MARMITEK Push LO WHT Smart Zigbee Switch User Guide

: June 5, 2024
: MARMITEK

Table of Contents

MARMITEK Push LO WHT Smart Zigbee Switch
Package content
Safety Instructions
Requirements
Technical specifications
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MARMITEK Push LO WHT Smart Zigbee Switch

Package content

smart switch
CR2430 battery
3M adhesive tape
quick guide

This product requires a Zigbee gateway (sold separately).

Safety Instructions

Please read these instructions thoroughly before you use the device and keep them for future reference. Only for indoor use.

Do not expose the product to extremely high or low temperatures, strong light sources or direct sunlight.
This product is not a toy. Keep out of reach of children.
Dispose of batteries as chemical waste. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion.
Repairs or service should only be performed by qualified personnel.

Requirements

This product requires a Smart me Zigbee Gateway (sold separately) that is connected to the Internet. Follow the instructions for the Smart me Gateway to add it.

Installation of the Smart me app

Download and install the Marmitek Smart me app from the Apple app store or the Google Play store.
Launch the Smart me app after installation is completed. Follow the instructions and register for a new account.

Installation of the Push LO

Open the Push LO housing by sliding the front to the left and pull the plastic battery strip to activate the battery.
The indicator light should start flashing rapidly. If the light does not blink, press push button 1 for 10 seconds until it starts to blink.
Launch the Smart my app from your smartphone or tablet.
Select the Smart me Zigbee Gateway.
Click on the + (at the bottom of the screen) to add a new product, confirm that the indicator light is flashing quickly and follow the instructions.
Press Help button during installation for more information or when installation fails.

Notes for using the product

After the installation is completed you can configure the Push LO by using the app.
Check our website www.marmitek.com for more details and how to use the Smart me products.

Technical specifications

MARMITEK Push LO WHT Smart Zigbee Switch
1

Triggered action One click, double click, long press 5s
Battery life 50.000 clicks – 2 years @ 30 per day
Wireless technology Zigbee 3.0
Operating range up to 30 meters in open area
Power Battery CR2430
Standby current 20μA
Dimensions (h x w x d) 86 x 86 x 13 mm
IP code 20 (not dust proof, not waterproof)

Declaration of Conformity

Hereby, Marmitek BV, declares that the Push LO is in compliance with the essential requirements of the 2014/53/EU Directives. Full Declaration of Conformity is available at www.marmitek.com/en/declarations-of- conformity/ More detailed user guide and instructions are available on our website at www.marmitek.com