dji RXD2 Ultra-Bright Remote Monitor User Guide

dji RXD2 Ultra-Bright Remote Monitor

Introduction

The Ultra-Bright Remote Monitor uses the DJITM O3 image transmission technology to establish a wireless connection to the RONINTM 4D Video Transmitter mounted on the Ronin 4D. Users can monitor the camera live view and control the camera via the monitor. The expansion plate is also supported to expand input of DC and CAN and output of HDMI and SDI. Hand grips can be mounted to the remote monitor cage on the monitor for remote control.

Diagram

1. Detachable Antennas

2. Ventilation Holes

3. 3.5mm Headphone Jack

4. microSD Card Slot
   If a microSD card is mounted, the recorded files can be stored in the microSD card. The max capacity is 512 GB.

5. HDMI Port To output the live view to other display devices.

6. USB-C Port Connect to the DJI Assistant 2 (Ronin Series) software using a USB-C cable to activate and update the device and export data.

7. Power Indicator The indicator will be solid on after powered on and it will be off when powered off. 8. Power Button Press once to power on the device. Press and hold to power it off.

8. Battery Slot To mount the battery for power supply.

9. Battery Release Button 1

10. Battery Release Button 2

11. Expansion Plate Port Cover
    The expansion plate port under the cover is used to mount the remote monitor expansion plate to expand input of DC and CAN and output of HDMI and SDI.

12. Cage
    There are 1/4″ screw holes, 1/8″ screw holes, and hand grips ports on the cage to mount the corresponding accessories.

Mounting and Removing the Battery

Activation

The monitor requires activation before using for the first time. Power on the monitor and connect it to the computer. Launch DJI Assistant 2 (Ronin Series), click the corresponding icon of the device and follow the instructions to activate the device.

Linking

Linking between the monitor and the Ronin 4D video transmitter is required before use. Make sure that the video transmitter is mounted to the Ronin 4D before linking. The monitor has two work mode: control mode and audience mode. The linking method varies depending on the work mode.

Control Mode

1. Power on the monitor. Tap to enter System Settings and then Connection Settings. Tap Device Pairing under Control Mode, set the monitor in use as RC A or RC B, and tap Connect to enter linking status.
2. In Image Transmission Settings in the Ronin 4D ultra-bright main monitor, tap Pairing to enter linking status.
3. The ultra-bright remote monitor will display connected status after linking is successful. The corresponding device A or device B status on the Ronin 4D ultra-bright main monitor will display connected.

Audience Mode

1. Enable Broadcast Mode in Image Transmission Settings in the Ronin 4D ultra-bright main monitor.
2. Power on the ultra-bright remote monitor. Tap  to enter System Settings and then Connection Settings. Tap Audience Mode and the monitor will automatically search for the devices nearby. Tap the device you want to monitor and its live view will be displayed. Tap the corresponding buttons on the right of the live view to refresh display or switch between devices.

Touchscreen Interface

The interface varies for control mode and audience mode. The following description is the interfece introduction for control mode. In audience mode, control related operations such as shooting parameters adjustment, force mobile, and LUT switch cannot be performed.

1. Battery Level and External Power Voltage

2. Remote Control Devices
   To display the connected remote control devices such as three-channel follow focus, hand grips, and master wheels.

3. HDMI Input Devices

4. Video Downlink Signal Strength and Bitrate

5. Shooting Parameters* Includes white balance, ND, angle of aperture/shutter speed (one of the two displayed by following the setting in the Ronin 4D), aperture and EI. Tap to adjust the corresponding parameter.

6. Screen Lock

7. System Settings
   Connection Settings: Switch between control mode and audience mode and link devices. General Settings: Set the screen brightness, whether to display the front sight, ratio and transparency of the safety frame. About, Help: View information such as the version and SN. Get support from video tutorials.

8. Audio Gain

9. Monitor Volume
   Listen to the audio only if an audio receiving device is connected to the 3.5mm headphone jack.

10. Record Button and Timecode
    Tap the button to start or stop shooting. Only video recording is supported.

11. LUT

12. Playback Tap to preview the pictures and videos stored in the Ronin 4D.

13. Exposure Aid/Focus Aid* False Color: When enabled, the live view will be displayed in false color. Waveform: When enabled, the bottom of the screen will display the waveform of the exposure values. Zebra: When enabled, the overexposed areas in the image will be displayed in zebra crossing. Adjust the level proportion of the zebra display using the slider under the option. Peaking: Enable the peaking display and set the display color of the color peak or the acutance percentage of the acutance peak. Depth Waveform: When enabled, the right of the screen will display the depth map of the live view in its top view. The settings mentioned above are same with the ones for the Ronin 4D ultra-bright main monitor. Refer to the Ronin 4D User Manual for details.

14. Focus Ruler

15. Safety Frame
    Users can set the ratio of the safety frame and the transparency of the area out of the frame.

• To adjust the shooting parameters, start/stop shooting, configure exposure aid/focus aid, make sure that remote control is enabled in the Ronin 4D ultra-bright main monitor.

Firmware Update

Update the monitor using the DJI Assistant 2 (Ronin Series) software.

1. Power on the device. Connect the device to the computer using a USB-C cable.
2. Launch DJI Assistant 2 (Ronin Series) and log in with a DJI account.
3. Select the device and click Firmware Update on the left side of the screen.
4. Select the firmware version.
5. The firmware will be downloaded and updated automatically.
6. The device will restart automatically after the firmware update is complete.

Specifications

Remote monitor cage excluded: 496 g
Dimensions| Remote monitor cage included: 214×52×166 mm (L×W×H)
Remote monitor cage excluded: 184×26×158 mm (L×W×H)
Screen Resolution| 1920×1200
Screen Brightness| >1000 cd/m2
Video Transmission System| O3 (OcuSync 3.0)
Live View Quality| 1080p@60fps
Max Communication Bandwidth| 40 MHz
Video                       Coding

Format

| H.264
Max Bitrate| 50 Mbps
Latency| 68 ms (1080p@60fps), 100 ms (1080p@24fps)
Operating Frequency**| 2.4000-2.4835 GHz, 5.150-5.250 GHz, 5.250-5.350 GHz, 5.470-5.725
GHz, 5.725-5.85 GHz
Transmitter                        Power (EIRP)| 2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC)
5.1 GHz & 5.2 GHz & 5.5 GHz: <26 dBm (FCC), <23 dBm (CE/SRRC/MIC)

5.8 GHz: <33 dBm (FCC), <14 dBm (CE), <23 dBm (SRRC)

Compatible Battery| DJI WB37 Intelligent Battery
Operating

Temperature

| -10° to 40° C (14° to 104° F）

** Local regulations in some countries prohibit the use of the 5.8 GHz and 5.2 GHz frequencies. In some countries, the 5.2 GHz frequency band is only allowed for indoor use.

Compliance Information

FCC Compliance Notice

Supplier’s Declaration of Conformity
Product name: DJI Ultra-Bright Remote Monitor
Model Number: RXD2
Responsible Party: DJI Technology, Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model This device complies with Part 15 of the FCC Rules. Operation is subject to the following two was tested to demonstrate complying with all applicable FCC rules and regulations.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.

ISED Compliance Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The portable device is designed to meet the requirements for exposure to radio waves established by the ISED.

No operation is permitted for the frequency “5600-5650MHz”
These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.

**5150-5350MHz

**

KCC Compliance Notice

EU Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com /euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
GB Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017.

A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-compliance

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

Brazil Warning message

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

References

• Anatel — Agência Nacional de Telecomunicações
• DJI - Official Website

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>