ION Pickup Bluetooth Speaker User Guide

: June 5, 2024
: ION

Table of Contents

Box Contents
Outdoor Use and Care
Features
- Top Panel
Pairing a Bluetooth Device
Technical Specifications
Safety Information
- Safety Notices
Trademarks and Licenses
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ION Pickup Bluetooth Speaker

For the full User Guide and the latest information about this product, visit ionaudio.com.
For additional product support, visitionaudio.com/support.
For complete warranty information: visitionaudio.com/warranty.

Box Contents

Pickup
Quickstart Guide
AC Power Cable (6 ft ± 0.10 ft / 183 cm ± 3 cm)
Microphone with Cable (8 ft / 250 cm)
DC 12V Power Cable (10 ft ± 0.13 ft / 306 cm ± 4 cm)
1/8″ (3.5 mm) Stereo Audio Cable (2 ft / 61 cm)

Outdoor Use and Care

North America: Do not use Pickup with an IEC input cable rated for less than 15 A.

Though Pickup is water-resistant and able to tolerate splashing water, please review the tips below to get the best performance from Pickup: Pickup must only be used outdoors with power outlets or extension cords that are rated for outdoor use. Bring Pickup indoors during extreme weather. Please do not place Pickup in standing water. Please do not connect the power cable to Pickup in a wet environment. Make sure the power input, power cable, and power outlet are all completely dry before making any connections.
WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a dry place where they will not be affected by water and cause a risk of electric shock.

Features

Top Panel

Power Button: Turns Pickup on or off. Please note that while Pickup is connected to a power source, it does not need to be powered on to charge the battery. When the power is on, the display will show the power indicator.
Bluetooth Button: Press the Bluetooth button to disconnect a paired Bluetooth device and enter pairing mode to connect to another Bluetooth device.
Light Mode Button: Press this button to select how the lights on the front panel function:
Radio Selector: This button sets the Radio to AM, FM, or turns the radio off.
AM/FM Presets: Store a favorite radio station and quickly tune to a preset radio station. There are 6 numeric positions to store AM band presets and 6 numeric positions to store FM band presets. To add a preset:
i.Select either the AM or FM band and then use the Tune/Track Buttons to select the desired radio station.
ii.Press and hold a numeric preset button to assign the current station to that preset number. The display will show “SAVE” to show the station has been saved. To use an added preset, tap a preset number once lightly to go to the stored radio station.
Tune/Track Buttons: Tap these buttons to tune in a radio station or go to the previous/ next track on a Bluetooth connected device. To “seek” (jump to the next clear station), hold either button down for a few seconds until it starts to seek a station. The unit will remember the last station it was on and start at that station when powered off and on again.
Play/Pause: Press to play or pause a track from a connected Bluetooth device.
Display: Displays the current radio station, battery status, and Bluetooth status.
Main Volume Control: This adjusts the speaker’s main mix volume, which includes the Microphone Input, Auxiliary Input, Radio, and the audio of a paired Bluetooth device.
Microphone Volume Control: Adjusts the volume of a microphone plugged into the Mic Input (13).
Link Output: Connect two or more Pickup speakers together using a 1/8″ (3.5 mm) stereo aux cable from the Link Output of one Pickup to the Aux Input of the second Pickup.
Auxiliary Input: This stereo 1/8″ (3.5 mm) input can be used to connect a CD player, MP3 player, or other audio source.
Microphone Input: Connect a microphone with a 1/4″ (6.35 mm) cable here; adjust the Mic Volume (10), and speak into the mic to hear your voice through Pickup’s speaker.
USB Charging Ports: Connect your device’s charge cable here to charge it. USB charging only functions when the unit’s power is turned on.
N ote: To charge smartphones and tablets faster, put the device’s screen to sleep.
**Rear Panel

**

Power Cable Input (IEC): Insert the included power cable here to charge the unit. Please note that when the power cable is connected, the battery will still charge while the unit is in use.
Fuse (IEC): If the unit’s fuse is broken, lift this tab to replace the fuse. Replace it with a fuse with an appropriate rating. Using a fuse with an incorrect rating can damage the unit and/or fuse.
Power Cable Input (DC): Insert the included 12 VDC power cable here to power Pickup from a vehicle’s 12 V power outlet.
Fuse (DC): If the unit’s fuse is broken, use a screwdriver or other tool to lift this tab to replace the fuse. Replace it with a fuse with an appropriate rating. Using a fuse with an incorrect rating can damage the unit and/or fuse.

