VonHaus 2500257 7.2V 2 in 1 Hedge & Grass Trimmer Instructions
- June 5, 2024
- vonhaus
Table of Contents
2500257/ 8100074/ 9108128
| Please read all instructions carefully before use and retain them for
future reference.
---|---
| CAUTION Sharp edges.
| Protect your eyes.
| Protect your hands.
| Maintain a safe distance from bystanders.
Please read all instructions carefully before use and retain them for future reference.
INTENDED USE Only operates the power tool/machine for its intended purpose and within the parameters specified in this manual. This power tool/machine is for domestic use only. Do not use outdoors or on wet surfaces. This power tool/machine is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless supervised or given appropriate instruction concerning the product’s use by a person responsible for their safety.
GENERAL PRECAUTION Do not allow it to be used as a toy. Children should
be supervised to ensure they do not play with the power tool/machine. If the
power tool/machine is not functioning properly, has been dropped, damaged,
left outdoors, or immersed in liquid, do not use it, contact DOMU Brands
Customer Services.
Do not use the power tool/machine if any parts appear to be faulty, missing,
or damaged. Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY Avoids body contact with earthed or grounded
surfaces such as pipes, radiators, ranges, and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded. Prevent
unintentional starting. Ensure the switch is in the off position before
connecting to the power source and/ or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the switch, or energizing
power tools that are switched on invites accidents.
Do not operate power tools in explosive atmospheres such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks that may ignite
dust or fumes. Always wear eye protection. Any power tool can throw foreign
objects into your eyes and cause permanent eye damage. Always wear safety
goggles (not glasses) that comply with ANSI safety standard Z87.1. Everyday
glasses have only impact-resistant lenses.
Do not expose power tools to rain or wet conditions. Water entering the power
tools will increase the risk of electric shock. Stay alert, watch what you are
doing, and use common sense when operating a power tool/machine.
Do not use a power tool/machine while you are tired or under the influence of
drugs, alcohol, or medication. A moment of inattention while operating a power
tool/machine may result in serious personal injury. Use personal protective
equipment. Always wear eye protection. Protective equipment such as dust
masks, non-skid safety shoes, hard hats, or hearing protection used for
appropriate conditions will reduce personal injuries. Prevent unintentional
starting. Ensure the switch is in the off-position before connecting to a
power source and/or battery pack, picking up or carrying the tool. Carrying a
power tool/machine with your finger on the switch or energizing a power
tool/machine that has the switch on invites accidents. Remove any adjusting
key or spanner before turning the power tool/machine on. A spanner or a key
left attached to a rotating part of the power tool/machine may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool/ machine in unexpected situations. Dress
appropriately.
Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry, or long hair can be caught in
moving parts. If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and properly used. The
use of dust collection can reduce dust-related hazards.
WORK AREA SAFETY Keep the work area clean and well-lit. Cluttered or dark
areas invite accidents.
Do not operate power tools/machines in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools/machines create
sparks that may ignite dust or fumes. Keep children and bystanders away while
operating a power tool/machine. Distractions can cause you to lose control.
GENERAL POWER TOOL USE AND CARE Do not force the power tool/machine. Use
the correct power tool/machine for your application. The correct power
tool/machine will do the job better and be safer at the rate at which it was
designed.
Do not use the power tool/machine if the switch does not turn on and off. Any
power tool/machine that cannot be controlled with the switch is dangerous and
must be repaired. Disconnect the plug from the power source and/or the battery
pack from the power tool/machine before making any adjustments, changing
accessories, or storing power tool/machine tools. Such preventive safety
measures reduce the risk of starting the power tool/machine accidentally.
Store idle power tool/machine out of the reach of children and do not allow
persons unfamiliar with the power tool/ machine or these instructions to
operate the power tool/ machine. Power tools/machines are dangerous in the
hands of untrained users. Maintain power tools/machines.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the power tool/machine’s operation. If
damaged, have the power tool/machines repaired before use. Many accidents are
caused by poorly maintained power tools/machines. Keep cutting tools sharp and
clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control. Use the power tool/machine
accessories and tool bits in accordance with these instructions, and take into
account the working conditions and the work to be performed. Use of the power
tool/machine for operations different from those intended could result in a
hazardous situation.
CLEANING & MAINTENANCE Never soak or immerse electrical components and or
a component that has a plug attached.
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing. Such preventive safety measures reduce the
risk of starting the power tool accidentally. Ensure the motor has fully
stopped before cleaning, clearing a blockage, checking, or carrying out any
maintenance on the tool.
