lelivit 64GB Digital Voice Recorder User Manual
- June 14, 2024
- lelivit
Table of Contents
lelivit 64GB Digital Voice Recorder
Thanks for Purchasing Our Digital Voice Recorder. Customer Satisfaction Is Our Top Priority. Customer Support Email: DDJ-CS@outlook.com Please Keep This Manual For Future Reference
Overview
Package List
- 1 x Digital Voice Recorder
- 1 x Earphone
- 1 x USB Cable (for data transfer and charging)
- 1 x User Manual
Product Warranty
1 Year Warranty:
Please feel free to contact us if any issues, we would do our best to help
you. And if there is quality issue, you could contact us for a replacement or
refund. Please contact us at the following e-mail address to get the fastest
and best service response.
Customer Support Email: DDJCS@outlook.com
Product Features
- One-touch quick recording.
- Built-in high-quality speaker, capable of direct playback without headphones, which allows you to experience natural sound during playback of recordings or music files as well.
- Compatible with systems from Windows 98 and above, USB 2.0 computer connectivity for seamless voice or music file uploading and downloading.
- Voice-activated recording.
- Monitoring and segmented recording capabilities.
- Timer recording support for more efficient recording time management.
- Playback eight levels of speed adjustment available.
- A multi-functional digital product combining a recorder, MP3 player, and USB.
- Built-in lithium battery, chargeable directly via supplied USB port.
- Supports recording timestamp function. Before using recording, set the current time in the settings.
- Five recording quality options: 32Kbps,128Kbps, 512Kbps, 1024Kbps, and 1536Kbps. (The default quality is 512Kbps).
- Six sound effect modes: “normal( NOR )”、”pop( HHOP )”、”rock( ROCK )”、 “jazz ( JAZZ )”、”classic( COLAC )”、”country( TEACH )”etc.
- Support MP3 and WAV recording formats.
- High-sensitivity stereo microphone recording clear audio.
- Password protection to prevent unauthorized access and data leakage.
- Support MP3, WMA, APE, FLAC, WAV, OGG, MPC, AIFF, MS_ADPCM, and other formats of music file playback.
- File management: You can directly delete recording files on the recorder.
- It is suitable for learning and recording more efficiently with the A-B repeat function.
- Factory settings.
Important Safety Information
Do not make any adjustments and modifications that are not described in this manual. Follow all safety instructions to ensure proper operation of the device. The manufacturer and seller assume no liability for damages resulting from non-compliance with the safety instructions.
Safety instructions
- To avoid a short circuit, do not expose the product to rain or water.
- Do not expose the device to excessive heat caused by placing it on a heating device or in direct sunlight.
- Protect the cables from damage by being trapped, particularly at the plugs and where cables exit the housing.
- Do not perform any maintenance operations that are not described in this user manual. Do not disassemble the device into its component parts to carry out repairs. The device may only be repaired in authorised service centres.
- Do not use this product in areas where the use of electronic devices is prohibited, such as on airplanes.
Important
Attention! Before using the device please read this User’s Manual carefully.
The manufacturer and seller shall not be liable for any data loss due to
erroneous operation or causes of a force majeure nature. Special attention
should be given to careful operations and prepare backup of files.
Warning
- Do not drop the product itself or its accessories to avoid malfunctions.
- Do not apply excessive pressure to the LCD screen to prevent damage or screen malfunctions.
- Do not forcefully disconnect connected accessories (such as headphones, USB cables, etc.).
- Caution: The speaker of this product might be affected when near magnetic cards (such as credit cards or transportation fare cards).
- Please be informed that using this product for illegal purposes is prohibited. For example, infringing on others’ privacy or engaging in eavesdropping activities.
Instructions
Short press: Click the button.
Long press: Press and hold the button for about 3 seconds.
Quick Operation Guide
Power on: Push the Power ON/OFF switch to the “ON” position to turn on the device. Or long press【 】button to turn it on (Make sure the power switch is at the “ON” position).
Power off: Push the power ON/OFF switch to the “OFF” position to turn off the device. Or long press【 】button to turn it off, at this point, the screen displays “123, Bye Bye~~”, indicating the entry into hibernate shutdown state. If the device will not be used for a long time, please turn the power switch to the “OFF” position to prevent the battery from running out.
