emerio FP-121933.1 Fire Place Instruction Manual
- June 6, 2024
- emerio
Table of Contents
emerio FP-121933.1 Fire Place
OVERVIEW
Instruction manual – English This product is only suitable for well-insulated spaces or occasional use.
SAFETY INSTRUCTIONS
Before use make sure to read all of the below instructions in order to avoid injury or damage, and to get the best results from the appliance. Make sure to keep this manual in a safe place. If you give or transfer this appliance to someone else make sure to also include this manual. In case of damage caused by the user failing to follow the instructions in this manual, the warranty will be void. The manufacturer/importer accepts no liability for damages caused by failure to follow the manual, negligent use, or use not in accordance with the requirements of this manual.
- Read and save these instructions. Attention: pictures in the IM are for reference only.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Children of less than 3 years should be kept away unless continuously supervised.
- Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
- CAUTION — some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- This appliance is intended to be used in households and similar applications.
- WARNING: In order to avoid overheating, do not cover the heater.
- The heater must not be located immediately below a socket outlet.
- Do not use this heater in the immediate surroundings of a bath, a shower, or a swimming pool.
- WARNING: This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own unless constant supervision is provided.
- CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Means “DO NOT COVER “.
- Before inserting the plug into the main socket, please check that the voltage and frequency comply with the specifications on the rating label.
- Always plug the appliance into an earthed plug socket.
- Disconnect the mains plug from the socket when the appliance is not in use and before cleaning.
- Ensure that the mains cable is not hungover sharp edges and keep it away from hot objects and open flames.
- Do not immerse the appliance or the mains plug in water or other liquids. There is a danger to life due to electric shock!
- To remove the plug from the plug socket, pull the plug. Do not pull the power cord.
- Do not touch the appliance if it falls into the water. Remove the plug from its socket, turn off the appliance and send it to an authorized service center for repair.
- Do not plug or unplug the appliance from the electrical outlet with a wet hand.
- Never attempt to open the housing of the appliance, or to repair the appliance yourself. This could cause electric shock.
- Never leave the appliance unattended during use.
- This appliance is not designed for commercial use.
- Do not use the appliance for other than intended use.
- Do not wind the cord around the appliance and do not bend it.
- The unit must be positioned away from flammable or easily deformable objects during use.
- Do not use the appliance outdoors.
- Never move the appliance by pulling the cord.
- Keep the appliance at least 1m from walls and any other combustible materials.
- Never use the appliance to dry clothes or any other similar items.
- This appliance must not be used with an extension lead.
PARTS DESCRIPTION
- Artificial firewood
- Front door
- Air outlet
USE
-
Plugin the appliance.
-
Open the front door. The switches are located behind the front door.
-
Select your desired working functions:
-
Switch (3a): Switch on/off the power and flame effect
Note: This switch must be in the position “I” for the unit to operate with or without heat. -
Switch (3b): Switch on/off low heat output
-
Switch (3c): Switch on/off high heat output with switch (3b).
Note: This switch cannot work separately. It must work together with switch (3b). -
Rotate the thermostat knob (1) clockwise or anticlockwise to increase or decrease your desired room temperature setting. Make sure it is set above the current room temperature. Otherwise, the appliance will not begin to heat.
-
Rotate the flame knob (2) clockwise or anticlockwise to increase or decrease the flame effect. Note: The flame effect can be operated with or without heat.
SAFETY CUT-OUT
Warning: This appliance is fitted with a built-in safety cut-out. If the cut-
out gets activated the unit stops working. Unplug the appliance from the mains
and check that the air intake area is not blocked or covered. Leave for an
hour. Reconnect and switch on the appliance.
MAINTENANCE
Before carrying out maintenance work, disconnect the appliance from the power supply!
Lamp replacement
- Loosen the nine screws that fixed the back metal cover. Take off the back metal cover.
- A G9 halogen bulb is located underneath.