Maintain your power tool. Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired by a qualified repair
person before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Regularly check external nuts and fixings to ensure vibration caused by normal
use has not begun to loosen them.
Store idle power tools out of reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the Breaker.
Locate the power tool out of reach of children, in a dry, locked unit. Make
sure that the cord is located so that it will not be stepped on, tripped over,
or otherwise subjected to damage or stress. Remove the plug from the main
socket/battery (where applicable) before carrying out any adjustment or
maintenance. Always store the power tool/machine in a dry place. If the power
cord is damaged, it must be replaced by a qualified service technician. Keep
the ventilation slots and motor housing as free of dirt and dust as possible
(where applicable).
Clean the power tool/machine by rubbing it with a clean cloth and blowing it
clean using low-pressure compressed air is recommended. Ensure you have all
the pieces listed. If you are missing any components, contact our customer
services department at hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US). DO NOT
proceed with assembly if any components are missing.
HAND-HELD HEDGE TRIMMERS
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the power tool’s operation.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
Keep hands away from the cutting area. Never reach underneath the workpiece
for any reason.
Do not insert fingers or thumb into the vicinity of the blade and blade
release switch.
TECHNICAL SPECIFICATION
Rated Voltage: 7.2V d.c 1300mAh (1500mAh US)
Charger Input: 100-240V AC ~50/60Hz
Charger Output: 9V DC 400mAh
COMPONENT LIST
1. Main Unit.
2. Angle Adjustment Button.
3. Lock-off Button
4. Power Trigger.
5. Handle.
6. Hedge Trimming Blade (with sheath).
7. Grass Trimming Blade (with sheath).
8. Main Unit Holster.| 9. Pole Lock Off Button.
10. Pole Power Trigger.
11. Height Adjustment Collar.
12. Wheels.
13. Power Connector Lead.
14. Holster Ejection Button.
15. Charger (not pictured).
---|---
COMPONENTS
ASSEMBLY
WITHOUT POLE
ANGLE ADJUSTMENT
OPERATION
WITHOUT POLE
CHARGING
WITH POLE
DISPOSAL INFORMATION Please recycle where facilities exist. Check with
your local authority for recycling advice.
CUSTOMER SERVICE If you are having difficulty using this product and
require support, please contact hello@domu.co.uk
(UK/EU) usasupport@domubrands.com (US)
WARRANTY To register your product and find out if you qualify for a free
extended warranty please go to
www.vonhaus.com/warranty. Please retain a
proof of purchase receipt or statement as proof of the purchase date. The
warranty only applies if the product is used solely in the manner indicated on
the warnings page of this manual, and all other instructions have been
followed accurately. Any abuse of the product or the manner in which it is
used will invalidate the warranty. Returned goods will not be accepted unless
re-packaged in their original packaging and accompanied by a relevant and
completed returns form. This does not affect your statutory rights. No rights
are given under this warranty to a person acquiring the appliance second-hand
or for commercial or communal use.
COPYRIGHT All material in this instruction manual is copyrighted by DOMU
Brands. Any unauthorized use may violate worldwide copyright, trademark, and
other laws.
THANK YOU
Thank you for purchasing your product/appliance.
Should you require further assistance with your purchase, you can contact us
athello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US) VonHaus is
a registered trademark of DOMU Brands Ltd. Made in China for DOMU Brands. M24
2RW.
DECLARATION OF CONFORMITY
We:
DOMU Brands Ltd 5th Floor the Tower
Deva City Office Park
Manchester
M3 7BF
Declare under our sole responsibility the product:
SKU: 2500257 8100074
Description: 7.2V 2 in 1 Trimmer.
Complies with the essential requirements of the following Directives.
| 2006/42/EC | 2011/65/EU | 2014/35/EU |
|---|---|---|
| 2014/30/EU | 2000/14/EC | 2006/66/EC |
And the standards
BS EN 60745-1:2009+A11:2010; BS EN 60745-2-15:2009/A1:2010; BS EN
50636-2-94:2014; BS EN 62233:2008; BS EN 55014-1:2017; BS EN 55014-2:2015; BS
EN 61000-3-2:2014; BS EN 61000-3-3:2013; BS EN 60335-1:2012+A11:2014; BS EN
60335-2-29:2004+A2:2010;
BS IEC 62133-1:2012
Authorized signatory on behalf of DOMU Brands Ltd.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>