GLOBAL INDUSTRIAL 412597 Digital Crane Scale With Remote User Manual

GLOBAL INDUSTRIAL 412597 Digital Crane Scale With Remote

Instruction

Technical parameter

• Accuracy class                                       II
• Tare range                                            100% max. capacity
• Initial zero range                                  +10% max. capacity
• Manually zero range                            +2% max. capacity
• Operation temperature& humidity      14-104°F: s90%Relative Humidity (RH)
• Storage temperature                            40-158°F

Battery instructions

The crane scale uses a 6v/4.5Ah rechargeable battery and lasts for about 80-150 hours. The battery charging port and battery indicator are on the back of the crane scale. The scale fully charges within 8-12 hours. The battery indicator turns from yellow to green when fully charged.

Referenced dimensions

Model No.|

Product Description

| Maximum

Capacity (lbs.)

| Division (lbs./kgs )| Size LxWxH (inches)| Weight
---|---|---|---|---|---

412604

| LED Digital Crane Scale With Remote

500lb x 0.2lb

|

550

|

0.2/0.

|

8.5”x 5.75”x15.16”

|

10.14

412597

| LED Digital Crane Scale With Remote

1,000 lb x 0.2 lb

|

1100

|

0.2/0.1

|

8.5”x 5.75”x15.16”

|

10.14

412598

| LED Digital Crane

Scale With Remote 3,000lb x 1lb

|

3300

|

1/

|

8.5”x 5.75”x17.13”

|

15.43

412605

| LCD Digital Crane

Scale with Remote, 3,000 lb x 1 lb

|

3300

|

1/

|

8.5”x 5.75”x17.13”

|

15.43

Operation Instructions

• Power on
  Press the power button for 1 second.

• Power off
  Press the power button . The scale will turn off automatically if not used for 30 minutes.

• Zero
  Press the zero button to zero the scale.

• Tare
  Press the tare button to enter the net weight mode. The new net weight will display as zero. Press the tare button again to return to the gross weight mod and display the gross weight.

• Hold
  Press the hold button to keep the current weight on the display. Press the hold button again to stop holding the weight on the display. If an object is blocking the display while it is weighed, this function can help you view the object’s weight after it’s removed.

Advanced operation

2nd Mode

Some buttons have a 2nd function. Press the 2nd button then press a different button to use its 2nd function. [2nd] will be displayed on the screen when the 2nd button is activated. Press the power button to exit.

Accumulation function

Load a weight on the scale until it is stable. Press the accumulation button to add the current weight to an accumulative total. The display will read [ ACC ]. If the max weight has been reached, no more weight measurements can be added and the display will read [noACC]. Press the delete button to remove the last added weight from the accumulated total. The display will read [DEL] when the last weight was removed If there is no weight to remove, the display will read [noDEL]. Press to see the number of weights added to the accumulated total displayed as [n*** ]. Then the total accumulated weight will be shown for 3 seconds before returning to the weighing screen. Press the [2nd] button then the delete button to clear all the accumulation data. The display will read [CLEAR] to confirm all the weights were deleted.

Weight display

Press to save the current weight value. [STORE] will be displayed when the weight is saved. Press to see the last weird saved, [LAST0]. Press or to look through the other saved weights. The most recent weight saves as 0 and the first weight saved as 9. Press to display the corresponding weight for 2 seconds. The display will return back to weighing mode.

Switching between lbs./kg

Press the [2nd] button then press to covert the weight unit between lbs. and kg.

Preset tare weight

Press the [2nd] button then press . The display will read [00000]. Use these keys to input a tare weight value. Then press to confirm the input value. The crane scale will enter the net weight mode.

Parameter setting

Press the [2nd] button then press to adjust the following settings: adjust division, delay automatic off, delay idle, filter intensity, display brightness, zero range, stable intensity, hold mode, warning tone, kg/lb conversion. After each operation, press to confirm. Press to exit.

0.05 = 0.05kg/lb

0.1 = 0.1kg/lb

0.2 = 0.2kg/lb

0.5 = 0.5kg/lb

1    = 1kg/lb

2    = 2kg/lb

| 1
Automatic power off| OFF| 00 = close this function 10 = 10 minutes delay

30 = 30 minutes delay

60 = 60 minutes delay

90 = 90 minutes delay

| 10
Idle mode 1]| IDL| 00 = close this function 10 = 10 minutes delay

30 = 30 minutes delay

60 = 60 minutes delay

90 = 90 minutes delay

| 30
Kg/lb

conversion

| UNS| 0 = kg/lb conversion off

1= kg/lb conversion on

| 1
Content| Display| Parameter instruction| Default value
---|---|---|---
Hold mode| HOLD| 0 =close hold function 1 =Peak hold

2 =Data Hold

3 =Auto Hold

4 =Animal scale function

| 2
Zero range| ZERO| 0=close manually zero setting and Initial zero range

1=Initial zero range±10% manually zero range±2%

2= Initial zero range 100%

manually zero range 100%

| 1
Filter intensity| FIL| 0=close the function 1=weak

2=moderate

3=strong

| 2
Stable intensity| STB| 0=weak 1=moderate

2=strong

| 1
Warning tone| BEEP| 0  close warning tone

1  open warning tone

| 1
Display brightness| LEDb| 1=light

2= moderate 3=dark

| 1
Zero track speed| ZTS| 0= no zero tracking 1=±0.5d/s

2=±1d/s

3=±2d/s

4=±5d/s

| 1

Battery power level checking

Press the [2nd] button then press to see the battery power level displayed in this format [U 6.**]. The display returns to weighing mode after 2 seconds.

Internal code checking

Press the [2nd] button then press to display the internal code for Maintenance and debugging. Press the [2nd] button then press to return to the weighing mode.

Troubleshooting Display Codes

the zero button.

uuuuuu| Overload.| Reduce the weight.
nnnnnn| Weight measured is lower than

the minimum value or the scale is moving.

| Ensure the scale is not moving.
2nd| 2nd button pressed.| First press the 2nd button then press another button to use its 2nd function. Press the power button to cancel.

Press the 2nd button twice to enter the

calibration mode.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>