VonHaus 2515109 2 in 1 Lawn Scarifier Electric Garden Lawn Rake 1500W Instructions
- June 5, 2024
- vonhaus
Table of Contents
** Please read all instructions carefully before use and retain them for
future reference.
CAUTION Do not immerse in water.
Wear a dust mask
CAUTION Sharp edges.
Protect your eyes.
** Protect your ears.
Protect your eyes.
Protect your hands.
**** Please read all instructions carefully before use and retain them for future reference.
INTENDED USE Only operates the power tool/machine for its intended
purpose and within the parameters specified in this manual.
This power tool/machine is for domestic use only. Do not use outdoors or on
wet surfaces.
This power tool/machine is not intended for use by persons with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge
unless supervised or given appropriate instruction concerning the product’s
use by a person responsible for their safety.
GENERAL PRECAUTION Do not allow to be used as a toy. Children should be
supervised to ensure they do not play with the power tool/machine.
If the power tool/machine is not functioning properly, has been dropped,
damaged, left outdoors, or immersed in liquid, do not use, contact DOMU Brands
Customer
Services.
Do not use the power tool/machine if any parts appear to be faulty, missing,
or damaged.
Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY Avoids body contact with earthed or grounded
surfaces such as pipes, radiators, ranges, and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded.
Prevent unintentional starting. Ensure the switch is in the off position
before connecting to the power source and/ or battery pack, picking up or
carrying the tool. Carrying
power tools with your finger on the switch, or energizing power tools that are
switched on, invite accidents.
Do not operate power tools in explosive atmospheres such as in the presence of
flammable liquids, gases or dust. Power tools create sparks that may ignite
dust or fumes. Always wear eye protection. Any power tool can throw foreign
objects into your eyes and cause permanent eye damage. Always wear safety
goggles (not glasses) that comply with ANSI safety standard Z87.1. Everyday
glasses have only impact-resistant lenses. Do not expose power tools to rain
or wet conditions.
Water entering the power tools will increase the risk of electric shock.
Stay alert, watch what you are doing, and use common sense when operating a
power tool/machine. Do not use a power tool/machine while you are tired or
under the influence of drugs, alcohol, or medication. A moment of inattention
while operating a power tool/machine may result in serious personal injury.
Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust masks, non-skid safety shoes, hard hats, or
hearing protection used for appropriate conditions will reduce personal
injuries. Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to a power source and/or battery pack, picking up
or carrying the tool.
Carrying a power tool/machine with your finger on the switch or energizing a
power tool/machine that has the switch on invites accidents.
Remove any adjusting key or spanner before turning the power tool/machine on.
A spanner or a key left attached to a rotating part of the power tool/machine
may result in personal injury. Do not overreach. Keep proper footing and
balance at all times. This enables better control of the power tool/ machine
in unexpected situations. Dress appropriately. Do not wear loose clothing or
jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts. If devices are
provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. The use of dust collection can
reduce dust-related hazards.
WORK AREA SAFETY
Keep the work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools/machines in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools/machines create sparks that may ignite dust or fumes. Keep children and bystanders away while operating a power tool/machine. Distractions can cause you to lose control.
GENERAL POWER TOOL USE AND CARE
Do not force the power tool/machine. Use the correct power tool/machine for
your application. The correct power tool/machine will do the job better and
safer at the rate for which it was designed. Do not use the power tool/machine
if the switch does not turn it on and off. Any power tool/machine that cannot
be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the
power tool/machine before making any adjustments, changing accessories, or
storing power tool/machine tools. Such preventive safety measures reduce the
risk of starting the power tool/machine accidentally.
Store idle power tool/machine out of the reach of children and do not allow
persons unfamiliar with the power tool/ machine or these instructions to
operate the power tool/ machine. Power tools/machines are dangerous in the
hands of untrained users. Maintain power tools/machines. Check for
misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the power tool/machine’s operation. If damaged, have
the power tool/machines repaired before use. Many accidents are caused by
poorly maintained power tools/machines. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control. Use the power tool/machine accessories and
tool bits in accordance with these instructions, and take into account the
working conditions and the work to be performed. Use of the power tool/machine
for operations different from those intended could result in a hazardous
situation.
CLEANING & MAINTENANCE
Never soak or immerse electrical components or a component that has a plug attached.
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing. Such preventive safety measures reduce the
risk of starting the power tool accidentally. Ensure the motor has fully
stopped before cleaning, clearing a blockage, checking, or carrying out any
maintenance on the tool.