Pairing a Bluetooth Device

Turn your Bluetooth device on.
Power on Pickup. If you have previously connected to another Bluetooth device, Pickup will reconnect. To disconnect pairing if the
Bluetooth icon is lit solid, press and release the Bluetooth button.
Navigate to your Bluetooth device’s setup screen, find “Pickup” and connect.
Note: If your Bluetooth device prompts for a pairing code, enter “0000”.
To disconnect pairing while the Bluetooth icon is lit solid, press and release the Bluetooth button.

Technical Specifications

Output Power: 220 W (peak)
Drivers: 1 x 8″ (203.2 mm), 1 x 3″ (76.2 mm)
Frequency Response: 35 Hz 15 kHz
Bluetooth:
Profile: A2DP, AVRCP
Range: Up to 100 ft. (30 m) from source device. (Bluetooth range is affected by walls, obstructions, and movement. For optimal performance, place the product it is unobstructed by walls, furniture, etc.)
Linked Range: Up to 65.6 ft. (20 m) between speakers
Net Weight (Speaker only): 25.8 lbs / 11.7 kg
Water Resistance Class: IPX4
Battery: Sealed lead-acid
Battery Life: Up to 75 hours (Battery life may vary based on temperature, age, and volume use.)
Recharge Time: Up to 12 Hours
Power Input Range: AC Power Cable: 100-240V~, 50/60 Hz, 100W DC Power Cable: 12 VDC, 10A, center-positive
Dimensions (WxDxH): 10.98 x 17.99 x 18.11 in / 279 x 457 x 460 mm
Specifications are subject to change without notice.

Safety Information

Important Safety Instructions

Read these instructions. Keep these instructions. Heed all warnings. Follow all Instructions.
Do not use this apparatus near water.
Do not block any ventilation openings (if applicable). Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.
Do not defeat the safety purpose of the polarized or grounding-type plug (if applicable). A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachment/accessories specified by the manufacturer.
Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus (if applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.
Power Sources (if applicable): This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposed to excessive heat such as sunshine, fire, etc.
(If applicable) Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Warning (if applicable): Provide an earthing connection before the mains plug is connected to the mains. When disconnecting the earthing connection, be sure to disconnect it after pulling the mains plug out from the mains.
For Class II apparatus only (if applicable): This symbol means the equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
Class II Wiring (if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with “Class II Wiring” requires Class II wiring installed by an instructed person or the use of ready-made leads or cords.
This apparatus is for professional use only. Intended operational climate: moderate.
(If applicable) When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.
Warning (if applicable): Excessive sound pressure (high volumes) from headphones can cause hearing loss.
Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.
Warning (if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to constitute a risk of electric shock.
Minimum distances 10 mm around the apparatus for sufficient ventilation.

Safety Notices

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un- insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (a) reorient or relocate the receiving antenna; (b) move this unit; (c) increase the separation between the equipment and receiver; (d) connect the equipment into an outlet on a circuit different from that to which the receiver is connected; (e) be sure that all cables are properly shielded, using a choke or ferrite where appropriate; (f) consult the dealer or an experienced radio/television technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
If apparatus contains a coin/button-cell battery: Warning: Do not ingest the battery–chemical burn hazard. The remote control supplied with this product contains a coin/button-cell battery. If the coin/button-cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. Tell others about the risk associated with button batteries and how to keep their children safe. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.

Disposal of Batteries (if applicable):

Never dispose of any types of batteries in fire or near excessive heat or direct sunlight. Overheated batteries can rupture or explode.
If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc.
Alkaline batteries & lithium button cell batteries: You can safely dispose of alkaline and lithium button cell batteries with normal household waste. They do not pose a health or environmental risk during normal use or disposal. (Alkaline batteries are composed primarily of common metals like steel, zinc, and manganese.) Do not dispose of large amounts of alkaline or lithium button cell batteries in a group. Used batteries are often not completely “dead.” Grouping them together can bring these “live” batteries into contact with one another, creating safety risks. To avoid this, insulate each battery with tape or other nonconductive material to ensure it does not discharge. Proven cost-effective and environmentally safe recycling processes are not yet universally available for alkaline and lithium button cell batteries. Some communities offer recycling or collection of these batteries. For more information, refer to your local ordinances or contact your local government.
Lead-acid batteries: Dispose of lead-acid batteries by bringing them to an electronic waste center or recycling center, or dispose of them in accordance with your local ordinances. (Rechargeable lead-acid batteries are the same type used in automobiles and should be disposed of in a similar fashion.)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development (ISED) Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20 cm between the radiator & your body.

Service Instructions

Disconnect power cord before servicing.
Replace critical components only with factory parts or recommended equivalents.
For AC line powered units: Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades to all exposed metal parts. The resistance should be more than 2,000,000 ohms.

Trademarks and Licenses

ION Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play are registered trademarks of Google Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. All other product names, company names, trademarks, or trade names are those of their respective owners.