- Remove the defective bulb by pulling it out of the lamp holder. (see the figure below)
- Replace with a 25W G9 halogen bulb. Take care not to touch the bulb with bare hands and ensure that the bulb is pushed in place.
- To reassemble, follow the above instructions in reverse order.
CLEANING
-
The metal parts are lacquered and can be cleaned by simply using a soft cloth. Do not use abrasive material.
-
Do not immerse the power cord or the plugin water or any liquids.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 1850W
Lighting: Max 40W G9 halogen bulb
GUARANTEE AND CUSTOMER SERVICE
Before delivery, our devices are subjected to rigorous quality control. If,
despite all care, the damage has occurred during production or transportation,
please return the device to your dealer. In addition to statutory legal
rights, the purchaser has an option to claim under the terms of the following
guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day
of sale. If you have a defective product, you can directly go back to the
point of purchase.
Defects that arise due to improper handling of the device and malfunctions due
to interventions and repairs by third parties or the fitting of non-original
parts are not covered by this guarantee. Always keep your receipt, without the
receipt you can’t claim any form of warranty. Damage caused by not following
the instruction manual will lead to a void of warranty, if this results in
inconsequential damages then we will not be liable. Neither can we hold
responsible for material damage or personal injury caused by improper use if
the instruction manual is not properly executed? Damage to accessories does
not mean free replacement of the whole appliance. In such case please contact
our service department. Broken glass or breakage of plastic parts is always
subject to a charge. Defects to consumables or parts subjected to wearing, as
well as cleaning, maintenance, replacement of said parts or shipping and
transportation costs to and from any place of repair are not covered by the
warranty and are to be paid.
ENVIRONMENT-FRIENDLY DISPOSAL
Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed of with other
household wastes. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmentally safe
recycling.
Emerio Switzerland AG
Industriestrasse 47
6300 Zug
Switzerland
ERP information (EN)
Supplier: Emerio Switzerland AG
Industriestrasse 47 6300 Zug Switzerland
Declare that the product detailed below:
Information requirements for electric local space heaters
Model identifier(s):
Item| Symbol| Value| Unit| Item| Unit
Heat output| | | | Type of heat input, for electric storage
local space heaters only (select one)
|
Nominal heat
output
| Pnom| 1.85| kW| manual heat charge control, with
integrated thermostat
| N/A
Minimum heat output
(indicative)
| Pmin| 0.925| kW| manual heat charge control with room and/or outdoor
temperature feedback| N/A
Maximum continuous heat
output
| Pmax,c| 1.85| kW| electronic heat charge control with room and/or outdoor temperature
feedback
| N/A
Auxiliary electricity
consumption
| | | | fan assisted heat output| N/A
At nominal heat
output
| elm x| 0,0| kW| Type of heat output/room temperature
control (select one)
At minimum heat
output
| Elgin| 0,0| kW| single-stage heat output and no room
temperature control
| No
In standby mode| USB| 0,0| kW| Two or more manual stages, no room
temperature control
| No
| | | | with mechanic thermostat room
temperature control
| Yes
| | | | with electronic room temperature
control
| No
| | | | electronic room temperature control
plus day timer
| No
| | | | electronic room temperature control
plus week timer
| No
| | | | Other control options (multiple selections
possible)
| | | | room temperature control, with
presence detection
| No
| | | | room temperature control, with open
window detection
| No
| | | | with distance control option| No
---|---|---|---|---|---
| | | | with adaptive start control| No
| | | | with working time limitation| No
| | | | with black bulb sensor| No
Contact details| Emerio Switzerland AG Industriestrasse 47
6300 Zug
Switzerland
Satisfies the requirement of the Council Directives:
COMMISSION REGULATION (EU) No 2015/1188 of 28 April 2015 and Amending
COMMISSION REGULATION (EU) 2016/2282 implementing Directive 2009/125/EC of the
European Parliament and of the Council with regard to ecodesign requirements
for local space heaters
Regarding information for consumers on how to install, use and maintain the
product, WEEE information, please check the instruction manual provided with
packaging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>