Start Recording: In any state of power-up, slide up the【REC】button to start recording.
Stop Recording: Short press 【 】button to pause recording during
recording, at this point, the screen displays “Pause”; Short press【 】again to
cancel the pause recording.
Save Recording: Slide down the【REC】button to save the recording file.
The screen prompts “SAVED!”. After the display, the recorder will directly
enter the playback standby mode, short press【 】button to play the recording
that was just recorded. Always slide down the the【REC】button to save the
recording file after finishing each recording.
Delete: In the playback or paused state, long press the【M】button to enter the
submenu, select “delect set” for single delete or “deal set” for delete all,
then short press the【 】button to enter the delete interface, short press
the【+】 /【-】buttons for a quick tap to select “Yes” or “No”. Selecting “Yes”
will delete the current file, while selecting “No” will cancel the deletion,
short press【 】 to confirm. Or short press the【M】button to exit and return to
the previous step.
Warning: The delete operation is a permanent delete, the file will not be recovered, Please be careful about deleting files.
Note:
- It is not recommended to delete large files (for a long time) when the battery power is very low (the battery will be exhausted).
- You can also choose to delete files in the computer.
Connecting to a computer
The device can be used as a USB mass storage to conveniently store, back up,
and move files. Link the device to a computer with a supplied USB cable, the
voice recorder can automatically be recognized as a portable device without
the need to install any software.
Note
- When the device is connected to the computer, do not press any buttons.
- It is best to use the product’s standard data cable to transfer data, not all USB charging cables can transfer data.
Transferring files from or to the device
- Connect the device to the computer as described above.
- Open File Explorer. The device is automatically displayed, similarly to a USB memory stick or card, as a mass storage device. The RECORD folder on the device contains recordings.
- Copy or move files to your computer or delete files to archive recordings and free up space on the device.
- Download the File To the Computer.
Note
- Do not disconnect the device from the computer while files are transferred from or to the device, this may damage or corrupt the files.
Disconnecting from a computer
Once file transfers are complete, make sure to safely remove the hardware and
eject the media before disconnecting.
Batteries & Charging
The device comes equipped with a built-in lithium battery. To charge the
device, use the USB cable provided. Connect to a computer, USB socket, or USB
adapter. The battery can be fully charged in 1.5 hours.
Note
- Please slide the power switch to the ON position when charging.
- Menus: While in the main standby interface, short press the【+】/【-】buttons to switch between music/record/setting.
music
In the main menu interface, select “music”, short press【 】button to enter the
submenu, short press【+】/【-】button to select submenu: playing, musiclist, short
press【 】button to confirm, short press【M】button to exit and return to the
previous step. (The following operation methods are the same)
Music playback
Download MP3 music songs: Use the supplied USB cable to connect the voice recorder and computer. Download MP3 music files or MP3 music folders directly to the root directory, and then exit the computer operation.
Play/Pause/Stop music: In the “music” mode, short press the【 】 button to enter, select “musiclist” and then short press the【 】button to choose the music to be played. Short press the【 】button to play the music, and short press the【 】button to pause playback.
Previous/Next song/Fast Forward/Rewind: In the playback or pause state, short press【+】/【-】button to select the previous/next song; Long press【+】/【-】button in the playback state to fast forward/rewind.
Volume up/Volume down: Long press the【 】button in the playback state, the volume will display in red, then short press【+】/【-】button to increase or decrease the playback sound. Short press【 】to confirm the operation.
Playmode:
When the music is playing or paused, long press the menu【M】button to enter the
submenu: reread set, play mode, EQ, velo set, label set, delect set, dele all
set.
re-read set(A-B repeat playback): Short press the【 】button to select “reread set”. Short press the【 】button once to select point A, and then short press the【 】button once again to select point B. This will enable repeat playback between the two selected time points A and B; To exit A-B repeat playback, short press the【 】button.
playmode: Short press the【 】button to select “playmode”. Choose from “normal”, “single” or “random”. Short press the【 】button to confirm and exit. Alternatively, short press the【M】button to cancel and return to the previous step (that is, the operation will be invalid).
