Baseus BS-PC002 Brilliance Detachable Keyboard Case User Manual

: June 5, 2024
: Baseus

Table of Contents

Instructions
Keyboard Indicators
Battery Charging
Energy-Saving Sleep Mode
Wireless Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Baseus BS-PC002 Brilliance Detachable Keyboard Case User Manual

Please read this user manual carefully before use and keep for future reference.

Instructions

Place the power switch on the keyboard to the ON position. The “Power” indicator lights up for 5 seconds and then turns off, indicating that the wireless keyboard is turned on.
Press “Connect” to enable wireless connection, with the wireless indicator flashing.
Turn on tablet wireless, search or manually enter the keyboard name “Baseus Keyboard Lite”, and click “Connect”.
After successful pairing, the screen shows successful connection and the keyboard wireless indicator turns off.
Press the FN and Windows, iOS or Android button at the same time to switch systems.

Keyboard Indicators

CAPS indicator: indicates the state of the CapsLock of the keyboard. When the keyboard is connected to a tablet, press the CapsLock key of the keyboard, CAPS indicator turns blue and input characters are in uppercase; press the CapsLock key again, the CAPS indicator turns off and input characters are in lowercase.
Wireless indicator: click “Connect”, the wireless indicator turns blue and keeps flashing. It will stop flashing when the keyboard is successfully connected with the tablet.
Charge indicator: the indicator is in red during charging, and turns off when fully charge.
“Power” indicator: when the wireless switch is on, the power indicator is in blue and turns off in 5 seconds. When the voltage is lower than 3.5V, the “Charge” indicator flashes in blue. When the wireless keyboard stops working, the flashing blue indicator will turn off.

Battery Charging

When the battery is low, the power indicator will flash to remind you to charge.

Step 1. Insert the Type-C connector of the power cord into the Type-C port on the keyboard (pay attention to the direction).
Step 2. Connect the USB connector to a power adapter or the USB port of a computer.
Step 3. When the connection is successful, the “Charge” indicator is in red. When the keyboard is full charged, the indicator will turn off.

The lithium polymer rechargeable battery can supply power to the keyboard for several weeks (no memory effect, rechargeable at any time). When it is not in use for a long time, please turn off the power switch in order to prolong the service life of the battery.

Model No.: BS-PC002

Energy-Saving Sleep Mode

When there is no operation on the keyboard for 10 minutes, it will enter sleep mode. To activate it, just press any key and wait for 3 seconds, and then the keyboard will work normally.

Wireless Specifications

Items	Parameters
Name	Baseus Brilliance Detachable Keyboard Case
Product description	Wireless 3.0 keyboard with PCBA-TPC interface
Bspaesciciﬁcation	Compatibility

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment.

Warning
Please follow the above safety instructions otherwise it will cause fire, electric shock, damage or other damage.

Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard:Q/BASEUS 002、GB 4943.1-2011
Hotline: +86-4000-712-711
Website: www.baseus.com