ZALMAN S5 ATX Mid Tower Computer Case User Manual
- June 5, 2024
- ZALMAN
Table of Contents
- Precautions
- Specifications
- Accessories
- I/O Ports
- | Part| #| Part| #| Part| #| Part
- LED Control Button (Side)
- Removing the side panels
- Removing the front panel
- Mounting the motherboard
- Mounting the PSU
- Mounting the PCI-E(VGA) card
- Mounting the 3.5″ and 2.5″ SSD / HDD
- Mounting the 2.5″ SSD / HDD
- Mounting the radiator
- Fans Included / Specifications
- Mounting the fans
- Mounting the radiator
- I/O Connectors
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZALMAN S5 ATX Mid Tower Computer Case User Manual
Precautions
-
Read this manual carefully before installing.
-
Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
-
Wear gloves to prevent accidents when installing the product.
-
Severe damage may occur when mounting the system, so do not apply excessive force.
-
Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
-
Be careful not to block the ventilation hole of the product when using the system.
-
Avoid locations with direct sunlight, water, moisture, oil, and excessive dust.
Store and use the product in a well-ventilated location. -
Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
-
Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object.
-
Store and use the product out of children’s reach.
-
Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
-
The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.
Specifications
Model | S5 |
---|---|
Case Form Factor | ATX Mid-Tower |
Dimensions | 395.5(D) x 212(W) x 465(H)mm |
Weight | 5.8kg |
Case Materials | Steel, Plastic, Tempered Glass |
Motherboard Support | ATX / mATX / Mini-ITX |
Maximum VGA Length | 340mm |
Maximum CPU Cooler Height | 160mm |
Maximum PSU Length | 190mm |
PCI Expansion Slots | 7 |
Drive Bays | 2 x Combo(3.5” or 2.5”), 4 x 2.5” |
Fan Support
| Top| 2 x 120mm, 2 x 140mm
Front| 3 x 120mm
Rear| 1 x 120mm
Bottom| 2 x 120mm
Pre-Installed Fan(s)| Front| 1 x 120mm
Rear| 1 x 120mm (with ARGB LED Effect)
Radiator Support| Top| 240mm (RAM 35mm Under)
Side| 240mm (Cooling Guide)
I/O Ports| 1 x Headphone, 1 x Mic, 2 x USB 2.0, 1 x USB 3.0, Reset
Button, Power Button, LED Control Button(Side)
Accessories
User’s Manual
Glass Cleaner
Buzzer
PCI Slot Covers
Cable Ties x 5
Motherboard Standoffs x 3
Thumm Screws x 2
HDD Screws x 20
SSD / MB Screws x 25
PSU / VGA Screws x 6
Cooler Guide to Chassis (Front)
Cooler Guide to Chassis (Rear) Screw x 2
Cooler Guide Fan+Radiator Screw x 8
I/O Ports
| Part| #| Part| #| Part| #| Part
---|---|---|---|---|---|---|---
ⓐ| Power Button| ⓑ| Reset Button| ⓒ| HDD / Power LED| ⓓ| Microphone Jack
ⓔ| Headphone Jack| ⓕ| USB 2.0 Ports| ⓖ| USB 3.0 Port| ⓗ| LED Control Button
LED Control Button (Side)
Removing the side panels
-
Tempered Glass
-
Steel Panel
Removing the front panel
Mounting the motherboard
Motherboard size
-
ATX
-
mATX
-
Mini-ITX
Mounting the PSU
Mounting the PCI-E(VGA) card
Mounting the 3.5″ and 2.5″ SSD / HDD
- HDD
HDD Screws
- SSD
SSD / MB Screws
Mounting the 2.5″ SSD / HDD
Mounting the radiator
-
Top radiator
-
Front radiator
Fans Included / Specifications
Mounting the fans
-
Mounting the top fans
-
Mounting the front fans
-
Mounting the bottom fans
Mounting the radiator
I/O Connectors
HDD LED
Reset
Power LED
Power
HD Audio
USB 3.0
USB 2.0
References
- zalman.com
- ANDPRO.RU - интернет магазин компьютерной и офисной техники с выгодными ценами и доставкой
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>