Maintain your power tool. Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired by a qualified repair
person before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Regularly check external nuts and fixings to ensure vibration caused by normal use has not begun to loosen them. Store idle power tools out of reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the Breaker. Locate the power tool out of reach of children, in a dry, locked unit. Make sure that the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Remove the plug from the main socket/battery (where applicable) before carrying out any adjustment or maintenance. Always store the power tool/machine in a dry place. If the power cord is damaged, it must be replaced by a qualified service technician. Keep the ventilation slots and motor housing as free of dirt and dust as possible (where applicable). Clean the power tool/machine by rubbing it with a clean cloth and blowing it clean using low-pressure compressed air is recommended.
Ensure you have all the pieces listed. If you are missing any components,
contact our customer services department at
hello@domu.co.uk (UK/EU)
usasuport@domubrands.com (US). DO NOT
proceed with assembly if any components are missing.
Before starting the tool, make sure the tines are not touching any object and
are free to move. Grip the Push Bar firmly with both hands. Never operate with
one hand. Do not overreach – Keep proper footing and balance at all times.
Do not use the tool on a slope that is too steep for safe operation. When on
slopes, slow down and ensure you have good footing. Do not operate the tool
whilst tired or under the influence of alcohol, drugs, or medication. Keep
children, pets, and bystanders away while operating the tool. Distractions can
cause accidents or injury. Walk, never run with the tool.
Do not use the tool for extended periods of time. Use in short periods with
rest in between. The tool produces excessive vibration which can result in
loss of sense of touch, numbness, tingling, and reduced ability to grip. Long-
term exposure can lead to a chronic condition. If necessary, limit the length
of time exposed to vibration and use anti-vibration gloves.
CAUTION The tool may bounce upward and/or jump forward if the tines
strike extremely hard-packed soil, frozen grounds, or buried obstacles such as
large stones, roots, or stumps. If the tool strikes a foreign body, turn it
off immediately and check for the cause. Repair before restarting.
WARNING Do not operate the tool near underground electrical cables,
telephone lines, pipes, or hoses. When charging accessories, always ensure the
machine is unplugged.
TECHNICAL SPECIFICATION
Rated Voltage 230-240V Rated Power 1500W Rated Frequency 50/60Hz
DECLARATION OF CONFORMITY
We:
DOMU Brands Ltd
5th Floor the Tower
Deva City Office Park
Manchester
M3 7BF
Declare under our sole responsibility the product:
SKU: 2515109 / 8160109
Description: VonHaus 1500W 2 in 1 Scarifier
Complies with the essential requirements of the following Directives.
EK006/42/EC 121011/65/EU 13(014/30/EU 94000/14/EC And the standards BS EN 55014-1:2006+A1+A2; BS EN 55014-2:2015; BS EN 6100-3-2:2014; BS EN6100-3-3:2013 BS EN60335-1:2012+A11; BS EN 50636-2-92:2014; BS EN 62233:2008
Authorized signatory on behalf of DOMU Brands Ltd.
1. Power Trigger
2. Safety Switch
3. Cable Relief
4. Top Bar
5. Locking Bolts x 4
6. Centre Supports
7. Grass Basket| 8. Rear Cover
9. Lower Support Bars
10 Adjustment Lever
11. Wheels
12. Accessory Roller 1 (pre-installed) (2515218)
13. Accessory Roller 2 (2515219)
14. Cable Clips x2
---|---
COMPONENTS
ASSEMBLY
OPERATION
Depth Lever Position| | 
---|---|---
1| -12mm| -15mm
2| -8mm| -11mm
3| -4mm| -7mm
4| 4mm Transport| 1mm Transport
WORKING POSITION
Move horizontally on sloped areas.
MAINTENANCE
DISPOSAL INFORMATION
Please recycle where facilities exist. Check with your local authority for
recycling advice.
CUSTOMER SERVICE
If you are having difficulty using this product and require support, please
contact hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
WARRANTY To register your product and find out if you qualify for a free extended warranty please go to www.vonhaus.com/warranty. Please retain a proof of purchase receipt or statement as proof of the purchase date. The warranty only applies if the product is used solely in the manner indicated in the warnings page of this manual, and all other instructions have been followed accurately. Any abuse of the product or the manner in which it is used will invalidate the warranty. Returned goods will not be accepted unless re-packaged in their original packaging and accompanied by a relevant and completed returns form. This does not affect your statutory rights. No rights are given under this warranty to a person acquiring the appliance second-hand or for commercial or communal use.
COPYRIGHT All material in this instruction manual is copyrighted by DOMU Brands. Any unauthorized use may violate worldwide copyright, trademark, and other laws.
THANK YOU
Thank you for purchasing your product/appliance.
Should you require further assistance with your purchase, you can contact us
at hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
VonHaus is a registered trademark of DOMU Brands
Ltd. Made in China for DOMU Brands. M24 2RW.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>