here JM-LL03S LTE GPS Condition Tracker User Guide
- June 5, 2024
- here
Table of Contents
here JM-LL03S LTE GPS Condition Tracker
Product overview
The LL03S HERE Advanced Tracker is using GPS, Wi-Fi and BLE positioning to accurately provide its location to HERE Tracking. The tracking device has built-in sensors for motion detection, shock detection, air pressure, temperature and humidity. Furthermore, the tracker has a built-in 10.000 mAh battery, an NFC tag and internal data storage. The tracker has standard 4G connectivity included and is IP65 dust and water-resistant.
Specification
- GSM : 850/900/1800/1900 MHz
- LTE: Cat M1/Cat NB2 GSM/GPRS
- CatM1/NB2: B1/B2/B3/ B4/B5/ B8/B12/B13/B18 B19/B20/B26/B28/B66
- TIFF (open sky) Avg. cold start: < 40sec Avg. hot start:< 1sec
- Location accuracy GPS < 50 m Wi-Fi/BLE < 10 m
- Dimensions 150 x 100 x 17 mm
- Weight 310 g
- Battery 10.000 mAh 3.7 Li-polymer battery
- Operating Temp. -20 deg °C to+ 70 deg °C
- Transmit Protocol TCP
- Internal memory 512 MB RAM
Product setup
Configuration
The tracker is already equipped with a 4G SIM card and does not need to be opened before actual use. Only required activity is to associate the tracker with the project in the HERE platform according to the procedure as described below.
- Use HERE Scanner App to read device’s unique QR code which will add the Tracker to your HERE Tracking Project or HERE scanner from Google Play Store.
- Enter the Device ID number manually into the ADD new device section in your Tracking Project. https://asset.tracking.here.com/
- Change reporting methods and frequency in the Assets/Edit asset menu as follows: Edits«
Standard part list
1 x LL03S GPS / Wi-Fi HERE Advanced Tracker options:
- USB power charger (US or EU)
- USB-C charging cable 1m (plastic)
- USB-C charging cable 1,Sm (knitted)
Pushbutton functions
Press the pushbutton on the side for the indicated seconds.
- push 1 time: battery level (green = OK)
- push 2 times: start manual ingestion
- 3 sec push: set Transport Mode (LED will turn red)
- 10 sec push: reboot to Normal Mode.
Installation recommendation
Always Check Battery status Box/parcel shipment: Insert the tracker inside the box. Pallet shipment: Insert the tracker into an envelope (or box) and tape the envelope (or box) to the pallet. Car shipment: Place the tracker inside the trunk.
Troubleshooting
Type/ Use Tracker does not send data: Check battery level and recharge with USB-C power cable. Tracker does not send data: Reboot the tracker to Normal mode asit may be in Flight Mode. Tracker battery is draining to fast: Adjust reporting methods in Device setting to lower frequency updates. Tracker is not visible in Tracker Project: Verify Device ID and QR, enter the ID manually in your Tracking Project. Support Needed: For technical help open a ticket in the HERE Customer Support Portal: https://platform.here.com or contact support@here.com
Warranty
Use of this product is subject to the warranty provided in the HERE customer agreement.
CE statement
The device is restricted to indoor use when operated in the European Community
using frequency in 5150MHz~5350MHz to reduce the potential for interference.
Restriction in BE, BG, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU,
HU, MT, NL, AT, PL, PT, RO, SI, SK, FI, SE, UK.
RF exposure statement
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human
body. To maintain compliance with RF exposure requirement, use product that
maintain a 20cm distance between the device and human body.
FCC statement
RF Exposure Information and Statement This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This device
complies with part 15 of the FCC rules and RSS-247 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: Unauthorized modifications could void the user’s authority to
operate the equipment. NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
5G WIFI statement:
The device is restricted to indoor use when operated in 5150MHz~5350MHz to
reduce the potential for interference.