectors. For any inquiries, contact Urban Factory at info@urban-factory.com or call +33 (0)1 45 78 45 78.
Features
Specifications
- Battery type: A grade high-energy density Polymer cell
- Capacity: 10 000mAh – 37Wh
- USB-C Input: DC 5V 2.0A
- USB-A Output (1 & 2): DC 5V 2.0A
- Micro-USB Input: DC 5V 2.0A
Into the box
- 1* Powerbank
- 1*Micro-USB / USB-A Cable 30CM
- 1*User Guide
Display light
- Indicator light
- 4 lights on the device show the capacity
- Flashing
- Switch off
- Lighting
- The power bank will check and show the percentage of capacity when powered on.
Charging instructions
Charge the Powerbank
- Connect the USB-A cable port to a charging device and the other end to the USB-C or the Micro-USB input connector.
- After connecting, the power bank will automatically be charged and the current power level on the battery status indicator will flash.
Storage
If you don’t use the battery
- Recharge the battery to half capacity and keep it in a cool and dry place
- It is recommended to perform a complete charging and discharging every 3 months.
Safety instruction
- Do not throw the battery into fire, it might burn, explode or release toxic gas.
- Do not connect positive and negative poles.
- Do not store the battery with other metallic materials
- Do not open the battery and do not drop it into water, the battery needs to keep dry.
- Stop using the battery if leaking, the heating itself is out of shape, smells, or any abnormal phenomenon.
- Use the battery at room temperature between 10°C and 30°C
- Do not charge with a noncertified device
Charging instructions
How to use the battery
- Connect your device to the battery with the appropriate cable. The battery will discharge automatically and the power indicator will turn off after 5s.
- USB Output: Charge your smartphone or tablet
- Micro-USB or USB-C Input: Charge your Powerbank
Declaration of Conformity
URBAN FACTORY hereby declares that the UPB10UF power bank complies with the essential requirements and other relevant provisions of Directive 2014/53 / EU. Headquarters: Urban Factory, 57 rue de la Convention 75015 Paris FRANCE Product Name: JUICEE MAX: USB-C / USB-A POWERBANK 10.000MAH Reference: UPB10UF This statement relates is in conformity with the following European and international normative document(s). European Low Voltage Directive (Directive LVD 2014/35/EU )
- Regulation 1907/2006 (REACH)
- EMC (Directive 2014/30/EU)
- EN 55032 : 2015 + A1: 2020
- EN 55035 : 2017 + A11: 2020
- EN 61000-3-2: 2019; EN 61000-3-3: 2013 + A1: 2019
Warning
- Do not charge the battery and your external device at the same time.
- Do not let cables be connected to the USB outputs if the battery is not in use.
- If your device required a higher voltage than the battery, your device might not charge or not fully charge
- If your device required a lower voltage than the battery, the battery might overcharge or damage your device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>