- normal: repeat all songs in the playlist.
- single: repeat only for selected songs.
- random: the playlist will be played in random order.
EQ: Short press the【 】button to select “EQ”. Short press【+】/【-】button to select “normal “NOR”pop “HHOP” rock “ROCK” jazz “JAZZ “classic CLAC ” or “country TECH “, then short press【 】button to confirm and exit. At this time, the corresponding icon will appear in the music-playing interface.
velo set(variable speed playback): Short press the【 】button to select “velo set”. There are 14 levels of playback speed changes, ranging from – 7 to +7. Levels from 0 to -7 indicate gradually slower speeds, while levels from 0 to +7 indicate gradually faster speeds. A level of 0 represents normal playback speed. Press 【+】/【-】buttons to adjust the level. Short press the 【 】button to confirm and exit.
Note:
- This function does not apply to APE format lossless music.
label set: Short press the【 】button to select and enter “label set” , select “add”, “goto” or “delete”, short press the the【 】button to confirm and exit.
delect set, deleall set: Refer to the Quick Operation Guide
record
In the main menu interface, select “record”, short press the【 】button to enter the submenu, short press【+】/【-】buttons to select submenu: playing, rec list, rec format, vor sw, rec gain, rec part, timer rec, record led, rec monitor. Short press【 】button to confirm, short press【M】button to exit and return to the previous step. (The following operation methods are the same)
- playing: Short press the【 】button to enter the “playing”.Pause/Stop the recording file playback: Short press【 】button to pause when playing the recording file, and press again to replay.
- rec list: Select “rec list” and short press the 【 】button to enter recording files. Short press the【+】/【-】buttons to select the recording file, then short press the【 】button to confirm to play the recording file.
- rec format(rec bit rate): Short press【 】button to enter “rec format”, short press【+】/【-】button to select MP3 format (32kbps, 128kbps) or WAV format (512kbps, 1024kbps, 1536kbps), then short press the【 】button to confirm. Short press【M】button to exit and return to the previous step. The factory default is 512kbps. The parameter is the recording sampling rate. The higher the sampling rate, the better the sound effect, the greater the power consumption. The lower the sampling rate, the worse the sound effects, and the less time it takes.
- vor sw (voice-activated mode): The default setting is off mode.
- vox open: Turn on the voice-activated record function.
- vox nor: Turn off the voice-activated record function. Short press the【 】button to enter, short press【+】/【-】to select “vox nor” or “vox open”. Then short press the【 】button to confirm. Or short press 【M】button to cancel and return to the previous step.
Note:
When “vox open” is selected, while recording, if the recorded sound volume
drops below the VOR sensitivity level, the recording will automatically pause,
and the recording timer will stop. Recording will automatically resume once
the captured sound returns to its original recognition level.
- rec gain(VOR Sensitivity Level): Short press the【 】button to enter, short press the【+】/【-】buttons to select “gain 00~gain 07”, then short press the【 】button to confirm. Or short press【M】button to cancel and return to the previous step. The default value is “05”. Level 00, is the mostly dumb level, it means the mic will be less sensitive, and need a louder voice to active the recording, otherwise, the recording time does not count, and it was a paused recording. While level 07 is the most sensitive level, it means the mic is very sensitive, just a soft speaking will be captured. It will be almost continuously recording, cannot see the pause status.
- rec part(Subsection Recording): Short press the【 】button to enter “rec part”, press the 【+】/【-】button to select ” sub always “,” sub 30min “,” sub 60min ” or ” sub 90min “, press the【 】button to confirm, press the【M】button to cancel and return to the previous step (that is, the operation is invalid). The default is” sub 60min “.
Note:
The recorder will automatically save the recording file at a selected time
length and start a new recording. Unless you press the【REC】button in advance
to save.
- 30 Minutes: record each file at 30 minutes
- 60 Minutes: record each file at 1 hour.
- 90 Minutes: record each file at 90 minutes.
Timer Rec: You can customize the start and end times for recordings as needed.
