Kraus KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks Installation Guide

June 5, 2024
Kraus

Kraus logo INSTALLATION MANUAL
Dex™ Stainless Steel
Undermount Kitchen Sinks
KA1AS17B / KA1AS25B / KA1UD33B / KA1US17B /
KA1US21B / KA1US25B / KA1US32B / KA1US33B /
KD1US17B / KD1US25B / KD1US33B / KD1UD33B

Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:
Kraus KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
iconDO NOT RETURN TO THE STORE
Please contact our Customer Service Team at 1-800-775-0703 / customerservice@kraususa.com
Have the model number available and retain a copy of your receipt with the purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Prior to Installation:

  • Make sure that you have all the necessary parts by checking the parts list.
    If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.

  • Inspect the sink prior to installation to make sure that it has not been damaged during shipping.

  • Use the cut-out template provided by Kraus.

  • Observe all plumbing and building codes according to your state requirements.

  • Not recommended to be installed with a laminate countertop.

For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free : 800-775-0703 or customerservice@kraususa.com
The step-by-step guidelines in the installation instructions are a general reference for installing a Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring a licensed professional.

Tools you will need:

Kraus KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Tools

NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount sinks with countertop materials other than wood, marble, or granite.

Parts List

KA1AS17B

  • Cut-Out Template
  • Mounting Hardware

| KA1US32B

  • Cut-Out Template
  • Mounting Hardware
  • Strainer ST-4
  • Bottom Grid BG3017

---|---
KA1AS25B

  • Cut-Out Template
  • Mounting Hardware

| KA1US33B

  • Cut-Out Template
  • Mounting Hardware
  • Strainer ST-4
  • Bottom Grid BG3117

KA1UD33B

  • Cut-Out Template
  • Mounting Hardware
  • Strainer ST-4 x 2
  • Bottom Grid BG1517 x 2

| KD1US17B

  • Cut-Out Template
  • Mounting Hardware
  • Strainer ST-4
  • Cover Cap STC-1
  • Silicone Mitt KSM-1BLACK

KA1US17B

  • Cut-Out Template
  • Mounting Hardware
  • Strainer ST-4
  • Bottom Grid BG1517

| KD1US25B

  • Cut-Out Template
  • Mounting Hardware
  • Strainer ST-4
  • Cover Cap STC-1
  • Silicone Mitt KSM-1BLACK
  • Silicone Trivet KST-1BLACK

KA1US21B

  • Cut-Out Template
  • Mounting Hardware
  • Strainer ST-4
  • Bottom Grid BG1915

| KD1US33B

  • Cut-Out Template
  • Mounting Hardware
  • Strainer ST-4
  • Cover Cap STC-1
  • Silicone Mitt KSM-1BLACK
  • Silicone Trivet KST-1BLACK

KA1US2SB

  • Cut-Out Template
  • Mounting Hardware
  • Strainer ST-4
  • Bottom Grid BG2317

| KD1UD33B

  • Cut-Out Template
  • Mounting Hardware
  • Strainer ST-4 x2
  • Cover Cap STC-1 x2
  • Silicone Mitt KSM-1BLACK
  • Silicone Trivet KST-1BLACK

Dimensions

Kraus KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Dimensions1Kraus
KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Dimensions2Kraus
KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Dimensions3Kraus
KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Dimensions4Kraus
KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Dimensions5Kraus
KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Dimensions6

Determine Reveal Type

Use scissors to cut along the line of the paper template for your desired reveal type (Negative, Positive, or Flushed Reveal).
KRAUS Recommended Installation Type

Kraus KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Determine

Position Template

Check the cut-out template against the actual sink to ensure a properly sized cut-out.
Place the cut-out template in the desired location on the countertop.
NOTE: Make sure clearance is suitable for the backsplash, faucet, and plumbing for the sink.Kraus KA1AS17B Dex Stainless Steel Undermount Kitchen
Sinks - Template

Trace Template

Trace the template on the countertop with a pencil.Kraus KA1AS17B Dex
Stainless Steel Undermount Kitchen Sinks - Template1

Cut Countertop

Cut the opening in the countertop by carefully following the traced line.
NOTE: Please use the appropriate saw that best fits your countertop material.Kraus KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
CountertopKraus
KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Countertop1

Set up Mounting Brackets

Turn the countertop over and align the sink with the countertop. Decide the location for mounting brackets.
Mounting holes should be 1/2″ from the edge of the sink.Kraus KA1AS17B Dex
Stainless Steel Undermount Kitchen Sinks - Brackets

Drill Hole in Countertop

Drill a 3/8″ diameter x 1/2″ deep hole in the countertop.Kraus KA1AS17B Dex
Stainless Steel Undermount Kitchen Sinks - Countertop4

Install Anchors

Insert anchors into drilled holes and lightly tap with a hammer until flush.Kraus KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Anchors

Secure Sink to Countertop

Use a bead of silicone (or preferred adhesive) around the rim of the sink.
Check the alignment of the sink to the cutout in the countertop. Place sink over cutout hole and press firmly.Kraus KA1AS17B Dex Stainless Steel
Undermount Kitchen Sinks - Countertop6

Attach Mounting Hardware

  • Attach mounting hardware to secure bowl. Remove excess sealant from the inside lip.
  • Allow the sealant to set for 30 – 60 minutes.

NOTE: Use acetone or rubbing alcohol to remove any excess sealant.Kraus
KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Hardware

Install Plumbing Fixtures

  • Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer’s instructions.
  • Run water into the sink and check for leaks.
  • Note: Before installation, please check that the drain kit complies with ASME A112.18.2/CSA B125.2 and with CUPC certification.

Kraus KA1AS17B Dex Stainless Steel Undermount Kitchen Sinks -
Fixtures

Codes/Standards Applicable:

Kitchen Sink Warranty
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).
Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen Sink” in its original location.
The warranty is non-transferable.
Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user and is not transferable to a subsequent owner.
Restrictions
This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.
Kraus USA recommends that all Kraus products are installed by fully licensed and insured trade professionals with experience in the installation of bathroom and/or kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recoveries of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.
This warranty does not cover Marine or Outdoor Installation.
This warranty does not cover any free gifts included with purchase.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK and Puerto Rico shipping charges may apply). International shipping fees are not included.
Commercial Warranty
Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.
All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warranty
If you are a homeowner, please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-Free: 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an authorized partner, please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:

  1. Proof of purchase.
  2. A description of the problem.

Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance

IMPORTANT

Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registrationKraus KA1AS17B Dex Stainless Steel
Undermount Kitchen Sinks - icon50

Kraus logowww.kraususa.com
Toll-Free: 1.800.775.0703
© 2020 Kraus USA Inc.
REV. December 23, 2020

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Kraus User Manuals

Related Manuals