Short press the【 】button to enter the “timer rec” setting interface, select “timerrecsw” and short the press【 】button to enter, then short press【+】/【-】to select “off” or “on”, short press【 】to confirm. When setting the timer recording to “on”, you need to adjust the start time and the end time. timer start: set the time when it starts auto-recording. Short press the【 】button to enter the “recording start time” setting interface, short press the【M】button to select the hour and minute position, short press the【+】/【-】button to adjust the time and minute value, short press the【 】 button to confirm the “recording start time”. timer stop: set the time when it finishes auto-recording. Short press the【 】button to enter the “recording stop time” setting interface, short press the【M】button to select the hour and minute position, short press the【+】/【-】button to adjust the time and minute value, short press the【 】 button to confirm the “recording stop time”. *Note: The timing recording time is subject to the product system time. lf it needs to be consistent with the local time, please set the system time first.
- the record led: Short press the【 】button to enter the “record led” setting interface, short press the【+】/【-】button to choose “off” or “on”, short press the【 】button to confirm. Short press the【M】button to cancel and return to the previous step (that is, the operation is invalid).
- “On”: the red light flashes during recording;
- “Off”: there is no red light during recording.
- rec monitor: When you select “on”, plug in your headphones to hear the sound you are recording. Short press the【 】button to enter the “rec monitor” setting interface, short press the【+】/【-】button to choose between”off” or “on”, short press the【 】button to confirm. Short press the【M】button to cancel and return to the previous step (that is, the operation is invalid).
on: when on, use earphones to hear what it is recording. off: turn off this function.
setting
In the main interface, select “setting”, short press【 】button to enter “setting”, short press 【 + 】 / 【 – 】 button to select the submenu: screen set, time set, language, password, space set, resume, short press【 】button to confirm, short press【M】button to exit without saving and return to the previous step. (The same method of entering submenu)
screen set
- Set the screen backlight to automatically turn off after 10, 20, or 30 seconds, or keep it always on.
time set
time mode: first select the setting “time mode”, short press【 】button to enter
the time mode setting interface, short press【 】button to enter the time format
setting interface, short press【+】/【-】buttons to select “12H” or “24H” format,
short press【 】button to confirm. time set：select “time set”, short press【
】button to enter the time setting interface. In this state, short
press【M】button to switch among the hour/minute, short press【+】/【-】buttons to
adjust the number. Short press【 】button to save the current time settings.
date set：select “date set”, short press
【 】button to enter the date setting interface. In this state, short press 【 M
】 button to switch among the year/month/day, and short press【+】/【-】buttons to
adjust the number. Short press 【 】button to save the current date settings.
language
Short press【 】button to enter the language setting interface, short press 【+】/【-】buttons to select the language you want, short press 【 】button to confirm when finished(Available in English/Japanese languages).
password
- Password off / on: Short press【 】button to enter the password setting interface, short press【+】/【-】buttons to choose off / on, then short press【 】 button to confirm.
- Password setting: You can enable or disable password protection for your device. To set a password, follow these steps:
- Select “ON” to enable password protection.
- Short press【 】button to enter the password setting mode.
- The display will show a group of “0 0 0 0” for the password combination.
- Short press【+】/【-】buttons to select numbers between 0-9, and press the 【M】button to switch among the numbers.
- Once you’ve set your desired password, press【 】button to save it. The device will prompt that the password has been saved.
Note:
If you forget your password: Enter “12 12” as the password. Short press【
】button to unlock your recorder. The device will automatically lift the
password set. You can re-enter the recorder and reset your new password.
space set
Short press【 】button to view total space and free space, short press【M】 button
to return to the settings menu.
resume
Restore Factory Settings: Short press【 】button to enter default set interface,
short press【+】/【-】buttons to select“yes”or “no”, short press 【 】button to
confirm. （If you select yes, the machine will revert to the factory state and
all files will be cleared）
Warning: Do NOT restore to factory settings unless the files have been backed up. All data on the machine will be permanently deleted and will not be recovered. Please use it with caution!!!
Troubleshooting
- When powering on, the display is incomplete or the device doesn’t turn on.
- This may be due to frequent specific operations or accidental actions causing disruption to the internal programs. A single formatting process can restore functionality. Prior to formatting, please upload any useful files stored within the device. Formatting will result in the complete deletion of all content within the device.
- Unresponsive keys when powering on.
- Upon startup, long press the【 】button until the device is fully activated before using other buttons.
- The device powers off a few seconds after being turned on or doesn’t turn on.
- Please ensure that the battery has sufficient charge.
- Why do some songs display inaccurate playtimes during playback?
- Currently, files compressed using the VBR (Variable Bit Rate) format might display inaccurate playtimes while playing, but playback itself is normal. You can resolve the playtime display issue by re-compressing the file using a fixed bit rate.
- No sound during file playback.
- The volume might be too low. Adjust the volume using the volume up and volume down buttons. It’s also possible that the file being played itself contains no audio information.
- Unresponsive key operations or abnormal display.
- Power off the device and then power it on again to allow for self-repair.
- Inaccurate time display or mismatched playback content after sudden power recovery during recording.
- This occurs due to errors during recovery, particularly in cases with a high level of fragmented memory. The device may mistake some fragments for recording files. Avoid abrupt power interruptions during recording and regularly format the memory.
- Why does available storage space decrease over time?
- Prolonged usage and deletion operations can result in memory fragmentation. By connecting to a computer, backing up data, and performing a complete format, you can reclaim all storage space.
- Why does the total memory displayed in the player not match the specified capacity?
- This is primarily because a portion of the memory is used for program storage and font libraries required for text display. Therefore, the total memory you see is slightly less than the specified capacity, and this is normal.
- Occasionally, plugging or unplugging the player causes abnormalities on the computer end.
- Cause of the issue and troubleshooting: This is mainly caused by USB disconnections during file transfers. We recommend users to avoid disconnecting during file transfers or formatting processes to prevent disruptions on the computer end.
- Some MP3 songs cannot be played properly in the player or the player cannot turn on.
- Cause of the issue and troubleshooting: Strictly speaking, MP3 refers to music files compressed using the MPEG I Layer3 standard. Most MP3 songs are in this format, although earlier there were MP3 songs compressed using the MPEG I Layer1 and MPEG I Layer2 standards. Our player supports various file formats but currently cannot be compatible with MP3 songs compressed using MPEG I Layer1 or Layer2, or a mixture of multiple standards. When encountering MP3 song formats that the player cannot support, you can choose one of the following measures to resolve the issue:
- Delete incompatible songs from the player to ensure normal operation.
- Compress the songs yourself using software, choosing the MPEG I Layer3 encoding method.
- Pressing the recording button doesn’t initiate recording, or the recording suddenly stops with the display showing “Memory Full!”
- This indicates that the internal storage is full. You need to delete unnecessary files or connect the device to a computer to back up data before deleting or formatting. This will allow you to resume recording.
- Unable to connect properly with the computer
- The computer connection cable is not properly connected.
- Use the data cable provided with the device.
Technical data
| Recording
Quality
| Recording
Mode
| 8GB| 64GB
---|---|---|---|---
MP3
Format
| 128Kbps| Binaural| 144H| 1152H
32Kbps| Binaural| 578H| 4624H
WAV
Format
| 1536Kbps| Binaural| 12H| 96H
1024Kbps| Binaural| 18H| 144H
512Kbps| Binaural| 36H| 288H
Recording Source| Built-in microphone for recording
Recording Format| WAV ， MP3
Temperature| 0 ℃ – 40 ℃
Battery| Built-in lithium battery/USB power supply
Speaker Frequency
Range
| 200Hz-10000Hz
Music Support Format| MP3(MPEG1/2/2.5 AUDIO LAYER 3)/WMA
Recording Distortion| ＜ 10% （ maximum volume ）
Bit Rate| WMA: 32~192Kbps; MP3: 8~320KBPS
Display| 0.96-inch TFT screen
USB connection| High-speed 2.0, Micro-USB
Weight| Approx. 70g
Dimensions| 92 X 25 X 12mm
Note: The above relevant data are theoretical data for reference only. Actual data may differ from theoretical data.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>